Hitachi H 90SE instruction manual General Safety Rules

Page 4

English

SAFETY

GENERAL SAFETY RULES

WARNING: Read and understand all instructions.

Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS

1. Work Area

 

(1)

Keep your work area clean and well lit. Cluttered benches and dark areas invite

 

accidents.

 

(2)

Do not operate power tools in explosive atmospheres, such as in the presence of

 

flammable liquids, gases, or dust. Power tools create sparks which may ignite the

 

dust of fumes.

(3)

Keep bystanders children, and visitors away while operating a power tool.

 

Distractions can cause you to lose control.

2. Electrical Safety

 

(1)

Double Insulated tools are equipped with a polarized plug (one blade is wider than

 

the other.) This plug will fit in a polarized outlet only one way. If the plug does not

 

fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified

 

electrician to install a polarized outlet. Do not change the plug in any way. Double

 

Insulation

eliminates the need for the three wire grounded power cord and

 

grounded power supply system.

(2)

Avoid body contact with grounded surfaces such as pipes, radiators, ranges and

 

refrigerators. There is an increased risk of electric shock if your body is grounded.

(3)

Don’t expose power tools to rain or wet conditions. Water entering a power tool

 

will increase the risk of electric shock.

(4)

Do not abuse the cord. Never use the cord to carry the tools or pull the plug from

 

a receptacle. Keep cord away from heat, oil, sharp edges or moving parts. Replace

 

damaged cords immediately. Damaged cords increase the risk of electric shock.

(5)

When operating a power tool outside, use an outdoor extension cord marked “W-

 

A” or “W”. These cords are rated for outdoor use and reduce the risk of electric

 

shock.

 

3. Personal Safety

 

(1)

Stay alert, watch what you are doing and use common sense when operating a

 

power tool. Do not use tool while tired or under the influence of drugs, alcohol, or

 

medication. A moment of inattention while operating power tools may result in

 

serious personal injury.

(2)

Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep

 

your hair, clothing and gloves away from moving parts. Loose clothes, jewelry, or

 

long hair can be caught in moving parts.

(3)

Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools

 

with your finger on the switch or plugging in tools that have the switch on invites

4

accidents.

 

Image 4
Contents Avertissement AdvertenciaContents Meanings of Signal Words Important InformationSafety General Safety RulesEnglish Specific Safety Rules and Symbols Carefully handle power tools Do not wipe plastic parts with solventDouble Insulation for Safer Operation Functional Description SpecificationsName of Parts Applications Assembly and OperationPrior to Operation Portion HOW to USE the Demolition Hammer Maintenance and Inspection Service and repairs Accessories Standard AccessoriesHitachi Informations Importantes Signification DES Mots D’AVERTISSEMENTRegles Generale DE Securite SecuriteConserver CES Instructions Français Regles DE Securite Specifiques ET Symboles Utiliser l’outil motorisé correctUtiliser l’outil motorisé à la tension nominale Ne pas essuyer les parties en plastique avec du solvantDouble Isolation Pour UN Fonctionnement Plus SUR Description Fonctionnelle NOM DES PartiesAvant L’UTILISATION Français Comment Utiliser LE Marteau Piqueur Entretien ET Inspection Inspection du marteau piqueurInspection des vis de montage Contrôle de la tige de retenue etRemplacement de graisse Service apres-vente et reparationsAccessoires Accessoires StandardCoupage d’asphalte Fraise Longueur hors tout Información Importante Significado DE LAS Palabras DE SeñalizaciónNormas Generales DE Seguridad SeguridadGuarde Estas Instrucciones Español Utilice las harramientás eléctricas correctas Normas Y Símbolos Específicos DE SeguridadManeje correctamente la herramienta eléctrica Maneje con cuidado las herramientas eléctricas No limpie las partes de plástico con disolventeAislamiento Doble Para Ofrecer UNA Operación MÁS Segura Nomenclatura Descripción FuntionalEspecificaciones Aplicaciones Montaje Y OperaciónAntes DE LA Operación Español Forma DE Usar EL Martillo DE Demolición Mantenimiento E Inspección Inspección del martillo de demoliciónInspección de los tornillos de montaje Inspección del retenedor Figuras 2 yCambio de grasa Servicio y reparacionesAccesorios Accesorios EstándarDíametro exterior Page Page 3MM Hitachi Koki Canada Co