English
SPECIFIC SAFETY RULES AND SYMBOLS
1.Hold tools by insulated gripping surfaces when performing an operation where the tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.
2.Wear ear plugs when using the tool for extended periods. Prolonged exposure to high intensity noise can cause hearing loss.
3.Never touch moving parts.
Never place your hands, fingers or other body parts near the power tool’s moving parts.
4.Never operate without all guards in place.
Never operate this power tool without all guards or safety features in place and in proper working order. If maintenance or servicing requires the removal of a guard or safety feature, be sure to replace the guard or safety feature before resuming operation of the power tool.
5.Use right power tools.
Don’t force a small power tool or attachment to do the job of a
6.Never use a power tool for applications other than those specified.
Never use a power tool for applications other than those specified in the Instruction Manual.
7.Handle tool correctly.
Operate the power tool according to the instructions provided herein. Do not drop or throw the power tool. Never allow the power tool to be operated by children, individuals unfamiliar with its operation or unauthorized personnel.
8.Keep all screws, bolts and covers tightly in place.
Keep all screws, bolts, and plates tightly mounted. Check their condition periodically.
9.Do not use power tools if the plastic housing or handle is cracked.
Cracks in the power tool’s housing or handle can lead to electric shock. Such power tools should not be used until repaired.
10.Blades and accessories must be securely mounted to the power tool.
Prevent potential injuries to youself or others. Blades, cutting implements and accessories which have been mounted to the power tool should be secure and tight.
11.Keep motor air vent clean.
The power tool’s motor air vent must be kept clean so that air can freely flow at all times. Check for dust
12.Operate power tools at the rated voltage.
Operate the power tool at voltages specified on its nameplate.
If using the power tool at a higher voltage than the rated voltage, it will result in abnormally fast motor revolution and may damage the unit and the motor may burn out.
13.Never use the power tool which is defective or operating abnormally.
If the power tool appears to be operating unusually, making strange noises, or otherwise appears defective, stop using it immediately and arrange for repairs by an authorized service center.
14.Never leave the power tool running unattended. Turn power off. Don’t leave the power tool until it comes to a complete stop.
6