Set-Up, Lubrication | Campbell Hausfeld CHN70200 manual

Campbell Hausfeld CHN70200 Set-Up, Lubrication, Minimum Components Required For Hook-up

	Operating Instructions and Parts Manual	CHN70200
	Set-Up
	Lubrication	60 psi Minimum
	This nailer requires no lubrication for normal operation. However, lubrication will	60 psi Minimum

	not harm the tool.	100 psi Maximum
		100 psi Maximum
	The work surface can become damaged by excessive lubrication.	Chart 1
		Chart 1

Minimum Components Required For Hook-up

AIR COMPRESSOR: The air compressor must be able to maintain a minimum of 60 psi when the nailer is being used. An inadequate air supply can cause a loss of power and inconsistent driving (see Chart 1).

PRESSURE REGULATOR: A pressure regulator is required to control the operating pressure of the nailer between 60 psi and 100 psi.

AIR SUPPLY HOSE: Always use air supply hoses with a minimum working pressure rating equal to or greater than the pressure from the power source, or 150 psi, whichever is greater. Use 1/4 inch air hose for runs up to 50 feet. Use 3/8 inch air hoses for 50 ft. run or longer (see Figure 7 and Chart 2).

Hook-up Instructions For Nailer to Air Supply

Figure 8 shows the recommended hookup for the nailer.

NOTE: For better performance, install a 3/8 inch quick plug (1/4 inch NPT threads) with an inside diameter of 0.315 inch (8 mm) on the nailer and a 3/8 inch quick coupler on the air hose.

1.With ON/OFF switch in OFF position, plug compressor into electrical outlet.

2.Close pressure regulator by turning all the way to the left. Turn compressor ON and let it pump all the way up to automatic shut-off pressure.

3.Attach air hose to regulator outlet. Adjust pressure regulator by turning to the right so that outlet pressure is between 60 psi to 100 psi.

4.Load fasteners into nailer (See Loading/Unloading the Nailer section on page 11).

5.Point the nailer in a safe direction while attaching to air hose.

6.Nailer is ready for use. You may need to adjust outlet pressure to achieve proper fastener depth.

Rated 150 psi or greater

Interior Diameter

Figure 7 - Air Hose Requirements

Air Hose Requirements

Diameter	Length of Run

1/4 inch	Less than 50 feet

3/8 inch	Greater than or equal
	to 50 feet

Chart 2

	Outlet
Tank	Pressure
Tank	Gauge
Pressure	Gauge
Pressure
Gauge	Regulator	Quick
	Outlet	Coupler	Quick
			Coupler

Regulator

	Quick
	Plug
	Air	Swivel
	Air	Plug
	Hose	Plug
	Hose
	Figure 8 - Recommended Hookup

10www.chpower.com

CHN70200 specifications

The Campbell Hausfeld CHN70200 is a versatile and reliable air compressor designed to meet the needs of both DIY enthusiasts and professionals. This unit offers a blend of performance and efficiency, making it an excellent choice for a variety of applications, such as inflating tires, powering pneumatic tools, and other tasks requiring a dependable source of compressed air.

One of the standout features of the CHN70200 is its powerful 1.0 horsepower motor, which operates on a 120V outlet, making it suitable for home and garage use. With a maximum pressure of 125 PSI, this air compressor delivers a consistent and reliable airflow, ensuring that it can handle a range of demanding tasks with ease. The 2-gallon vertical tank design not only provides ample air storage but also saves valuable floor space, making it a practical choice for tight work environments.

The CHN70200 is equipped with a quick-connect coupler, allowing users to easily attach and detach air hoses and tools. This convenience reduces downtime during tasks, enabling users to stay productive. Additionally, its noise level is relatively low, thanks to its oil-free pump design, which operates quietly and efficiently. This feature is particularly valuable in residential areas where noise restrictions may be a concern.

Moreover, the oil-free pump technology means that maintenance is minimal. Users do not have to worry about oil changes, which translates to lower operating costs and increased longevity for the compressor. This feature, combined with the lightweight and portable design, makes the Campbell Hausfeld CHN70200 a user-friendly option for those on the go.

Safety is also a priority with the CHN70200 as it comes equipped with built-in safety features, including an automatic thermal overload protection switch. This ensures that the compressor will shut off if it overheats, safeguarding the unit and prolonging its lifespan.

In summary, the Campbell Hausfeld CHN70200 air compressor excels in providing portability, efficiency, and ease of use. Its robust construction and user-friendly features make it a reliable choice for a host of applications, ensuring that whether for casual tasks or more intensive projects, users have access to the power they need. With its combination of features, the CHN70200 stands out as a valuable tool for any toolkit.

Set-Up

Lubrication