Loading / Unloading The Nailer

Campbell Hausfeld CHN70200 Loading / Unloading The Nailer, Loading the Nailer

Operating Instructions and Parts Manual	CHN70200

Set-Up (Continued)

Always disconnect the tool from the air supply before loading / unloading fasteners. Choose which type of fastener you want to use for you project. Additional fasteners can be found at major home centers.

Loading the Nailer

1.Press down on latch and pull back on the magazine cover.

2.Insert a stick of Campbell Hausfeld nails or equivalent (see “Fasteners” section) into the magazine. Make sure the pointed ends of the nails are resting on the bottom ledge of the magazine when loading. Make sure the nails are not dirty or damaged.

3.Push the magazine cover forward until the latch catches.

Unloading the Nailer

1.Press down on latch and pull back on the magazine cover.

2.Remove nails.

3.Push the magazine cover forward until the latch catches.

Adjusting The Nail Penetration

The CHN70200 is equipped with an adjustable depth of drive feature. This allows the user to determine how deep a fastener will be driven into the work surface.

1.Adjust the operating pressure to a pressure which will consistently drive the fasteners. Do not exceed the maximum operating pressure of 100 psi.

2.To drive the nail shallower, turn the wheel to left to the extent desired.

3.To sink a nail deeper, turn the wheel to right to the extent desired.

4.Make sure trigger and work contact element (WCE) move freely up and down without binding or sticking after each adjustment.

Installing No-Mar Tip

1.Disconnect air supply from nailer.

2.Remove no-mar tip from the storage post.

3.Carefully place no-mar tip over the end of work contact element.

4.Check that the WCE and trigger move up and down freely without sticking or binding.

Removing No-Mar Tip

1.Disconnect air supply from nailer.

2.Pry no-mar tip away from the work contact element.

3.Replace no-mar tip onto the storage post for future use.

Figure 9 - Loading the Nailer

Figure 10 - Nail Depth Adjust

No-mar Tip

Storage

Post

Figure 11 - No-mar Tip

www.chpower.com 11

CHN70200 specifications

The Campbell Hausfeld CHN70200 is a versatile and reliable air compressor designed to meet the needs of both DIY enthusiasts and professionals. This unit offers a blend of performance and efficiency, making it an excellent choice for a variety of applications, such as inflating tires, powering pneumatic tools, and other tasks requiring a dependable source of compressed air.

One of the standout features of the CHN70200 is its powerful 1.0 horsepower motor, which operates on a 120V outlet, making it suitable for home and garage use. With a maximum pressure of 125 PSI, this air compressor delivers a consistent and reliable airflow, ensuring that it can handle a range of demanding tasks with ease. The 2-gallon vertical tank design not only provides ample air storage but also saves valuable floor space, making it a practical choice for tight work environments.

The CHN70200 is equipped with a quick-connect coupler, allowing users to easily attach and detach air hoses and tools. This convenience reduces downtime during tasks, enabling users to stay productive. Additionally, its noise level is relatively low, thanks to its oil-free pump design, which operates quietly and efficiently. This feature is particularly valuable in residential areas where noise restrictions may be a concern.

Moreover, the oil-free pump technology means that maintenance is minimal. Users do not have to worry about oil changes, which translates to lower operating costs and increased longevity for the compressor. This feature, combined with the lightweight and portable design, makes the Campbell Hausfeld CHN70200 a user-friendly option for those on the go.

Safety is also a priority with the CHN70200 as it comes equipped with built-in safety features, including an automatic thermal overload protection switch. This ensures that the compressor will shut off if it overheats, safeguarding the unit and prolonging its lifespan.

In summary, the Campbell Hausfeld CHN70200 air compressor excels in providing portability, efficiency, and ease of use. Its robust construction and user-friendly features make it a reliable choice for a host of applications, ensuring that whether for casual tasks or more intensive projects, users have access to the power they need. With its combination of features, the CHN70200 stands out as a valuable tool for any toolkit.