Campbell Hausfeld CHN70200 Personal Safety, Electrical Safety, Tool Use and Care

Page 5

Operating Instructions and Parts Manual

CHN70200

 

 

Important Safety Information (Continued)

Personal Safety

a.Stay alert.Watch what you are doing and use common sense when operating the tool. Do not use the tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool increases the risk of injury to persons.

b.Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair increases the risk of injury to persons as a result of being caught in moving parts.

c. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

d.Use safety equipment. A dust mask, non-skid safety shoes and a hard hat must be used for the applicable conditions.

Ensuring that the tool is used only when the operator and all

other personnel in the work area are wearing ANSI Z87 eye protection equipment, and when required, other appropriate protection equipment such as head, hearing

and foot protection equipment. Serious eye or permanent hearing loss could result.

e. Always wear hearing protection when using the tool. Prolonged exposure to high intensity noise is able to cause hearing loss.

f.Do not attach the hose or tool to your body.

Attach the hose to the structure to reduce the risk of loss of balance if the hose shifts.

g.Always assume that the tool contains fasteners. Do not point the tool toward yourself or anyone whether it contains fasteners or not.

Do not drop or throw the tool. Dropping

or throwing the tool can result in damage that will make the tool unusable or unsafe. If the tool has been dropped or thrown, examine the tool closely for bent, cracked or broken parts and air leaks. STOP and repair before using or serious injury could occur.

Avoid long extended periods of work with the nailer. Stop using the nailer if you feel pain in

hands or arms.

Hold tool by insulated gripping surface when performing an operation where the tool or

fastener may contact hidden wiring. Contacting a “live” wire will make exposed metal parts of the tool “live” and shock the operator.

This is a Class IIIA

Laser Product that laser radiation

h.Never look directly into

the laser beam or its direct reflection. Lasers are harmful to the eyes.

i. Do not set up the tool

 

at eye level or operate

 

the tool on or near a

 

reflective surface. The

 

laser beam could be

 

projected into your own or

 

someone else’s eyes.

Figure 2

Never place hands or any other body parts in the nail discharge area

of the nailer.The nailer might eject a fastener and could result in death or serious personal injury.

Electrical Safety

Replace batteries only with same size batteries. Do not mix old and

new batteries. Using wrong size batteries can create a risk of fire or injury.

The front end of the tool may be made “live” if the tool comes

into contact with live wiring in the wall.TO PREVENT ACCIDENTAL ELECTRICAL SHOCK, HOLD TOOL ONLY BY THE SOFT GRIP HANDLE.

Tool Use and Care

a.Do not force the tool. Use the correct tool for the application. The correct tool will do the job better and safer at the rate for which the tool is designed.

Disconnect the tool from the air source before making adjustments, doing tool maintenance,

clearing jams, touching the safety yoke, leaving work area, loading, or unloading the tool. Such precautionary measures reduce the risk of injury to persons.

b.Store the tool when it is idle out of reach of children and other untrained persons. A tool is dangerous in the hands of untrained users.

c.Maintain the tool with care. A properly maintained tool reduces the risk of problems and is easier to control.

d.Use only those fasteners listed in the “Fastener Interchange Information” section on page 12 of this manual. Fasteners not identified for use with this tool by the tool manufacturer are able to result in a risk of injury to persons or tool damage when used in this tool.

www.chpower.com

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Brad Nailer Table of Contents Model CHN70200 SpecificationsDescription Important Safety Information Safety GuidelinesSafety Symbols Tool Use and Care Personal SafetyElectrical Safety Do not expose tool to extreme heat Unpacking AssemblyQuick Coupler GlossaryGetting To Know Your Brad Nailer Like a Pro FeaturesLubrication Set-UpMinimum Components Required For Hook-up Hook-up Instructions For Nailer to Air SupplyInstalling No-Mar Tip Adjusting The Nail PenetrationLoading / Unloading The Nailer Loading the NailerPre-Operation Electronic ON/OFF Switch Electronics on / OFF SwitchFiring the Nailer OperationStorage MaintenanceFasteners Technical ServiceFastener Interchange Information Symptom Cause Solution Troubleshooting GuideFor Replacement Parts or Technical Assistance, Call Part Description Qty Replacement Parts List for Brad NailerWhat is not Covered Under this Warranty WarrantyCloueuse à Clous sans Tête Table des Matières Pour l’information sur les pièces, produits et servicesModèle CHN70200 SpécificationsImportantes Instructions De Sécurité Symboles de sécuritéDirectives de Sécurité Sécurité personnelle Importantes Instructions De Sécurité SuiteSécurité Électrique Utilisation et entretien de l’outilNe pas exposer l’outil à une chaleur extrême Assemblage DéballageContenu Autres Articles NON InclusRaccord Rapide GlossaireCaractéristiques Lubrification InstallationComposants Minimaux Requis Pour LE Raccord Diamètre Longueur ’acheminementInstaller L’EMBOUT ANTI-MARQUES Installation suiteCHARGER/DÉCHARGER LA Cloueuse Ajuster LA Pénétration DU ClouPointe DE Contact PC Pré-opérationModes D’OPÉRATION Interrupteur MARCHE/ARRÊT Électronique Pré-opération SuiteUtiliser LA Cloueuse FonctionnementEntretien RangementEntretien Suite Service TechniqueInformation SUR LES Attaches Interchangeables AttachesSymptôme Causes possibles Action corrective Guide de dépannagePour pièces de rechange ou assistance technique, appeler Trousses DE Pièces DE Rechange LA Présente Garantie NE Couvre PAS Garantie LimitéeClavadora para Acabado Por información sobre piezas, productos y servicios ÍndiceEspecificaciones DescripciónSímbolos de seguridad Medidas de SeguridadImportantes Instrucciones De Seguridad Proposición 65 de CaliforniaSeguridad Personal Importantes Instrucciones De Seguridad ContinuaciónSeguridad Eléctrica Uso y Cuidado de la HerramientaNo exponga la herramienta a calor extremo Ensamblaje DesempaqueGuarde Estas Instrucciones No LAS Deseche ContenidosFigura Acoplador rápido GlosarioCaracterísticas Conozca su clavadora de puntillas como un profesionalLubricación ConfiguraciónComponentes Mínimos Necesarios Para LA Conexión Diámetro Largo del RecorridoPara Cargar Y Descargar LA Clavadora Configuración ContinuaciónAjuste DE LA Penetración DEL Clavo Instalación DE LA Punta AntirrayonesElemento DE Contacto DE Trabajo WCE Pre-FuncionamientoModos DE Funcionamiento Figura Pre-Funcionamiento continuaciónDisparo DE LA Clavadora FuncionamientoMantenimiento Funcionamiento continuaciónAlmacenamiento Procedimiento DE Ensamblaje Para LOS Sellos Mantenimiento continuaciónServicio Técnico Información DE Intercambio DE SujetadoresProblema Causa Solución Guía de resolución de problemasSírvase proporcionar la siguiente información No. de Número de Descripción Repuesto Ctd Lista de piezas de repuesto para la clavadora para acabadoLO QUE no Esta Cubierto POR Esta Garantia Garantía Limitada

CHN70200 specifications

The Campbell Hausfeld CHN70200 is a versatile and reliable air compressor designed to meet the needs of both DIY enthusiasts and professionals. This unit offers a blend of performance and efficiency, making it an excellent choice for a variety of applications, such as inflating tires, powering pneumatic tools, and other tasks requiring a dependable source of compressed air.

One of the standout features of the CHN70200 is its powerful 1.0 horsepower motor, which operates on a 120V outlet, making it suitable for home and garage use. With a maximum pressure of 125 PSI, this air compressor delivers a consistent and reliable airflow, ensuring that it can handle a range of demanding tasks with ease. The 2-gallon vertical tank design not only provides ample air storage but also saves valuable floor space, making it a practical choice for tight work environments.

The CHN70200 is equipped with a quick-connect coupler, allowing users to easily attach and detach air hoses and tools. This convenience reduces downtime during tasks, enabling users to stay productive. Additionally, its noise level is relatively low, thanks to its oil-free pump design, which operates quietly and efficiently. This feature is particularly valuable in residential areas where noise restrictions may be a concern.

Moreover, the oil-free pump technology means that maintenance is minimal. Users do not have to worry about oil changes, which translates to lower operating costs and increased longevity for the compressor. This feature, combined with the lightweight and portable design, makes the Campbell Hausfeld CHN70200 a user-friendly option for those on the go.

Safety is also a priority with the CHN70200 as it comes equipped with built-in safety features, including an automatic thermal overload protection switch. This ensures that the compressor will shut off if it overheats, safeguarding the unit and prolonging its lifespan.

In summary, the Campbell Hausfeld CHN70200 air compressor excels in providing portability, efficiency, and ease of use. Its robust construction and user-friendly features make it a reliable choice for a host of applications, ensuring that whether for casual tasks or more intensive projects, users have access to the power they need. With its combination of features, the CHN70200 stands out as a valuable tool for any toolkit.
Top Page Image Contents