Model SB1019 | O P E R A T I O N | For Machines Mfg. Since 8/09 |
Description of Controls & Components
Refer to Figure 14 and the following descriptions to become familiar with the basic controls and components used to operate this machine.
A.Blade Tension Knob: Adjusts the position of the upper blade wheel to apply or release blade tension.
B.Guide Post Knob: Locks the guide post in the position set by the operator.
C.ON/OFF Switch: Turns the saw motor ON & OFF.
D.Speed Selector: Selects one of three blade speeds.
E.Downfeed Rate Adjust Knob: Controls the speed at which the blade lowers into the workpiece.
F.Downfeed Valve: Controls the starting and stopping of the headstock downfeed.
G.Downfeed Stop Bolt: Adjusts to determine the absolute bottom limit of blade travel.
H.Headstock 0° Flip Stop: Provides an optional stop for square cuts.
I.Headstock 45° Stops: Provide stops at 45° to the left and right for angle cuts.
J.Vise Jaw Handwheel: Controls the vise jaw movement.
K.Vise Jaw Quick Release Lever: Quickly opens and closes the vise jaw approximately
1⁄16" for repetitive repositioning/clamping in a production setting.
L.Headstock Lock Lever: Locks the headstock at the position set by the operator.
M.Work Stop: Provides an adjustable stop for cutting multiple workpieces at the same length.
| B | C | D |
A |
|
|
|
K |
|
|
|
L | M |
|
|
|
|
| |
|
|
| E |
|
|
| F |
|
|
| G |
J |
|
|
|
|
|
| H |
| I |
|
|