Carrier 50TJ016-028 specifications Base Unit Dimensions, 50TJ016,020

4

	STD UNIT		ECONOMI$ER		CORNER			CORNER			CORNER			CORNER			DIM A		DIM B		DIM C
UNIT	WEIGHT		WEIGHT			(A)			(B)			(C)			(D)
	Lb	Kg	Lb	Kg	Lb		Kg	Lb		Kg	Lb		Kg	Lb		Kg	Ft-in.	mm	Ft-in.	mm	Ft-in.	mm
50TJ016	1550	703	80	36.3	391		177	365		166	384		174	410		186	3-5	1041	3-6	1067	1-10	559
50TJ020	1650	748	80	36.3	399		181	384		174	402		182	439		199	3-4	1016	3-6	1067	1- 8	508

NOTES:
1.	Refer to print for roof curb accessory dimensions.
2.	Dimensions in [		] are in millimeters.
3.		Center of gravity.
4.		Direction of airflow.
5.	Ductwork to be attached to accessory roof curb only.
6.	Minimum clearance:
	•	Rear: 7′-0″	(2134) for coil removal. This dimension can be
		reduced to 4′-0″(1219) if conditions permit coil removal from the
		top.
	•	Left side: 4′-0″(1219) for proper condenser coil airflow.
	•	Front: 4′-0″(1219) for control box access.
	•	Right side: 4′-0″(1219) for proper operation of damper and
		power exhaust if so equipped.
	•	Top: 6′-0″(1829) to assure proper condenser fan operation.
	•	Local codees or jurisdiction may prevail.
7.	With the exception of clearance for the condenser coil and the
	damper/power exhaust as stated in Note #6, a removable fence or
	barricade requires no clearance.
8.	Dimensions are from outside of corner post. Allow 0′-5/16″(8) on
	each side for top cover drip edge.
9.	See drawing 50TJ500352 for service option details.

POWER EXHAUST/BAROMETRIC RELIEF (ACCESSORY ONLY)

Fig. 4 — Base Unit Dimensions, 50TJ016,020