KitchenAid KBPU182VSS Installation Instructions, Install Tank Tray for 20 lb LP Gas Fuel Tank

Page 11

The gas supply line shall be equipped with an approved shutoff valve. This valve should be located in the same area as the Power™ burner and should be in a location that allows ease of opening and closing. Do not block access to the shutoff valve. The valve is for turning on or shutting off gas to the Power™ burner.

B

A

C

A. Gas supply line

B. Shutoff valve “open” position

C. To Power™ burner

Natural Gas Conversion

Conversion must be made by a qualified gas technician. The qualified Natural gas technician shall provide the Natural gas supply to the selected Power™ burner location in accordance with the National Fuel Gas Code ANSI Z223.1/NFPA 54 - latest edition, and local codes. For conversion to Natural gas, the Natural gas conversion kit supplied with the Power™ burner must be used.

IMPORTANT: The gas installation must conform with local codes, or in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA 54 - latest edition.

To convert to Natural gas, the Natural Gas Conversion Kit supplied with the Power™ burner must be used.

Follow instructions for converting to Natural gas in the “Gas Conversions” section.

A

B

C

A. New CSA International approved “outdoor” flexible gas supply line

B. Rear of Power™ burner C. To Natural gas supply

The gas supply line shall be equipped with an approved shutoff valve. This valve should be located in the same area as the Power™ burner and should be in a location that allows ease of opening and closing. Do not block access to the shutoff valve. The valve is for turning on or shutting off gas to the Power™ burner.

B

A

C

A. Gas supply line

B. Shutoff valve “open” position

C. To Power™ burner

INSTALLATION INSTRUCTIONS

Built-in Outdoor Power™ Burner Installation

WARNING

Excessive Weight Hazard

Use two or more people to move and install side burner.

Failure to do so can result in back or other injury.

Unpack Power™ burner. Remove all packaging materials and remove Power™ burner from carton.

Place Power™ burner into outdoor enclosure, but leave enough room in back to connect to gas supply and electrical single prong plug-in.

Install Tank Tray for 20 lb LP Gas Fuel Tank

1.Position the tank tray for 20 lb LP gas fuel tank in the island cabinet.

2¹⁄₄"

(5.7 cm)

centerline of tank tray

 

 

A

20⁵⁄₈"

18³⁄₈"

B

(52.4 cm)

(46.7 cm)

 

A. 8³⁄₃₂" (20.6 cm) B. 16³⁄₁₆" (41.1 cm)

11

Image 11
Contents Outdoor BUILT-IN Power Burner Your safety and the safety of others are very important Outdoor BUILT-IN Power Burner SafetyQuincy, Massachusetts Cleveland, Ohio Important Safety InstructionsTable DES Matières Table of ContentsLocation Requirements Installation RequirementsProduct Dimensions Tools and PartsMaker Ice Cabinet Dimensions13½ 34.3 cm 10⁵⁄₈ 27.0 cm 22¹¹⁄₁₆ 57.6 cm Between a Trash Drawer, Utility Drawer, or Warming Drawer= 3 7.6 cm 19³⁄₈ 49.2 cm 10¾ 27.3 cm 19¾ 50.2 cm30½ 77.5 cm 10¾ 27.3 cm 23 58.4 cm Built-in Outdoor Grill Enclosure Ventilation for LP GasRecommended Ground Method Electrical RequirementsGas Supply Requirements Gas Connection Requirements Natural Gas Conversion Installation InstructionsInstall Tank Tray for 20 lb LP Gas Fuel Tank Make Gas Connection Gas Connection to Natural Gas or Local LP Gas To Install the 20 lb LP Gas Fuel TankLift off cover and grate and set aside Plug in Power BurnerAssemble Cooking Area Conversion to a Local LP Gas Supply Installation of the regulatorGAS Conversions Tools and Parts for Gas ConversionRecord Conversion Make Power Burner Connections Connect Local LP Gas SupplyConversion from LP Gas to Natural Gas Reinstall cap onto convertible regulator Change the Power burner orificesHook up to Natural gas and Leak Test Check and Adjust the BurnersLow Flame Adjustment Power Burner Use Using Your Outdoor Power BurnerRemove the outdoor Power burner cover Lighting Your Power BurnerManually lighting the Power burner Do not soak knobs Outdoor Power Burner CareGeneral Cleaning Cleaning MethodU.S.A TroubleshootingAssistance or Service AccessoriesCall Kitchenaid Outdoor Product WarrantyThis limited warranty does not cover Page Votre sécurité et celle des autres est très importante Sécurité DU Brûleur Dextérieur Encastré PowerConservez CES Instructions Dimensions du placard Exigences DinstallationDimensions du produit Exigences demplacementPlan 13½ 34,3 cm 10⁵⁄₈ 27 cm 22¹¹⁄₁₆ 57,6 cm Dimension C Dimension D Dimension E= 3 7,6 cm 19³⁄₈ 49,2 cm 10¾ 27,3 cm 19¾ 50,2 cm30½ 77,5 cm 10¾ 27,3 cm 23 58,4 cm Taille de la porte Dimension F Dimension LSpécifications de lalimentation en gaz Méthode recommandée de mise à la terreSpécifications électriques Puissance thermique des brûleurs en altitude Exigences concernant le raccordement au gazDétendeur Bouteille de propane de 20 lbConversion pour lalimentation au gaz naturel Instructions ’INSTALLATIONInstallation du brûleur dextérieur Encastré Power Installation du chariot de bouteille de gaz propane de 20 lb Raccordement à une bouteille de gaz propane de 20 lb Installation de la bouteille de propane de 20 lbRaccordement de gaz Alimentation au gaz naturel ou au gaz propane local Branchement du brûleur PowerSoulever le couvercle et la grille et les mettre de côté Installation de la surface de cuissonConversion au gaz propane local Installation du détendeurConversions DE GAZ Outillage et pièces pour la conversion de gazEnregistrer la conversion Conversion du gaz propane au gaz naturelEnlever la grille du brûleur Power Remplacement des gicleurs du brûleur Power11. Réinstaller le chapeau sur le détendeur convertible Raccordement au gaz naturel et recherche de fuites 10. Réinstaller le cerclage supérieur du brûleur interne12. Réinstaller la grille de brûleur Contrôle et réglage des brûleursUtilisation du brûleur Power Utilisation DU Brûleur Power DextérieurPlacer le wok sur le cerclage de wok Allumage du brûleur PowerAllumage manuel du brûleur Power Détergent doux, chiffon doux et eau tiède Rincer et sécher Entretien DU Brûleur Power DextérieurNettoyage général Méthode de nettoyageAu Canada Assistance OU ServiceAccessoires DépannageComposer le 1-800-422-1230. Au Canada, composer le Garantie DES Produits Pour Usage Extérieur KitchenaidLa présente garantie limitée ne couvre pas Page All rights reserved W10243318B

KBPU182VSS specifications

The KitchenAid KBPU182VSS is a standout appliance that perfectly combines style and functionality for modern kitchens. This built-in refrigerator is designed to enhance the food storage experience, offering a range of features that cater to performance and aesthetics alike.

One of the most notable features of the KBPU182VSS is its spacious interior, with a capacity of 18 cubic feet, which allows ample room for groceries, leftovers, and culinary ingredients. The stainless steel finish adds a sleek and contemporary look, making it a perfect fit for various kitchen designs. This model seamlessly integrates into cabinetry, ensuring a polished and cohesive kitchen appearance.

The refrigerator is equipped with the advanced FreshSeal technology that helps to keep food fresher for longer. This is achieved through enhanced cooling capabilities that maintain consistent temperatures. The cooling system utilizes a dual evaporator, which is essential for optimal humidity control. This feature prevents odor mixing between the fridge and freezer, ensuring that everything—from meats to fruits—remains flavorful and fresh.

Organization is another key aspect of the KBPU182VSS. It features adjustable shelves that allow users to customize the interior layout according to their storage needs. The produce drawers are specifically designed to maintain ideal humidity levels for fruits and vegetables, prolonging their freshness. Additionally, the model comes with specialized storage for beverages, dairy, and other commonly used items, promoting convenience in access.

One innovative feature is the vibrant LED lighting that illuminates the interior, making it easy to find items quickly, even in low-light conditions. The door bins are designed for easy access and can accommodate larger bottles and containers, proving to be a practical solution for busy households.

The KitchenAid KBPU182VSS also boasts energy-efficient technology, reducing its environmental impact while keeping energy bills low. This is in line with KitchenAid's commitment to sustainability, giving customers peace of mind regarding their energy consumption.

In summary, the KitchenAid KBPU182VSS perfectly melds style, functionality, and technology, making it an excellent choice for anyone looking to upgrade their kitchen. Its thoughtful design features, advanced cooling technologies, and organization options set it apart in the competitive market of built-in refrigerators, satisfying both aesthetic and practical needs.