KitchenAid KBPU182VSS Outdoor Power Burner Care, General Cleaning, Cleaning Method

Page 21

OUTDOOR POWER™ BURNER CARE

General Cleaning

IMPORTANT: Before cleaning, make sure all controls are off and the Power™ burner is cool. Always follow label instructions on cleaning products.

For routine cleaning, wash with soap and water using a soft cloth or sponge. Rinse with clean water and dry at once with a soft, lint-free cloth to avoid spots and streaks.

Do not use steel wool to clean the Power™ burner, as it will scratch the surface.

To avoid weather damage to finish, use stainless steel Power™ burner cover.

STAINLESS STEEL

IMPORTANT: To avoid damage to stainless steel surfaces, do not use soap-filled scouring pads, abrasive cleaners, Cooktop Polishing Creme, steel wool, gritty wash cloths or paper towels.

To avoid damage to the finish, cleaners should not contain chlorine.

Food spills should be cleaned as soon as entire Power™ burner is cool. Spills may cause permanent discoloration.

Cleaning Method:

Rub in direction of grain to avoid scratching or damaging the surface.

KitchenAid® Stainless Steel Cleaner and Polish Part Number 4396920 (not included) or KitchenAid® Stainless Steel Wipes Part Number 8212510 (not included):

See “Assistance or Service” section to order.

Liquid detergent or all-purpose cleaner:

Rinse with clean water and dry with soft, lint-free cloth.

Vinegar to remove hard water spots.

Glass cleaner to remove fingerprints.

EXTERIOR

The quality of this material resists most stains and pitting, providing that the surface is kept clean, polished and covered.

Apply stainless steel polish to all non-cooking areas before first use. Reapply after each cleaning to avoid permanent damage to surface.

Cleaning should always be followed by rinsing with clean warm water.

Wipe the surface completely dry with a soft cloth.

For tough spots or baked-on grease, use Kitchen and BBQ Grill Degreaser Part Number 31617, a commercial degreaser designed for stainless steel.

See “Assistance or Service” section to order.

INTERIOR

Discoloration of stainless steel on these parts is to be expected, due to intense heat from the burners. Always rub in the direction of the grain. Cleaning should always be followed by rinsing with clean, warm water.

Cleaning Method:

Liquid detergent or all-purpose cleaner.

Rinse with clean water and dry completely with a soft, lint- free cloth.

A heavy-duty scrub sponge can be used with mild cleaning products.

For small, difficult-to-clean areas, use Kitchen and BBQ Grill Degreaser Part Number 31617, a commercial degreaser designed for stainless steel.

See “Assistance or Service” section to order.

POWER™ BURNER CAPS AND GRATE

Cleaning Method:

Clean with a brass bristle brush.

Wash grate using mild detergent, warm water and degreaser.

Rinse with clean water and dry with soft, lint-free cloth.

KitchenAid® Stainless Steel Cleaner and Polish Part Number 4396920 (not included) or KitchenAid® Stainless Steel Wipes Part Number 8212510 (not included):

See “Assistance or Service” section to order.

KNOBS AND FLANGE AREA AROUND KNOBS

IMPORTANT: To avoid damage to knobs or to flange area around knobs, do not use steel wool, abrasive cleaners, or oven cleaner.

Do not soak knobs.

Cleaning Method:

Mild detergent, a soft cloth and warm water.

Rinse and dry.

CONTROL PANEL GRAPHICS

IMPORTANT: To avoid damage to control panel graphics, do not use steel wool, abrasive cleaners or oven cleaner.

Do not spray cleaner directly onto panel.

Cleaning Method:

Clean around the burner labels gently; scrubbing may remove printing.

Mild detergent, soft cloth and warm water.

Rinse and dry.

21

Image 21
Contents Outdoor BUILT-IN Power Burner Your safety and the safety of others are very important Outdoor BUILT-IN Power Burner SafetyQuincy, Massachusetts Cleveland, Ohio Important Safety InstructionsTable DES Matières Table of ContentsProduct Dimensions Installation RequirementsTools and Parts Location RequirementsMaker Ice Cabinet Dimensions= 3 7.6 cm Between a Trash Drawer, Utility Drawer, or Warming Drawer19³⁄₈ 49.2 cm 10¾ 27.3 cm 19¾ 50.2 cm 13½ 34.3 cm 10⁵⁄₈ 27.0 cm 22¹¹⁄₁₆ 57.6 cm30½ 77.5 cm 10¾ 27.3 cm 23 58.4 cm Built-in Outdoor Grill Enclosure Ventilation for LP GasElectrical Requirements Gas Supply RequirementsRecommended Ground Method Gas Connection Requirements Installation Instructions Install Tank Tray for 20 lb LP Gas Fuel TankNatural Gas Conversion Make Gas Connection Gas Connection to Natural Gas or Local LP Gas To Install the 20 lb LP Gas Fuel TankPlug in Power Burner Assemble Cooking AreaLift off cover and grate and set aside GAS Conversions Installation of the regulatorTools and Parts for Gas Conversion Conversion to a Local LP Gas SupplyMake Power Burner Connections Connect Local LP Gas Supply Conversion from LP Gas to Natural GasRecord Conversion Reinstall cap onto convertible regulator Change the Power burner orificesCheck and Adjust the Burners Low Flame AdjustmentHook up to Natural gas and Leak Test Power Burner Use Using Your Outdoor Power BurnerLighting Your Power Burner Manually lighting the Power burnerRemove the outdoor Power burner cover General Cleaning Outdoor Power Burner CareCleaning Method Do not soak knobsAssistance or Service TroubleshootingAccessories U.S.AKitchenaid Outdoor Product Warranty This limited warranty does not coverCall Page Votre sécurité et celle des autres est très importante Sécurité DU Brûleur Dextérieur Encastré PowerConservez CES Instructions Dimensions du produit Exigences DinstallationExigences demplacement Dimensions du placardPlan = 3 7,6 cm Dimension C Dimension D Dimension E19³⁄₈ 49,2 cm 10¾ 27,3 cm 19¾ 50,2 cm 13½ 34,3 cm 10⁵⁄₈ 27 cm 22¹¹⁄₁₆ 57,6 cm30½ 77,5 cm 10¾ 27,3 cm 23 58,4 cm Taille de la porte Dimension F Dimension LMéthode recommandée de mise à la terre Spécifications électriquesSpécifications de lalimentation en gaz Détendeur Exigences concernant le raccordement au gazBouteille de propane de 20 lb Puissance thermique des brûleurs en altitudeInstructions ’INSTALLATION Installation du brûleur dextérieur Encastré PowerConversion pour lalimentation au gaz naturel Installation du chariot de bouteille de gaz propane de 20 lb Installation de la bouteille de propane de 20 lb Raccordement de gazRaccordement à une bouteille de gaz propane de 20 lb Alimentation au gaz naturel ou au gaz propane local Branchement du brûleur PowerSoulever le couvercle et la grille et les mettre de côté Installation de la surface de cuissonConversions DE GAZ Installation du détendeurOutillage et pièces pour la conversion de gaz Conversion au gaz propane localEnregistrer la conversion Conversion du gaz propane au gaz naturelRemplacement des gicleurs du brûleur Power 11. Réinstaller le chapeau sur le détendeur convertibleEnlever la grille du brûleur Power 12. Réinstaller la grille de brûleur 10. Réinstaller le cerclage supérieur du brûleur interneContrôle et réglage des brûleurs Raccordement au gaz naturel et recherche de fuitesUtilisation du brûleur Power Utilisation DU Brûleur Power DextérieurAllumage du brûleur Power Allumage manuel du brûleur PowerPlacer le wok sur le cerclage de wok Nettoyage général Entretien DU Brûleur Power DextérieurMéthode de nettoyage Détergent doux, chiffon doux et eau tiède Rincer et sécherAccessoires Assistance OU ServiceDépannage Au CanadaGarantie DES Produits Pour Usage Extérieur Kitchenaid La présente garantie limitée ne couvre pasComposer le 1-800-422-1230. Au Canada, composer le Page All rights reserved W10243318B

KBPU182VSS specifications

The KitchenAid KBPU182VSS is a standout appliance that perfectly combines style and functionality for modern kitchens. This built-in refrigerator is designed to enhance the food storage experience, offering a range of features that cater to performance and aesthetics alike.

One of the most notable features of the KBPU182VSS is its spacious interior, with a capacity of 18 cubic feet, which allows ample room for groceries, leftovers, and culinary ingredients. The stainless steel finish adds a sleek and contemporary look, making it a perfect fit for various kitchen designs. This model seamlessly integrates into cabinetry, ensuring a polished and cohesive kitchen appearance.

The refrigerator is equipped with the advanced FreshSeal technology that helps to keep food fresher for longer. This is achieved through enhanced cooling capabilities that maintain consistent temperatures. The cooling system utilizes a dual evaporator, which is essential for optimal humidity control. This feature prevents odor mixing between the fridge and freezer, ensuring that everything—from meats to fruits—remains flavorful and fresh.

Organization is another key aspect of the KBPU182VSS. It features adjustable shelves that allow users to customize the interior layout according to their storage needs. The produce drawers are specifically designed to maintain ideal humidity levels for fruits and vegetables, prolonging their freshness. Additionally, the model comes with specialized storage for beverages, dairy, and other commonly used items, promoting convenience in access.

One innovative feature is the vibrant LED lighting that illuminates the interior, making it easy to find items quickly, even in low-light conditions. The door bins are designed for easy access and can accommodate larger bottles and containers, proving to be a practical solution for busy households.

The KitchenAid KBPU182VSS also boasts energy-efficient technology, reducing its environmental impact while keeping energy bills low. This is in line with KitchenAid's commitment to sustainability, giving customers peace of mind regarding their energy consumption.

In summary, the KitchenAid KBPU182VSS perfectly melds style, functionality, and technology, making it an excellent choice for anyone looking to upgrade their kitchen. Its thoughtful design features, advanced cooling technologies, and organization options set it apart in the competitive market of built-in refrigerators, satisfying both aesthetic and practical needs.