Graco 312001R important safety instructions Magnum ProX7 Magnum ProX9 Series B

Technical Data

	MAGNUM ProX7	MAGNUM ProX9
	(Series B)	(Series B)
Working pressure range	0-3000 psi (0-21 MPa, 0-207 bar)
Electric motor	5.8A	9.4A
	(open frame, permanent magnet DC)	(open frame, permanent magnet DC)
Operating horsepower	3/4	7/8
Maximum delivery (with tip)	0.34 gpm (1.29 lpm)	0.38 gpm (1.44 lpm)
Paint hose	1/4 in. x 50 ft (6.4 mm x 15 m)
Maximum tip hole size	0.017 in. (0.43 mm)	0.019 in. (0.48 mm)
Weight, sprayer only	33 lb (15 kg)
Weight, sprayer, hose & gun	36 lb (16 kg)
Dimensions (Upright):
Length	23.75 in. (60.32 cm)
Width	17.5 in. (44.45 cm)
Height	36.5 in. (92.71 cm)
Dimensions (Folded Handle):
Length	23.25 in. (59.05 cm)
Width	17.5 in. (44.45 cm)
Height	22.00 in. (55.88 cm)
Power cord	16 AWG, 3-wire, 6 ft (1.8 m)
Fluid inlet fitting	3/4 in. internal thread (standard garden hose thread)
Fluid outlet fitting	1/4 NPSM external thread
Inlet screen (on suction tube)	35 mesh (450 micron)
Wetted parts, pump & hose	stainless steel, brass, leather, ultra-high molecular weight polyethylene
	(UHMWPE), carbide, nylon, aluminum, PVC, polypropylene, fluroelastomer
Wetted parts, gun	aluminum, brass, carbide, nylon, plated steel, stainless steel,
	UHMWPE, zinc
Generator requirement	1500 Watt minimum
Electrical power requirement	120 Vac, 60 Hz, 15A, 1 phase
Storage temperature range ◆❖	-30° to 160°F (-35° to 71°C)
Operating temperature range ✔	40° to 115°F (4° to 46°C)

◆When pump is stored with non-freezing fluid. Pump damage will occur if water or latex paint freezes in pump. ❖ Damage to plastic parts may result if impact occurs in low temperature conditions.

✔ Changes in paint viscosity at very low or very high temperatures can affect sprayer performance.

312001R 31