Technical Data
Technical Data
| MAGNUM X5 (Series D) | MAGNUM X7 (Series C) |
|
|
|
Working pressure range | ||
|
|
|
Electric motor | 9.0A (open frame, universal) | 9.0A (open frame, universal) |
|
|
|
Operating horsepower | 1/2 | 5/8 |
|
|
|
Maximum delivery (with tip) | 0.27 gpm (1.02 lpm) | 0.31 gpm (1.17 lpm) |
|
|
|
Paint hose | 1/4 in. x 25 ft (6.4 mm x 7.5 m) | 1/4 in. x 25 ft (6.4 mm x 7.5 m) |
|
|
|
Maximum tip hole size | 0.015 in. (0.38 mm) | 0.017 in. (0.43 mm) |
|
|
|
Weight, sprayer only | 13.3 lb (6.0 kg) | 23.3 lb (10.6 kg) |
|
|
|
Weight, sprayer, hose & gun | 16.5 lb (7.5 kg) | 26.5 lb (12.0 kg) |
|
|
|
Dimensions (Upright): |
|
|
|
|
|
Length | 14.5 in. (36.8 cm) | 19.3 in. (49.0 cm) |
|
|
|
Width | 12.4 in. (31.5 cm) | 15.3 in. (38.9 cm) |
|
|
|
Height | 17.9 in. (45.5 cm) | 37.0 in. (94.0 cm) |
|
|
|
Dimensions (Folded): |
|
|
|
|
|
Length | N/A | 19.3 in. (49.0 cm) |
|
|
|
Width | N/A | 15.3 in. (38.9 cm) |
|
|
|
Height | N/A | 29.2 in. (74.2 cm) |
|
|
|
Power cord | 18 AWG, | |
|
| |
Fluid inlet fitting | 3/4 in. internal thread (standard garden hose thread) | |
|
| |
Fluid outlet fitting | 1/4 NPSM external thread | |
|
| |
Inlet screen (on suction tube) | 35 mesh (450 micron) | |
|
| |
Wetted parts, pump & hose | stainless steel, brass, leather, | |
| (UHMWPE), carbide, nylon, aluminum, PVC, polypropylene, fluroelastomer | |
|
| |
Wetted parts, gun | aluminum, brass, carbide, nylon, plated steel, stainless steel, UHMWPE, zinc | |
|
| |
Generator requirement | 1500 Watt minimum | |
|
| |
Electrical power requirement | 120 Vac, 60 Hz, 15A, 1 phase | |
|
| |
Storage temperature range ◆❖ | ||
|
| |
Operating temperature range ✔ | 40° to 115°F (4° to 46°C) | |
|
|
|
◆When pump is stored with
pump.
❖Damage to plastic parts may result if impact occurs in low temperature conditions.
✔Changes in paint viscosity at very low or very high temperatures can affect sprayer performance.
30 | 312001R |