Graco 311360C Fire and Explosion Hazard, Skin Injection Hazard, Electric Shock Hazard

Page 2

Warnings

Warnings

The following are general warnings related to the setup, use, grounding, maintenance and repair of this equipment. Additional, more specific warnings may be found throughout the body of this manual where applicable. Symbols appearing in the body of the manual refer to these general warnings. When these symbols appear throughout the manual, refer back to these pages for a description of the specific hazard.

WARNING

FIRE AND EXPLOSION HAZARD

Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent fire and explosion:

Use equipment only in well ventilated area.

Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic drop cloths (potential static arc).

When flammable liquid is used in or near sprayer or for flushing or cleaning, keep sprayer at least 20 feet (6 m) away from explosive vapors.

Keep work area free of debris, including solvent, rags and gasoline.

Do not plug or unplug power cords or turn lights on or off when flammable fumes are present.

Ground equipment and conductive objects in work area. See Grounding instructions, 309941.

Use only conductive hoses.

Hold gun firmly to side of grounded pail when triggering into pail.

If there is static sparking or you feel a shock, stop operation immediately. Do not use equipment until you identify and correct the problem.

Keep a fire extinguisher in the work area.

SKIN INJECTION HAZARD

High-pressure fluid from gun, hose leaks, or ruptured components will pierce skin. This may look like just a cut, but it is a serious injury that can result in amputation. Get immediate surgical attention.

Do not point gun at anyone or at any part of the body.

Do not put your hand over the spray tip.

Do not stop or deflect leaks with your hand, body, glove, or rag.

Do not spray without tip guard and trigger guard installed.

Engage trigger lock when not spraying.

Follow Pressure Relief Procedure in this manual, when you stop spraying and before cleaning, checking, or servicing equipment.

ELECTRIC SHOCK HAZARD

Improper grounding, setup, or usage of the system can cause electric shock.

Turn off and disconnect power cord before servicing equipment.

Use only grounded electrical outlets.

Use only 3-wire extension cords.

Ensure ground prongs are intact on sprayer and extension cords.

Do not expose to rain. Store indoors.

PRESSURIZED ALUMINUM PARTS HAZARD

Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents in pressurized aluminum equipment. Such use can cause serious chemical reaction and equipment rupture, and result in death, serious injury, and property damage.

2

311360C

Image 2
Contents 311360C Operation / Fonctionnement / FuncionamientoElectric Shock Hazard Fire and Explosion HazardSkin Injection Hazard Pressurized Aluminum Parts HazardMoving Parts Hazard Equipment Misuse HazardPersonal Protective Equipment Mise en garde Risques DUS AUX Pièces EN Aluminium Sous Pression Equipement DE Protection DU PersonnelPeligro DE Inyección a Través DE LA Piel Peligro DE Incendios Y ExplosionesPeligro DE Descarga Eléctrica Peligro DE Vapores O Líquidos Tóxicos Peligros Debidos a LA Utilización Incorrecta DEL EquipoPeligro DE Piezas DE Aluminio a Presión Equipo DE Protección PersonalEnglish Français Español Premium Digital Display Grounding / Mise à la terre / Conexión a tierra Power Requirements Extension Cords Pails Pressure Relief Procedure / Décompression / Descompresión Setup / Installation / Puesta en marcha Approximate Fill Level Almacenamiento Startup / Démarrage / Puesta en marcha 15secLeaks, proceed to ON. Assemble tip and guard Ti2710a Ti2708a Ti2709a Spray Clear Clog Pump stops automatically when material pail is empty Operation Main Menu Change Display Units Operation Main Menu Descompresión, si no Dernier Code Cleanup / Nettoyage / Limpieza WasteArret Pistolet avec un chiffon imbibé d’eau ou Technical Data XXX, aCaractéristiques techniques Características técnicas 311360C Warranty / Garantie / Garantía Pour LES Clients DE Graco Parlant Francais