Graco 311360C Equipment Misuse Hazard, Personal Protective Equipment, Moving Parts Hazard

Page 3

Warning

WARNING

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

Do not exceed the maximum working pressure or temperature rating of the lowest rated system component. Read Technical Data in all equipment manuals.

Use fluids and solvents that are compatible with equipment wetted parts. Read Technical Data in all equipment manuals. Read fluid and solvent manufacturer’s warnings. For complete information about your material, request MSDS from distributor or retailer.

Check equipment daily. Repair or replace worn or damaged parts immediately with genuine Graco replacement parts only.

Do not alter or modify equipment.

Use equipment only for its intended purpose. Call your Graco distributor for information.

Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.

Do not kink or overbend hoses or use hoses to pull equipment.

Keep children and animals away from work area.

Comply with all applicable safety regulations.

Do not operate the unit when fatigued or under the influence of drugs or alcohol.

PERSONAL PROTECTIVE EQUIPMENT

You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect you from serious injury, including eye injury, inhalation of toxic fumes, burns, and hearing loss. This equipment includes but is not limited to:

Protective eye wear

Clothing and respirator as recommended by the fluid and solvent manufacturer

Gloves

Hearing protection

MOVING PARTS HAZARD

Moving parts can pinch or amputate fingers and other body parts.

Keep clear of moving parts.

Do not operate equipment with protective guards or covers removed.

Pressurized equipment can start without warning. Before checking, moving, or servicing equipment, follow the Pressure Relief Procedure in this manual. Disconnect power or air supply.

311360C

3

Image 3
Contents Operation / Fonctionnement / Funcionamiento 311360CPressurized Aluminum Parts Hazard Fire and Explosion HazardSkin Injection Hazard Electric Shock HazardEquipment Misuse Hazard Personal Protective EquipmentMoving Parts Hazard Mise en garde Equipement DE Protection DU Personnel Risques DUS AUX Pièces EN Aluminium Sous PressionPeligro DE Incendios Y Explosiones Peligro DE Descarga EléctricaPeligro DE Inyección a Través DE LA Piel Equipo DE Protección Personal Peligros Debidos a LA Utilización Incorrecta DEL EquipoPeligro DE Piezas DE Aluminio a Presión Peligro DE Vapores O Líquidos TóxicosEnglish Français Español Premium Digital Display Grounding / Mise à la terre / Conexión a tierra Power Requirements Extension Cords Pails Pressure Relief Procedure / Décompression / Descompresión Setup / Installation / Puesta en marcha Approximate Fill Level Almacenamiento 15sec Startup / Démarrage / Puesta en marchaLeaks, proceed to ON. Assemble tip and guard Ti2710a Ti2708a Ti2709a Spray Clear Clog Pump stops automatically when material pail is empty Operation Main Menu Change Display Units Operation Main Menu Descompresión, si no Dernier Code Waste Cleanup / Nettoyage / LimpiezaArret Pistolet avec un chiffon imbibé d’eau ou XXX, a Technical DataCaractéristiques techniques Características técnicas 311360C Pour LES Clients DE Graco Parlant Francais Warranty / Garantie / Garantía