Graco 258859, 258865 important safety instructions ProShot Cordless Paint Sprayer

Page 1

Operation

ProShotCordless Paint Sprayer

U.S. Patent No. D625,775 S; U.S. Patent No. 6,619,569; U.S. Patent No. D630,708 S; Community Registration #001228255; India Patent No. 230058; Taiwan Patent No. D142952 China Patent No. ZL201030238948.3; and other patents pending

3A0153E

EN

-For portable spray applications of water-based and oil-based (mineral spirit-type) architectural paints and coatings only -

-Not for use in explosive atmospheres -

IMPORTANT SAFETY INSTRUCTIONS

Read all warnings and instructions in this manual. Save these instructions.

Model 258865

Maximum Working Pressure 2000 psi (137 bar, 13.7 MPa)

Model 258859

Maximum Working Pressure 2000 psi (137 bar, 13.7 MPa)

ti14773a

WARNING

Use only water-based or oil-based (mineral spirit-type) materials with flash point greater than 100° F (38° C). Do not use materials which state “FLAMMABLE” on the packaging. For more information about your material, request MSDS from distributor or retailer.

Use oil-based material outdoors or in a well-ventilated indoor area with a flow of fresh air.

Spraying certain materials may cause static build-up in the sprayer that can result in static shock to the user. If this occurs, first ensure the material has a flash point greater than 100° F (38° C) and does not state that it is FLAMMABLE anywhere on the package. If still feeling a static shock, the material likely con- tains a non-mineral spirits fluid such as, but not limited to, xylene, toluene, or naphtha, which can build up static. Switch to an alternative material.

Image 1
Contents ProShot Cordless Paint Sprayer Table of Contents Fire and Explosion Hazard Battery Hazard Fb Fa Component IdentificationTrigger Lock Pressure Relief ProcedurePrime/Relief Valve Position Trigger Locked Trigger Unlocked Red ring is visibleCharger Status Indicator Lights Charging the BatterySprayer Status Indicator Suction Tube Selection SetupStandard Suction Tube sprays ceilings and walls Installation Sprayer SetupCleanup/Storage Spraying Stains or Clear Coats Fine-Finish OptimizerStarting a New Job or Refilling the Cup MaterialsPriming Method page 18 and/or Inlet Valve Triggering Sprayer Reversible Tip Selection ChartAiming Sprayer Unclogging Spray Tip/Guard Assembly Flushing Sprayer Shutdown and CleaningKeep spray area well-ventilated. Keep a good supply Ti15425a Ti15491a Storage Cleaning Sprayer ExteriorTips Part Description Replacement Parts and KitsProShot Repair Kit InstallationOutlet Valve Fitting RemovalAlternate Priming Method Inlet Valve Cleaning Problem Cause Solution TroubleshootingSee Unclogging Tip/Guard Assembly, Spray Pattern Diagnostics Problem Cause SolutionReplace tip. See Install Tip/Guard Assembly Spray pattern spits at 258865 258859 Technical DataGraco Information Graco Standard Warranty