Table of Contents
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Component Identification . . . . . . . . . . . . . . . . . . . . . . . . . 5
Common Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Pressure Relief Procedure . . . . . . . . . . . . . . . . . . . . . . 6
Trigger Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Spray Tip Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Prime/Relief Valve Position . . . . . . . . . . . . . . . . . . . . . 6
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Charger Status Indicator Lights . . . . . . . . . . . . . . . . . . 7 Sprayer Status Indicator . . . . . . . . . . . . . . . . . . . . . . . . 7
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Suction Tube Selection . . . . . . . . . . . . . . . . . . . . . . . . . 8 Spraying Stains or Clear Coats
Install Tip/Guard Assembly
(if not installed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Table of Contents
Getting Started with Basic Techniques . . . . . . . . . . . . . 11
Triggering Sprayer . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Aiming Sprayer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Unclogging Spray Tip/Guard Assembly . . . . . . . . . . . . 12 Shutdown and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . 13
Flushing Sprayer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Cleaning Sprayer Exterior . . . . . . . . . . . . . . . . . . . . . 15
Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Replacement Parts and Kits . . . . . . . . . . . . . . . . . . . . . . 16
ProShot Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Outlet Valve Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Alternate Priming Method . . . . . . . . . . . . . . . . . . . . . . . . 18
Inlet Valve Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Graco Standard Warranty . . . . . . . . . . . . . . . . . . . . . . . . 24
Important User Information
Read this before using your sprayer. See the Operation Manual provided with your sprayer for complete instructions on proper use and safety warnings.
DO NOT RETURN THIS SPRAYER TO THE STORE!
If you experience problems, contact Graco Customer Service at www.graco.com.
Congratulations! You have purchased a
Before using this equipment, be sure to read and follow the information on your container label and ask for a Material Safety Data Sheet (MSDS). The container label and MSDS will explain the contents of the material and the specific precautions related to it.
Paints, coatings and
FLAMMABLE: This type of material contains flammable solvents such as xylene, toluene, naphtha, MEK, lacquer thinner, acetone, denatured alcohol, and turpentine. The container label should indicate that this material is FLAMMABLE. This type of material is NOT compatible with your sprayer and CANNOT be used.
2 | 3A0153E |