Graco Inc TI14427A, 313869B, TI14428A mm M8 x 1.25 T 35 in .9 mm deep 24.1 mm Slot

Page 31

Mounting Hole Layouts

Guns without Manifold

1.76 in.

(44.7 mm)

M8 x 1.25 T

0.35 in. (8.9 mm) deep

0.95 in.

(24.1 mm)

0.13 slot

(3.3 mm)

ti14701a

FIG. 23

313869B

31

Image 31

Contents AirPro EFX Automatic Spray Gun Important Safety InstructionsModels ContentsFire and Explosion Hazard Equipment Misuse Hazard Toxic Fluid or Fumes Hazard Gun Selection Selection ChartsProper Needle/Nozzle Selection Models Without Manifolds Models With ManifoldsAir Caps Needle Assembly IdentificationSample Pattern Sizes and Shapes 313869B Guns with Manifold InstallationVentilate Spray Booth Configure Gun and ManifoldGuns without Manifold Ground SystemReciprocating Arm Rod Mount Mount GunStationary Support Connect Air Line SetupAir regulator With Manifold Connect Fluid HoseWithout Manifold Vertical Pattern Horizontal Pattern Flush Spray Gun Adjust Spray PatternPerform Pressure Relief Procedure, Position Air CapFluid Pressure Regulator Suggested Starting Settings Spray Fan Air Atomizing AirIncorrect Pressure Relief ProcedureOperation Apply FluidDaily Gun Care Clean and Flush Gun General System MaintenanceFollow the Pressure Relief Procedure, 313869B Wrong TroubleshootingProblem Cause Solution Disassembly ServiceReassembly Guns with Manifold PartsGuns without Manifold Additional Parts for Models with Manifold Parts in CommonRepair Kits AccessoriesDimensions Mounting Hole Layouts 44.7 mm M8 x 1.25 T 35 in .9 mm deep 24.1 mm Slot Triggering Speed Technical DataAir Brush Sound DataConventional HiTEchAir Flow Spray Pattern Test Report Spray Pattern Test ReportGraco Information Graco Standard Warranty