Graco Inc TI14428A Air Caps, Sample Pattern Sizes and Shapes, Needle Assembly Identification

Selection Charts

Air Caps

		Nozzle Orifice		Recommended
				Gun/Manifold
Air Cap				Inlet Pressure
Part No.	Type	in.	mm.	psi (MPa, bar)	Air Cap Color
24C182	Conventional	0.028-0.059	0.7-1.5	43 (0.3, 3.0)	Blue-Grey
24C183	HVLP	0.020-0.051	0.5-1.3	15 (0.1, 1.0)*	Pewter
24D703	HiTEch	0.028-0.039	0.7-1.0	29 (0.2, 2.0)	Black
24D704	HiTEch	0.059	1.5	29 (0.2, 2.0)	Black
24C184	LVMP	0.020-0.059	0.5-1.5	43 (0.3, 3.0)	Brown
24D705	Air Brush	0.028	0.7	29 (0.2, 2.0)	Clear

*Maximum compliant HVLP inlet pressure.

Sample Pattern Sizes and Shapes

			Recommended
		Nozzle	Gun/Manifold	Fluid* Flow	Spray
Air Cap		Orifice	Inlet Pressure	Rate	Distance	Pattern	Pattern Size*
Part No.	Type	in. (mm)	psi (MPa, bar)	oz/min (cc/min)	in (cm)	Shape	in. (mm)
24C182	Conventional	0.028 (0.7)	43 (0.3, 3.0)	2.7 (80)	6 (15)	Taper	1.0-6.0 (25-152)
24C183	HVLP	0.028 (0.7)	15 (0.1, 1.0)	2.7 (80)	6 (15)	Straight	1.0-6.5 (25-165)
24D703	HiTEch	0.028 (0.7)	29 (0.2, 2.0)	2.7 (80)	6 (15)	Straight	1.0-6.5 (25-165)
24D704	HiTEch	0.059 (1.5)	29 (0.2, 2.0)	2.7 (80)	6 (15)	Straight	1.0-6.5 (25-165)
24C184	LVMP	0.028 (0.7)	43 (0.3, 3.0)	2.7 (80)	6 (15)	Straight	1.0-6.5 (25-165)
					2 (5)		0.5 (13)
24D705	Air Brush	0.028 (0.7)	29 (0.2, 2.0)	1.0 (30)	4 (10)	Round	0.6 (15)
					6 (15)		0.7 (19)

* Fluid viscosity for these samples was 30 centipoise.

Needle Assembly Identification

Part	Needle Assembly Size	# of Grooves
24C190	0.5 mm	1
24C191	0.7 mm	2
24C192	0.9 mm	3
24C193	1.1 mm	4
24C194	1.3 mm	5

Grooves

ti14043a

8 313869B