GE GE752 manual Coiled Frame Assembly 41D735440, CHG. A. E±38056B

GEK±91584D, Vertical Drilling Motor, Type GE752

TORQUE TABLE

PART	SIZE	TORQUE LBS.±FT.
4	1.25±12	435±483
6	1.25±7	900±995
21	.875±9	240±260
23	.4375±14	25±35
28	.25±20	6±8

MODELS

SEE TABLE 2, PAGE 20

NOTE FOR PARTS 37,38,39:

INSULATE EXCITING AND COMMUTATING FIELD COIL TERMINALS BY FILLING ALL CAVITIES

AND COVERING ALL BOLT HEADS WITH P37 THEN INSULATE ENTIRE TERMINAL ASSEMBLY

WITH 1T±1/2 L. OF P38 AND 1T±1/2 L. OF P39.

NOTE FOR P40:

ASSEMBLE P40 FLUSH TO TOP OF INSIDE WALL OF MAGNET FRAME WITHIN .25 AND TIGHTEN UNTIL PLUG P40 IS EXPANDED AND TIGHT IN HOLE (1±PLACE SEE ENLARGED VIEW @ ºAº).

V.P.I. COILED FRAME, ONE COAT STATIONARY BAKE, FOLLOWED BY ONE SPRAY COAT ON

THE COMM. CHAMBER.

FIG. 31. COILED FRAME ASSEMBLY (41D735440, CHG. A). E±38056B

50