Drawbar Cap: Covers the drawbar and upper portion of the spindle.
Drawbar: Secures collets and tooling in the spindle taper.
Spindle and Chuck: Provide a mounting place for tooling.
Quill Lock Lever: Locks the vertical position of the quill when tightened.
Drawbar Cap |
& Drawbar |
Quill Lock |
Lever |
Spindle & |
Chuck |
Figure 18. Headstock controls (continued).
Cross Handwheel: Moves the table forward and backward (Y-Axis).
Longitudinal Handwheels: Move the table from side to side (X-Axis).
Longitudinal Table Locks: Lock the longitudinal position of the table when tightened.
Cross Table Locks: Lock the cross position of the table when tightened.
Longitudinal | Longitudinal |
Table Locks | Handwheels |
Cross Handwheel | Cross Table Locks |
Figure 19. Table controls.
Model G0704 (Mfg. since 09/09)
Spindle RPM Readout: Displays the speed of the spindle rotation.
Emergency STOP Button: Interrupts the flow of power to the machine.
Variable Spindle Speed Knob: Changes the speed of the spindle rotation.
Spindle Direction Selection Knob: Changes the direction of spindle rotation.
Spindle RPM Readout
Emergency
STOP Button
Variable Spindle
Speed Knob
Spindle Direction
Selection Knob
Figure 20. Control panel.
OFF Button: Turns OFF the display.
ON/0 Button: Turns ON the display with the first press. Pressed again resets the display to 0.000".
IN/MM Button: Toggles the units displayed.
Button: Increases the current depth reading.
Button: Decreases the current depth reading.
OFF Button |
ON/0 Button |
IN/MM Button |
Button |
Button |