Chicago Pneumatic CPVS 75, CPVS 60, CPVS 40, CPVS 50 Definition of the pictograms, Electronic board

Page 7

D - Definition of the pictograms

Typical examples of pictograms valid for CP Compressors:

1.Water outlet

2.Manual condensation water draining

3.Water inlet

4.Automatic condensation water draining

5.Unplug and decompress the compressor before maintenance

6.Hot parts

DANGER

This symbol identifies immediate hazards which will result in severe personal injury, death or substantial property damage.

CAUTION

Identifies hazards or unsafe practies which could result in minor personal injury or property damage.

DANGER

This symbol identifies life threatening electrical voltage levels which will result in severe personal injury or death. All electrical work must be performed by a qualified electrician.

CAUTION

This symbol identifies hot surfaces which coold result in personal injury or property damage.

E - Electronic board

See the specific instructions for a description of the electronic plate, together with operating instructions :

Notice N° 62 305 169 xx for version CPVS

Chicago Pneumatic Compressors	01/2008
62 305 258 65	Page 7

Image 7

Contents Cpvs Model Cpvs 40 50 60NPT Mini + 36 F frost free Maxi + 104 FCpvs Model PSIAWG Main Voltage 460 Volt / 3 / 60 HzConnection of the electric plate to an external control box Contents AIR Delivery Power SupplyStandard equipment DescriptionGeneral Information Respect of the environment and prevention of pollutionElectronic board Definition of the pictogramsInstallation Electric cabling Safety RegulationsVoltage Preparation for start-up Discharge pressure adjustmentParallel compressor assembly SafetyAir circuits see Fig OperationAir and oil circuits Key figLevel detection bleed valve Fig OptionsAdvanced filtration to the compression air inlet a and 7b Support grid Pre-filtration panelsFilter Medium Remote starting and stopping Rotation direction indicator Phase controllerFeatures Automatic restartingDescription of the option Centrifugal separator See B SectionDescription cf Section InstallationSafety instructions Safety RulesControl of rotation direction on start up Setting of pressure machineCommissioning Preparation for start-up See SectionPressure regulation for low rates of flow Energy saving Principle of the pressure regulation by variable speedMain incidents Operating incidentsOperations to be carried out Parts MaintenanceObservations Oillevel Oil level and change see figAir filter TurbineOil return pipe see fig Temperature safety testsOil and air cooler Oil separator see B SectionSee -E Main incidentsSupport@CPcompressor.com