Bosch Power Tools 11250VSRD manual Adjusting the Telescopic Guide To the BIT Length, Guide Housing

BM 1619P02168 12-07 12/5/07 3:52 PM Page 10

been released. (When drilling, the telescopic guide will compress until it engages the depth stop button.)

ADJUSTING THE TELESCOPIC GUIDE

TO THE BIT LENGTH

For more convenient operation when using short drill bits, the length of the telescopic guide can be adjusted to desired lengths.

FIG. 9

GUIDE

X HOUSING

DEPTH STOP	TELESCOPIC
BUTTON	GUIDE

To adjust length, push and hold the guide adjustment button, compress the telescopic guide until dust cap is close to the tip of the drill bit (Fig. 10). To lock adjustment, release button.

To unlock adjustment, push the guide adjustment button.

DUST	DUST	FIG. 10
CAP	SEAL

GUIDE

ADJUSTMENT

BUTTON

DUST CAP FOR SMALL DRILL BITS

Your tool is equipped with a standard dust cap FIG. 11 for use with with small drill bits. To change the

dust cap, push the release button and pull the dust cap out of the dust extraction system.

To insert the dust cap, push it into the end of the dust extraction system until you hear it lock into place (Fig. 11).

DUST CAP

FOR SMALL BITS

DUST CAP

RELEASE BUTTON

DUST CAP FOR CORE BITS

1-1/2" MAXIMUM CAPACITY (Not included, available as accessory)

When using core bits, the dust cap for small drill bits must be removed and replaced with a

special dust cap for core bits (optional accessory).

When using the dust cap for core bits (optional accessory), the vacuum adapter dust canister

-10-