Bosch Power Tools 11250VSRD manual Dust Extraction

Page 8

BM 1619P02168 12-07 12/5/07 3:52 PM Page 8

Dust Extraction

!WARNING Do not drill into metal with the dust extraction system

mounted. Hot metal chips can self-ignite or ignite parts of the dust extraction system.

! CAUTION

Do not drill into wood with

 

dust extraction system

 

mounted. Wood chips are typically too large and will clog the dust channel.

!WARNING Your tool is equipped with a dust canister, empty it

frequently, after completion of drilling and before storing the tool. Be extremely careful of dust disposal, materials in fine particle form may be explosive.

Note: Do not use the dust extraction system when chiselling, screwdriving or cutting threads.

The dust extraction system retracts during operation so that the dust cap is always kept close to surface being drilled.

The dust extraction system automatically switches on and off with the power tool.

For maximum dust extraction efficiency, please observe the following.

The drill bit being used may not project beyond the dust cap as shown in figures 13 & 14. (Example for an SDS-plus drill bit: Max. total length approx. 160 mm, working length approx. 100 mm).

Pay attention that the dust cap faces flush against the workpiece or the wall. At the same time, this makes working at a right angle easier.

After reaching desired drilling depth, first pull the drill bit out of the hole and then switch the tool off.

Check the condition of the microfilter regularly. Replace a damaged microfilter immediately.

REMOVING AND INSTALLING DUST

EXTRACTION SYSTEM

To remove dust extraction system, press and hold the dust extraction release button and pull away from tool housing (Fig. 5).

To install dust extraction system, align guide grooves with the grooves in tool housing and push toward tool until you hear it lock into place (Fig. 5).

MICROFILTER DUST CANISTER The integral dust extraction system collects dust in a canister supplied with your extraction system.

FIG. 5

GUIDE

GROOVES

 

 

 

 

 

rer

 

 

 

 

me

 

 

 

mm

 

 

 

hama

 

 

 

chh

 

 

 

ssc

 

 

 

 

Bo

 

 

 

 

 

TOOL

HOUSING

The dust level of the dust canister can easily be checked through the transparent door (Fig. 6).

For maximum efficiency, the dust canister should be emptied frequently during operation.

REMOVING DUST CANISTER

To remove dust canister, press the two canister release buttons and pull canister downward out of the dust extraction system (Fig. 6).

CLEANING AND EMPTYING THE

DUST CANISTER

Before opening the dust canister, gently strike or tap it against a firm surface to loosen the dust from the microfilter.

Open the transparent door and empty the dust canister. Close transparent door.

Check the microfilter for damage. Replace it immediately when damaged.

DUST EXTRACTION

DUST EXTRACTION

SYSTEM

RELEASE BUTTON

FIG. 6

CANISTER

RELEASE BUTTON

TRANSPARENT

DUST DOOR CANISTER

-8-

Image 8
Contents Read Before Using General Safety Rules Work area safetyElectrical safety Personal safetyService Rotary Hammer Safety RulesPower tool use and care Could cause injury Symbols Functional Description and Specifications Rotary HammerSelection Dial Locking Sleeve Dust ShieldAssembly Removing SDS-plusACCESSORIESLocking Sleeve Offset Auxiliary Handle Hand GripDust Extraction Installing Dust Canister Changing the MicrofilterMicrofilter Dust Canister PortAdjusting the Telescopic Guide To the BIT Length Guide HousingSeal Guide Adjustment Button Dust CAP for Small Drill Bits Dust CAP For Small BitsVariable Speed Controlled Trigger Switch Reversing Switch LeverReversing Switch Lever Slip Clutch Operating InstructionsDRILL/HAMMER Drill Selection Dial Recall these instructions for safe operationDrilling Wood or Plastic Drilling MetalExtension Cords MaintenanceCleaning Accessories Consignes générales de sécurité Sécurité du lieu de travailSécurité électrique Sécurité personnelleEntretien Règles de sécurité concernant les marteaux rotatifsUtilisation et entretien des outils Électroportatifs Poussières pour les applications produisant de la poussière Que ponçage, sciageSymboles Ni-CadDescription fonctionnelle et spécifications Marteau rotatifDémontage D’ACCESSOIRES SDS-PLUS AssemblagePare Poussière Manchon DE Verrouillage Poignée Auxiliaire DéportéeExtraction de la poussière Retrait DU Réservoir À PoussièreRainures DU Guide Boîtier DE Loutil Bouton DE Retrait DU RéservoirRemplacement DU Microfiltre Jauge DE ProfondeurLA Longueur DE Mèche Désirée PARE-POUSSIÈRE Pour LES Mèches EmporteReversing Switch Lever Embrayage À Glissement Consignes de fonctionnementRéservoir À Poussière Loquet DE Compatible Avec UN Levier DE L’INTERRUPTEUR ’INVERSION DE MarcheConseils pratiques Cadran DE Sélection DE PERCEUSE/PERCEUSE À PercussionPour votre sécurité, souvenez-vous Perçage Dans LE Bois OU LE PlastiqueNettoyage EntretienCordons de rallonge Accessoires Normas generales de seguridad Seguridad del área de trabajoSeguridad eléctrica Seguridad personalServicio de ajustes y reparaciones Normas de seguridad para martillos giratoriosMecánicas BM 1619P02168 12-07 12/5/07 352 PM Símbolos De Ni-CdDescripción funcional y especificaciones Martillo giratorioManguito DE Fijación Protector Antipolvo Capacidad máximaEnsamblaje Remoción DE Accesorios SDS-PLUSManguito DE Fijación EmpuñaduraExtracción de polvo Remoción DEL Recipiente Para PolvoCalibre DE Profundidad Cambio DEL MicrofiltroMicrofiltro Recipiente Para Polvo Recipiente Para Polvo CON Ajuste DE LA Guía Telescópica a LA Longitud DE LA Broca Antipolvo Carcasa DE LA GuíaInstrucciones de funcionamiento ControladaPalanca DEL Interruptor DE Inversión Palanca DEL Interruptor DE Inversión Embrague DeslizanteConsejos para la herramienta Dial DE Seleccion DE TALADRO/TALADRO DE PercusionConsejos Para LA Herramienta Taladrado DE Madera O PlasticoMantenimiento Cordones de extensiónServicio LimpiezaAccesorios BM 1619P02168 12-07 12/5/07 352 PM Remarques Notas Limited Warranty of Bosch Portable and Benchtop Power Tools
Related manuals
Manual 32 pages 37.32 Kb

11250VSRD specifications

Bosch Power Tools has long been a trusted name in the power tool industry, offering high-quality products designed for both professional and DIY users. Among their impressive lineup, the Bosch 11250VSR and 11250VSRD rotary hammers stand out due to their versatility, performance, and innovative features tailored to meet a broad range of drilling and demolition needs.

The Bosch 11250VSR is a robust rotary hammer drill that provides powerful performance with a 7.5-amp motor, delivering an impressive 0-1,300 RPM and 0-4,800 BPM. This model is known for its ability to drill through concrete, masonry, and other tough materials with ease, making it an excellent choice for construction professionals and home improvement enthusiasts alike. The dual-mode capability allows users to switch between rotary hammer mode for chiseling and hammer-only mode for light demolition work or chasing pipes.

Complementing the 11250VSR, the model 11250VSRD offers similar power and features, with added benefits like a variable speed trigger for enhanced control during delicate applications. Both models come equipped with Bosch’s SDS-plus chuck system, which enables quick and easy bit changes without the need for additional tools. This feature is especially useful for users who need to switch between different drilling tasks rapidly.

In terms of technologies, Bosch integrates advanced vibration control into both models, significantly reducing user fatigue during extended periods of operation. This technology is crucial for professionals who require hours of drilling without compromising comfort or precision. The ergonomic design of these rotary hammers, complete with soft-grip handles, further enhances user comfort, ensuring that the tool can be operated effectively over long durations.

Additionally, the Bosch 11250VSR and 11250VSRD are designed with durability in mind. Metal gear housings and high-quality components ensure that these tools can withstand the rigors of any job site. The built-in clutch also provides added protection by reducing the risk of tool damage during stalls or bind-ups.

Overall, the Bosch 11250VSR and 11250VSRD rotary hammers exemplify Bosch's commitment to innovation, quality, and user-focused design. With their powerful motors, versatile functionalities, and advanced technologies, these tools are ideal for anyone looking to tackle demanding drilling and chipping tasks with efficiency and ease. Whether you're a professional contractor or a DIY enthusiast, investing in a Bosch rotary hammer can significantly enhance your productivity and overall project results.