Bostitch F21PL2, F28WW Tool Operation Check, Sequential Trip Operation, Contacttrip Operation

Page 12

TOOL OPERATION CHECK:

CAUTION: Remove all fasteners from tool before performing tool operation check.

1.SEQUENTIAL TRIP OPERATION:

A.Press the contact trip against the work surface, without touching the trigger.

THE TOOL MUST NOT CYCLE.

B.Hold the tool off the work surface and pull the trigger.

THE TOOL MUST NOT CYCLE.

Release the trigger. The trigger must return to the trigger stop on the frame.

C.Pull the trigger and press the contact trip against the work surface.

THE TOOL MUST NOT CYCLE.

D.With finger off the trigger, press the contact trip against the work surface. Pull the trigger.

THE TOOL MUST CYCLE.

2.CONTACTTRIP OPERATION:

A.With finger off the trigger, press the contact trip against the work surface.

THE TOOL MUST NOT CYCLE.

B.Hold the tool off the work surface, and pull the trigger.

THE TOOL MUST NOT CYCLE.

C.With the tool off the work surface, pull the trigger. Press the contact trip against the work surface.

THE TOOL MUST CYCLE.

D.Without touching the trigger, press the contact trip against the work surface, then pull the trigger.

THE TOOL MUST CYCLE.

IN ADDITION TO THE OTHER WARNINGS CONTAINED IN THIS MANUAL OBSERVE THE FOLLOWING FOR SAFE OPERATION

•Use the BOSTITCH pneumatic tool only for the purpose for which it was designed.

•Never use this tool in a manner that could cause a fastener to be directed toward the user or others in the work area.

•Do not use the tool as a hammer.

•Always carry the tool by the handle. Never carry the tool by the air hose.

•Do not alter or modify this tool from the original design or function without approval from BOSTITCH

•Always be aware that misuse and improper handling of this tool can cause injury to yourself and others.

•Never clamp or tape the trigger or contact trip in an actuated position.

•Never leave a tool unattended with the air hose attached.

•Do not operate this tool if it does not contain a legible WARNING LABEL.

•Do not continue to use a tool that leaks air or does not function properly. Notify your nearest BOSTITCH representative if your tool continues to experience functional problems.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents F33PT / F33PTSM Limited Warranty U.S. and Canada Only IntroductionIndex Safety Instructions AIR Supplyand ConnectionsLoadingtool OperationSeriestool Specifications Fastener SpecificationsTool AIR Fitting Operating PressureOperation LubricationLoadingthe F Series Tools To Prevent Accidental InjuriesFastener Depth Control Adjustment To Adjust the Fastener Depth ControlDirectional Exhaust Deflector Removing NailsPage Tool Operation Before Handling or Operating this ToolSequential Trip Operation Graytrigger Contact Trip Operation Black TriggerTool Operation Sequential Trip Important Read CarefullyTool Operation Check Sequential Trip OperationContacttrip Operation Replacement Parts Assembly Procedure for SealsAIR SUPPLY-PRESSURE and Volume Maintaining the PneumatictoolTrouble Shooting Problem Cause CorrectionIntroducción ÍndiceNota Garantía Limitada Sólo EE.UU. y CanadáInstrucciones DE Seguridad Suministro DE Airey ConexionesAL Cargar LA Herramienta OperaciónMantenimiento DE LA Herramienta Especificaciones DE LA Herramienta Serie FFuncionamiento Funcionamiento continuación LubricaciónCarga DE LAS Herramientas Serie F Para Prevenir Lesiones AccidentalesAjuste DEL Control DE Profundidaddel Clavo Deflector DE Escape DireccionalExtracción DE Clavos Para Ajustar EL Control DE Profundidad DEL ClavoFigura Funcionamiento DE LA Herramienta Antes DE Manipular U Operar Esta HerramientaFuncionamiento DEL Disparo Secuencial Gatillo Gris Funcionamiento DEL Disparo DE Contacto Gatillo NegroFuncionamiento DE LA Herramienta Continuación Disparo Secuencial ¡IMPORTANTE LEA DetenidamenteRevisión Funcional DE LA Herramienta Funcionamiento DEL Disparo SecuencialFuncionamiento DEL Disparo DE Contacto Presión Y Volumen DEL Suministro DE Aire Mantenimiento DE LA Herramienta NeumáticaPiezas DE Repuesto Procedimiento DE Ensamblaje Para LOS SellosSolución DE Problemas Revise el equipo de suministro de aireRemarque Garantie Limitée É.-U. et Canada seulementConsignes DE Sécurité Alimentation EN AIR Comprimé ET RaccordementChargement DE L’APPAREIL FonctionnementEntretien DE L’APPAREIL Spécifications DES AttachesGarniture Pneumatiquede L’OUTIL Pression DE FonctionnementUtilisation suite Alimentation EN AIR ET ConnexionsLubrification Chargement DES Outils DE LA Série F Pour Prévenir Tout AccidentCommandede Réglage DE Profondeurde Fixation Déflecteur DE L’ÉCHAPPEMENT DirectionnelRetrait DES Clous Pour Régler LA Profondeur DE FixationPage Fonctionnement DE L’OUTIL UtilisationDéclenchement Séquentiel Gâchette Grise Utilisation DU Déclencheur PAR Contact Gâchette NoireUtilisation DE L’OUTIL Suite Déclencheur Séquentiel Important À Lire AttentivementVérification DE L’ÉTATDE Marche DE L’OUTIL Utilisation DU Déclencheur SéquentielFonctionnement DE LA Butée DE Déclenchement Maintenance DE L’OUTILPNEUMATIQUE Pression ET Volume DE L’ALIMENTATION D’AIRPièces DE Rechange Procédure DE Montage DES JointsDépannage Attaches coincées dans l’outil
Related manuals
Manual 3 pages 22.58 Kb

F21PL, F33PT, F33PTSM, F21PL2, F28WW specifications

Bostitch is renowned for its high-quality nailers and fasteners, and its range of products including the F28WW, F21PL2, F33PTSM, F33PT, and F21PL showcases innovations in construction and woodworking. Each of these models is designed to cater to specific needs, making them essential tools for professionals and DIY enthusiasts alike.

The Bostitch F28WW is a lightweight framing nailer that is particularly well-suited for wall framing and sheathing applications. It features a unique flush nose design that allows users to navigate tight spaces with ease. Its adjustable depth control ensures precise nail placement, while the tool-free jam clearance saves valuable time in the event of a jam.

Next is the F21PL2, which combines the functions of both a framing nailer and a brad nailer. This versatility is ideal for those handling diverse projects, from framing walls to finishing touches. The F21PL2 is equipped with a Pushbutton Depth Adjustment feature, which allows users to quickly set the nail depth according to materials, ensuring high-quality finishes.

The Bostitch F33PTSM is designed for trim work, offering a precision that makes it a go-to tool for trim carpenters. Its SmartPoint technology provides accurate nail placement and eliminates the need for the user to press the nailer against the workpiece before firing. This feature, coupled with its tool-free depth adjustment, allows for flexibility and precision.

Similarly, the F33PT is well-regarded for its lightweight design and superior maneuverability. It utilizes a Tool-Free Depth Adjustment feature that enables users to quickly adapt the nail depth for better results on different materials. Its durable construction ensures longevity and reliability on the job site.

Rounding out the lineup is the F21PL, which focuses primarily on framing and metal connector applications. This nailer is known for its high-efficiency performance, featuring a patented anti-dry fire mechanism that prevents accidental firing when nails are not loaded. The F21PL is also compatible with a wide range of fasteners, enhancing its adaptability for various tasks.

Together, these Bostitch models exemplify the brand's commitment to quality, efficiency, and user-friendly technologies, making them indispensable for construction professionals and hobbyists looking to achieve high standards in their woodworking projects. Their blend of performance-enhancing features and thoughtful designs truly sets Bostitch nailers apart in the market.
Top Page Image Contents