Bostitch F28WW, F21PL2, F33PTSM manual Loadingthe F Series Tools, To Prevent Accidental Injuries

Page 6

LOADINGTHE F SERIES TOOLS

EYE PROTECTION which conforms to ANSI specifications and provides protection against flying particles both from the FRONT and SIDE should ALWAYS be worn by the operator and others in the work area when connecting to air supply, loading, operating or servicing this tool. Eye protection is required to guard against flying fasteners and debris, which could cause severe eye injury.

The employer and/or user must ensure that proper eye protection is worn. Eye protection equipment must conform to the requirements of the American National Standards Institute, ANSI Z87.1 and provide both frontal and side protection. NOTE: Non-side shielded spectacles and face shields alone do not provide adequate protection.

TO PREVENT ACCIDENTAL INJURIES:

•Never place a hand or any other part of the body in nail discharge area of tool while the air supply is connected.

•Never point the tool at anyone else.

•Never engage in horseplay.

•Never pull the trigger unless nose is directed at the work.

•Always handle the tool with care.

•Do not pull the trigger or depress the trip mechanism while loading the tool.

F21PL, F21PL2, F28WW, F33PT, F33PTSM

1. Open the magazine:

2. Load Nails: Hold nailer down

Pull pusher back to

with magazine tilted downward.

engage the latch.

Insert stick of nails

3.Close Magazine: Release pusher by first pulling back on the pusher and then pressing the pusher release tab. Slide pusher against nails.

NOTE: Use only nails recommended for use in BOSTITCH Framing nailers or nails which meet the BOSTITCH specifications.

When installing metal connectors with the F21PL, F21PL2, F33PT or F33PTSM: use only one stick of metal connector nails at a time.

Never use contact trigger (black trigger) with metal connector attachment. Only use sequential trigger (gray trigger) with metal connector attachment. Refer to trigger conversion instruction included in the kit.

When installing Metal Connectors, use ONLY BOSTITCH Heat Treated Metal

Connector Nails.

Never use rafter hook to hang tool from body, clothing or belt.

GUIDE ROD INSTALLATIONAND REMOVALF21PL, F21PL2, F33PT, F33PTSMTOOLS:

Fig. 1

GUIDE ROD

PULL HERE AND ROTATE

COVER TO OPEN

Fig. 3

Fig. 2

ACCESS WINDOWS FOR INSTALLATION

ANDOVALREMOF GUIDE ROD.

OTAR TE COVER OPEN TO

INSTALL OR REMOVE

GUIDE ROD.

INSTALL OR REMOVE

GUIDE RODRUTH

REAR OF MAGAZINE.

GUIDE ROD

TORAGES CHANNEL

INSTALL GUIDE ROD THRU HERE TOP HOLE

FOR .113" TO .131" SHANK NAILS

ROTATE COVER BACK TO CLOSE.

COVER ROTATED OPEN

INSTALL GUIDE ROD THRU HERE BOTTOM HOLE

FOR STORAGE ALONG OUTSIDE OF MAGAZINE

FOR .131" TO .162" SHANK NAILS

ROTATE COVER BACK TO CLOSE.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents F33PT / F33PTSM Limited Warranty U.S. and Canada Only IntroductionIndex Loadingtool Safety InstructionsAIR Supplyand Connections OperationTool AIR Fitting Seriestool SpecificationsFastener Specifications Operating PressureOperation LubricationLoadingthe F Series Tools To Prevent Accidental InjuriesDirectional Exhaust Deflector Fastener Depth Control AdjustmentTo Adjust the Fastener Depth Control Removing NailsPage Sequential Trip Operation Graytrigger Tool OperationBefore Handling or Operating this Tool Contact Trip Operation Black TriggerTool Operation Sequential Trip Important Read CarefullyTool Operation Check Sequential Trip OperationContacttrip Operation AIR SUPPLY-PRESSURE and Volume Replacement PartsAssembly Procedure for Seals Maintaining the PneumatictoolTrouble Shooting Problem Cause CorrectionNota IntroducciónÍndice Garantía Limitada Sólo EE.UU. y CanadáAL Cargar LA Herramienta Instrucciones DE SeguridadSuministro DE Airey Conexiones OperaciónMantenimiento DE LA Herramienta Especificaciones DE LA Herramienta Serie FFuncionamiento Funcionamiento continuación LubricaciónCarga DE LAS Herramientas Serie F Para Prevenir Lesiones AccidentalesExtracción DE Clavos Ajuste DEL Control DE Profundidaddel ClavoDeflector DE Escape Direccional Para Ajustar EL Control DE Profundidad DEL ClavoFigura Funcionamiento DEL Disparo Secuencial Gatillo Gris Funcionamiento DE LA HerramientaAntes DE Manipular U Operar Esta Herramienta Funcionamiento DEL Disparo DE Contacto Gatillo NegroFuncionamiento DE LA Herramienta Continuación Disparo Secuencial ¡IMPORTANTE LEA DetenidamenteRevisión Funcional DE LA Herramienta Funcionamiento DEL Disparo SecuencialFuncionamiento DEL Disparo DE Contacto Piezas DE Repuesto Presión Y Volumen DEL Suministro DE AireMantenimiento DE LA Herramienta Neumática Procedimiento DE Ensamblaje Para LOS SellosSolución DE Problemas Revise el equipo de suministro de aireRemarque Garantie Limitée É.-U. et Canada seulementChargement DE L’APPAREIL Consignes DE SécuritéAlimentation EN AIR Comprimé ET Raccordement FonctionnementGarniture Pneumatiquede L’OUTIL Entretien DE L’APPAREILSpécifications DES Attaches Pression DE FonctionnementUtilisation suite Alimentation EN AIR ET ConnexionsLubrification Chargement DES Outils DE LA Série F Pour Prévenir Tout AccidentRetrait DES Clous Commandede Réglage DE Profondeurde FixationDéflecteur DE L’ÉCHAPPEMENT Directionnel Pour Régler LA Profondeur DE FixationPage Déclenchement Séquentiel Gâchette Grise Fonctionnement DE L’OUTILUtilisation Utilisation DU Déclencheur PAR Contact Gâchette NoireUtilisation DE L’OUTIL Suite Déclencheur Séquentiel Important À Lire AttentivementVérification DE L’ÉTATDE Marche DE L’OUTIL Utilisation DU Déclencheur SéquentielFonctionnement DE LA Butée DE Déclenchement Pièces DE Rechange Maintenance DE L’OUTILPNEUMATIQUEPression ET Volume DE L’ALIMENTATION D’AIR Procédure DE Montage DES JointsDépannage Attaches coincées dans l’outil
Related manuals
Manual 3 pages 22.58 Kb

F21PL, F33PT, F33PTSM, F21PL2, F28WW specifications

Bostitch is renowned for its high-quality nailers and fasteners, and its range of products including the F28WW, F21PL2, F33PTSM, F33PT, and F21PL showcases innovations in construction and woodworking. Each of these models is designed to cater to specific needs, making them essential tools for professionals and DIY enthusiasts alike.

The Bostitch F28WW is a lightweight framing nailer that is particularly well-suited for wall framing and sheathing applications. It features a unique flush nose design that allows users to navigate tight spaces with ease. Its adjustable depth control ensures precise nail placement, while the tool-free jam clearance saves valuable time in the event of a jam.

Next is the F21PL2, which combines the functions of both a framing nailer and a brad nailer. This versatility is ideal for those handling diverse projects, from framing walls to finishing touches. The F21PL2 is equipped with a Pushbutton Depth Adjustment feature, which allows users to quickly set the nail depth according to materials, ensuring high-quality finishes.

The Bostitch F33PTSM is designed for trim work, offering a precision that makes it a go-to tool for trim carpenters. Its SmartPoint technology provides accurate nail placement and eliminates the need for the user to press the nailer against the workpiece before firing. This feature, coupled with its tool-free depth adjustment, allows for flexibility and precision.

Similarly, the F33PT is well-regarded for its lightweight design and superior maneuverability. It utilizes a Tool-Free Depth Adjustment feature that enables users to quickly adapt the nail depth for better results on different materials. Its durable construction ensures longevity and reliability on the job site.

Rounding out the lineup is the F21PL, which focuses primarily on framing and metal connector applications. This nailer is known for its high-efficiency performance, featuring a patented anti-dry fire mechanism that prevents accidental firing when nails are not loaded. The F21PL is also compatible with a wide range of fasteners, enhancing its adaptability for various tasks.

Together, these Bostitch models exemplify the brand's commitment to quality, efficiency, and user-friendly technologies, making them indispensable for construction professionals and hobbyists looking to achieve high standards in their woodworking projects. Their blend of performance-enhancing features and thoughtful designs truly sets Bostitch nailers apart in the market.
Top Page Image Contents