Bostitch F28WW, F21PL2, F33PTSM manual Sequential Trip, Important Read Carefully

Page 11

OPERATINGYOUR F21PL, F21PL2, F33PT & F33PTSM

TOOL WITH METAL CONNECTOR ATTACHMENT

EYE PROTECTION which conforms to ANSI specifications and provides protection against flying particles both from the FRONT and SIDE should ALWAYS be worn by the operator and others in the work area when connecting to air supply, loading, operating or servicing this tool. Eye protection is required to guard against flying fasteners and debris, which could cause severe eye injury.

The employer and/or user must ensure that proper eye protection is worn. Eye protection equipment must conform to the requirements of the American National Standards Institute, ANSI Z87.1 and provide both frontal and side protection. NOTE: Non-side shielded spectacles and face shields alone do not provide adequate protection.

IMPORTANT - READ CAREFULLY!

You and others working around you can be seriously injured by this tool if you do not follow the instructions provided on the tool and in the operation manual. Used properly, the tool provides an easy, safe, and efficient method for driving nails for all kinds of construction projects.

NOTE: Refer to your Operation Manual or Parts List if any of the terms used below are unfamiliar to you.

- MCN-KIT3 must be purchased separately for the F21PL2 to be used for fastening metal connectors.

SEQUENTIAL TRIP

Never use contact trigger (black trigger) with metal connector attachment. Only use sequential trigger (gray trigger) with metal connector attachment. Refer to trigger conversion instruction included in the kit.

The BOSTITCH F21PL, F33PT & F33PTSM tools with Metal Connector Attachment come with the Sequential Trip (gray trigger) installed. This style of trigger:

1.Offers a positive safety advantage since it will not accidentally drive a nail if the tool is bumped against any surface or anybody while the operator is holding the tool with the trigger pulled.

2.Allows Place Nailing without the possibility of driving a second nail on recoil.

The Sequential Trip (gray trigger) gets its name from the "sequence" required to operate the tool. To drive a nail, the operator must first depress the trip against the work surface and then pull the trigger. To drive a second nail, the operator must lift the tool from the work surface, release the trigger, and then repeat the above sequence.

TO AVOID SERIOUS INJURY FROM FASTENERS AND FLYING DEBRIS WHEN INSTALLING METAL CONNECTORS USING THE F21PL, F21PL2, F33PT & F33PTSM WITH METAL CONNECTOR ATTACHMENT:

•Always use the Metal Connector Attachment. (See installation instructions.)

•Only use sequential trip (gray trigger).

•Use only genuine BOSTITCH metal connector nails.

•Use only one stick of metal connector nails at a time.

•Metal connector nails are not designed to penetrate metal. When installing metal connectors, always place the Metal Connector Attachment Guide in the metal connector’s pre-formed hole before attempting to drive a fastener

When installing Metal Connectors, use ONLY BOSTITCH Heat Treated Metal

Connector Nails

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents F33PT / F33PTSM Index Limited Warranty U.S. and Canada OnlyIntroduction Operation Safety InstructionsAIR Supplyand Connections LoadingtoolOperating Pressure Seriestool SpecificationsFastener Specifications Tool AIR FittingLubrication OperationTo Prevent Accidental Injuries Loadingthe F Series ToolsRemoving Nails Fastener Depth Control AdjustmentTo Adjust the Fastener Depth Control Directional Exhaust DeflectorPage Contact Trip Operation Black Trigger Tool OperationBefore Handling or Operating this Tool Sequential Trip Operation GraytriggerTool Operation Important Read Carefully Sequential TripContacttrip Operation Tool Operation CheckSequential Trip Operation Maintaining the Pneumatictool Replacement PartsAssembly Procedure for Seals AIR SUPPLY-PRESSURE and VolumeProblem Cause Correction Trouble ShootingGarantía Limitada Sólo EE.UU. y Canadá IntroducciónÍndice NotaOperación Instrucciones DE SeguridadSuministro DE Airey Conexiones AL Cargar LA HerramientaFuncionamiento Mantenimiento DE LA HerramientaEspecificaciones DE LA Herramienta Serie F Lubricación Funcionamiento continuaciónPara Prevenir Lesiones Accidentales Carga DE LAS Herramientas Serie FPara Ajustar EL Control DE Profundidad DEL Clavo Ajuste DEL Control DE Profundidaddel ClavoDeflector DE Escape Direccional Extracción DE ClavosFigura Funcionamiento DEL Disparo DE Contacto Gatillo Negro Funcionamiento DE LA HerramientaAntes DE Manipular U Operar Esta Herramienta Funcionamiento DEL Disparo Secuencial Gatillo GrisFuncionamiento DE LA Herramienta Continuación ¡IMPORTANTE LEA Detenidamente Disparo SecuencialFuncionamiento DEL Disparo DE Contacto Revisión Funcional DE LA HerramientaFuncionamiento DEL Disparo Secuencial Procedimiento DE Ensamblaje Para LOS Sellos Presión Y Volumen DEL Suministro DE AireMantenimiento DE LA Herramienta Neumática Piezas DE RepuestoRevise el equipo de suministro de aire Solución DE ProblemasGarantie Limitée É.-U. et Canada seulement RemarqueFonctionnement Consignes DE SécuritéAlimentation EN AIR Comprimé ET Raccordement Chargement DE L’APPAREILPression DE Fonctionnement Entretien DE L’APPAREILSpécifications DES Attaches Garniture Pneumatiquede L’OUTILLubrification Utilisation suiteAlimentation EN AIR ET Connexions Pour Prévenir Tout Accident Chargement DES Outils DE LA Série FPour Régler LA Profondeur DE Fixation Commandede Réglage DE Profondeurde FixationDéflecteur DE L’ÉCHAPPEMENT Directionnel Retrait DES ClousPage Utilisation DU Déclencheur PAR Contact Gâchette Noire Fonctionnement DE L’OUTILUtilisation Déclenchement Séquentiel Gâchette GriseUtilisation DE L’OUTIL Suite Important À Lire Attentivement Déclencheur SéquentielFonctionnement DE LA Butée DE Déclenchement Vérification DE L’ÉTATDE Marche DE L’OUTILUtilisation DU Déclencheur Séquentiel Procédure DE Montage DES Joints Maintenance DE L’OUTILPNEUMATIQUEPression ET Volume DE L’ALIMENTATION D’AIR Pièces DE RechangeAttaches coincées dans l’outil Dépannage
Related manuals
Manual 3 pages 22.58 Kb

F21PL, F33PT, F33PTSM, F21PL2, F28WW specifications

Bostitch is renowned for its high-quality nailers and fasteners, and its range of products including the F28WW, F21PL2, F33PTSM, F33PT, and F21PL showcases innovations in construction and woodworking. Each of these models is designed to cater to specific needs, making them essential tools for professionals and DIY enthusiasts alike.

The Bostitch F28WW is a lightweight framing nailer that is particularly well-suited for wall framing and sheathing applications. It features a unique flush nose design that allows users to navigate tight spaces with ease. Its adjustable depth control ensures precise nail placement, while the tool-free jam clearance saves valuable time in the event of a jam.

Next is the F21PL2, which combines the functions of both a framing nailer and a brad nailer. This versatility is ideal for those handling diverse projects, from framing walls to finishing touches. The F21PL2 is equipped with a Pushbutton Depth Adjustment feature, which allows users to quickly set the nail depth according to materials, ensuring high-quality finishes.

The Bostitch F33PTSM is designed for trim work, offering a precision that makes it a go-to tool for trim carpenters. Its SmartPoint technology provides accurate nail placement and eliminates the need for the user to press the nailer against the workpiece before firing. This feature, coupled with its tool-free depth adjustment, allows for flexibility and precision.

Similarly, the F33PT is well-regarded for its lightweight design and superior maneuverability. It utilizes a Tool-Free Depth Adjustment feature that enables users to quickly adapt the nail depth for better results on different materials. Its durable construction ensures longevity and reliability on the job site.

Rounding out the lineup is the F21PL, which focuses primarily on framing and metal connector applications. This nailer is known for its high-efficiency performance, featuring a patented anti-dry fire mechanism that prevents accidental firing when nails are not loaded. The F21PL is also compatible with a wide range of fasteners, enhancing its adaptability for various tasks.

Together, these Bostitch models exemplify the brand's commitment to quality, efficiency, and user-friendly technologies, making them indispensable for construction professionals and hobbyists looking to achieve high standards in their woodworking projects. Their blend of performance-enhancing features and thoughtful designs truly sets Bostitch nailers apart in the market.
Top Page Image Contents