MAINTENANCE CHECKLIST
Maintenance | Benefit | Procedure | Service Interval |
|
|
|
|
Inspect trigger performance | Ensure trigger system is in | Refer to Tool Operation | Daily |
| proper working order | Check section in this manual |
|
|
|
|
|
Drain condensation from air | Prevents accumlation of | Open drain cock on tanks | Daily |
compressor tanks and air | moisture that can impede tool | and air filters and drain all |
|
filters (if present) | performace | condensate |
|
|
|
|
|
Clean magazine assembly | Prevents accumlation of | Blow clean with compressed air | Daily |
| debris that could cause a jam |
|
|
|
|
|
|
Clean nose assembly | Prevents accumlation of | Blow clean with compressed air | Daily |
| debris that could cause a jam |
|
|
|
|
|
|
Ensure all fasteners remain | Prevent loose parts | Tighten all fasteners with | Weekly |
tight |
| appropriately sized hex |
|
|
| wrench |
|
|
|
|
|
Check/clean air inlet air filter | Maintains proper air flow to | Remove end cap and use | 25,000 Fasteners, or monthly |
| engine for peak performance. | compressed air blow gun to | - if used in dusty location |
|
| blow filter clean. Replace filter |
|
|
| as required. |
|
|
|
|
|
Replace | Prevents marks in softwood | Removeworn | 25,000 Fasteners |
| applications | replace with a newtip (a spare tip |
|
|
| is located on the magazine) |
|
|
|
|
|
Replace swivel air fitting | Maintains proper air flow to | Remove worn swivel air fitting | 50,000 Fasteners |
| engine for peak performance | and replace with new swivel |
|
|
| fitting |
|
|
|
|
|
Replace piston/driver | Maintains consistent drive | Refer to replacement part kit | 150,000 Fasteners |
assembly | quality | instructions |
|
|
|
|
|
Replace | Maintains engine for peak | Refer to replacement part kit | 250,000 Fasteners |
| performance | instructions |
|
|
|
|
|
Replace bumper | Maintains engine for peak | Refer to replacement part kit | 250,000 Fasteners |
| performance | instructions |
|
|
|
|
|
Replace headvalve | Maintains engine for peak | Refer to replacement part kit | 250,000 Fasteners |
| performance | instructions |
|
|
|
|
|
Replace engine cylinder | Maintains engine for peak | Refer to replacement part kit | 500,000 Fasteners |
| performance | instructions |
|
|
|
|
|