TOOL SPECIFICATIONS
All dimensions in inches unless otherwise specified.
| EHF1838K | LHF2025K |
Description | 18ga Flooring Stapler | 20ga Flooring Stapler |
Engine Type | ||
Operation Pressure Range | ||
Maximum Operation Pressure | 120 PSI (8.43 kg/cm2) | 120 PSI (8.43 kg/cm2) |
Fastener Type | SX5035 Series | |
Fastener Gauge | 18 Gauge | 20 Gauge |
Fastener Range | 1” - | 1” (25mm) |
|
|
|
Magazine Capacity | 100 | 125 |
Length | ||
Width | ||
Height | 8.5” (215.9mm) | |
Weight | 3.47lbs. (1.57kg) | 2.9lbs. (1.32kg) |
Operating Pressure:
70 to 120 p.s.i.g. (4.9 to 8.43 kg/cm2). Select the operating pressure within in this range for best fastener performance.
DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.
Air Consumption:
The EHF1838K requires 1.94 cubic feet per minute or C.F.M.(54.93 liters per minute or LT/MIN) of free air at 80PSI (5.6 kg/cm2) to operate at a rate of 60 fasteners per minute. The LHF2025K requires 1.90 cubic feet per minute or C.F.M. (53.8 liters per minute or LT/MIN) of free air at 80PSI (5.6 kg/cm2) to operate at a rate of 60 fasteners per minute. To determine the appropriately sized air compressor, take the actual rate at which the tool will be run and compare the required C.F.M.(LT/MIN) to the compressors free air delivery (C.F.M./ LT/MIN) at 80 PSI (5.6 kg/cm2).
For example, if your fastener usage averages 30 fasteners per minute, you need 50% of the tools C.F.M. required to operate the tool at the rate of 60 fasteners per minute. In this case, be sure that your air compressor can deliver a minimum of 0.97 C.F.M. (27.47 LT/MIN) at 80 PSI (5.6 kg/cm2) for optimum performance.
FASTENER SPECIFICATIONS
Tool Model | Fastener Type | Fastener SKU | Crown Width | Gauge | Length |
|
| SX50351G | 7/32” | 18 | 1” (25mm) |
|
| 7/32” | 18 | ||
EHF1838K |
| 7/32” | 18 | ||
|
|
|
|
| |
| 7/32” | 18 | |||
|
| ||||
| Staples |
|
|
|
|
| 7/32” | 18 | |||
|
| 7/32” | 18 | ||
LHF2025K | Staples | 3/16” | 20 | 1” (25mm) | |
|
|
|
|
|
|
* Stainless steel fasteners also available in certain sizes. Visit www.BOSTITCH.com for further details.
NOTE:
BOSTITCH tools have been engineered to provide superior customer satisfaction and are designed to achieve maximum perfomance when used with precision BOSTITICH fasteners engineered to the same exacting standards. BOSTITCH cannot assume responsibility for product performance if our tools are used with fasteners or accessories not meeting the specific requirements established for genuine BOSTITCH fasteners and accessories.