Harbor Freight Tools 96067 To Mount Collets with the Drawbar, To Move the Carriage

Page 20

TO MOUNT COLLETS WITH THE DRAWBAR

The Drawbar/R-8 Collet combination is used with all of the tools of the Metal/ Woodworking Machine. To attach R-8 Collets, pass the Drawbar through the Spindle from the left. Align the keyway in the exterior of the Collet with the Key in the Spindle and slide the R-8 Collet into the Spindle from the right. Insert the Drawbar into the left end of the Spindle in the place market “Drawbar.” Turn the Drawbar and thread it into the Collet until the Collet is tight in the Spindle. (See page 16.)

TO MOVE THE CARRIAGE

1.The Carriage has three functions:

a.To adjust the height of the saw Table.

b.To support the Tool Rest.

c.To provide left/right and up/down movement for adjustments in horizontal boring and milling projects.

2.The height adjustment is geared for the saw Table’s Way Tubes. Pull up on the Table Lock to tighten it.

3.Before moving the Carriage to the left or right you must release the Carriage Lock with a clockwise turn. Then turn the Carriage Travel Hand Wheel in the opposite way of the direction you want to go.

4.WARNING! Always check all Locks before operating the Metal/Woodworking Machine. Always ensure the Carriage and any installed Table or Lathe Tool Rest are locked down (unless they are being moved). Failure to completely lock the Table, the Carriage, or the Powerhead can result in personal injury and/or damage to the Machine. (See page 16.)

SKU 96067

For technical questions, please call 1-800-444-3353.

Page 20

Image 20

Contents Woodworking Machine Contents GroundingParts Lists and Diagrams Specifications General Safety Rules Personal SafetySave This Manual Work AreaService Tool Use And CareSpecific Safety Rules Mechanical PrecautionsNoise Precaution Table SAW Safety RulesNever attempt to cut more than one workpiece at a time SKU For technical questions, please call Drill Press Safety Rules Never attempt to drill more than one workpiece at a timeLathe Safety Rules ROUTER/SHAPER Safety Rules Always feed the workpiece against the rotation of the CutterHorizontal Boring Safety Rules Disc Sander Safety RulesMISC. Safety Rules Extension Cords See Figure B, nextFeet SymbologyUnpacking Product Features FiguredPower KEY To Move the PowerheadTo Adjust Speed Belts and Pulleys To Move the Quill FeedTo Mount Collets with the Drawbar To Move the CarriageAssembly Instructions To Attach the Shelf to the Stand To Install the CastersSee Figure E and Assy. Diagram, See Figure F, next page and Assy. Diagram,To Mount the Machine Onto the Stand See Figure I, next page and Assy. Diagram, To Attach a SAW Blade to the ArborTo Install the Lower Blade Guard See Figure J and Assy. Diagram,See Figure K and Assy. Diagram, To Assemble the Main TableTo Install the Extension Table See Figure L and Assy. Diagram,To Install the RIP Fence and TOP Guard To Install the Miter GaugeSee Figure M and Assy. Diagram, Assy. Diagram,See Figure P, next To Install the Disc SanderTo SET UP the Vertical Drill Press To SET UP the Horizontal Boring Tool Figure PSee To SET UP the ShaperTo SET UP the Router Installing and Using the Cutter Guard To SET UP the LatheFigure S See Figure T Figure TTo Align the SAW Table to the SAW Blade To Align the SAW Degrees to the SAW BladeTo Align the Extension Degrees to the SAW Blade To Adjust the SAW TABLE’S 45 Degree StopTo Align the Miter Gauge To Align the SAW Degrees to the Powerhead To SET the Carriage Bumper BoltTo Align the Lathe Tailstock with the Powerhead Speed Chart Parts List Cabinet & CastersAssembly Diagram Cabinet & Casters Parts List Main BED Assembly Diagram Main BED Parts List -Head Assy Parts List head assy. Assembly Diagram Head Assy Parts List Carriage Assy Assembly Diagram Carriage Assy Parts List SAW Table Assy Assembly Diagram SAW Table Assy Parts List SAW Guard Assy Assembly Diagram SAW Guard Assy Parts List RIP Fence Assembly Diagram Parts List & ASSY. Diagram Lathe Tailstock Assy Parts List & ASSY. Diagram EXT. Table Assy Parts List & ASSY. Diagram Sanding Disc Assy Parts List & ASSY. Diagram Tool Mounting Assemblies Parts List & ASSY. Diagram Tool Rest Parts List & ASSY. Diagram Miter Gauge Assy Parts List Electrical System Assembly Diagram Electrical System Limited 1 year / 90 Day warranty Please Read the Following Carefully