Harbor Freight Tools 96067 To Assemble the Main Table, See Figure K and Assy. Diagram

Page 25

TO ASSEMBLE THE MAIN TABLE

1.Set the Table upside down with the Trunnion and its degree scale toward you.

(See Figure K and Assy. Diagram, page 46.)

2.Install the second Trunnion Lock and Washers from the provided Accessory Pack.

(See Figure K and Assy. Diagram, page 46.)

3.Loosen the Table Setscrews and insert the Legs into the Saw Table with the rack teeth facing left. (See Figure K and Assy. Diagram, page 46.)

4.Finger-tighten the Setscrews. The Screws will hold the Legs in the casting, but will be loose enough for final adjusting.

(See Figure K and Assy. Diagram, page 46.)

FIGURE K

SKU 96067

For technical questions, please call 1-800-444-3353.

Page 25

Image 25

Contents Woodworking Machine Grounding ContentsParts Lists and Diagrams Specifications Personal Safety General Safety RulesSave This Manual Work AreaTool Use And Care ServiceMechanical Precautions Specific Safety RulesTable SAW Safety Rules Noise PrecautionNever attempt to cut more than one workpiece at a time SKU For technical questions, please call Never attempt to drill more than one workpiece at a time Drill Press Safety RulesLathe Safety Rules Always feed the workpiece against the rotation of the Cutter ROUTER/SHAPER Safety RulesDisc Sander Safety Rules Horizontal Boring Safety RulesMISC. Safety Rules See Figure B, next Extension CordsUnpacking SymbologyFeet Figured Product FeaturesTo Move the Powerhead Power KEYTo Adjust Speed Belts and Pulleys To Move the Quill FeedTo Move the Carriage To Mount Collets with the DrawbarTo Install the Casters Assembly Instructions To Attach the Shelf to the StandSee Figure E and Assy. Diagram, See Figure F, next page and Assy. Diagram,To Mount the Machine Onto the Stand To Attach a SAW Blade to the Arbor See Figure I, next page and Assy. Diagram,See Figure J and Assy. Diagram, To Install the Lower Blade GuardTo Assemble the Main Table See Figure K and Assy. Diagram,See Figure L and Assy. Diagram, To Install the Extension TableTo Install the Miter Gauge To Install the RIP Fence and TOP GuardSee Figure M and Assy. Diagram, Assy. Diagram,To SET UP the Vertical Drill Press To Install the Disc SanderSee Figure P, next Figure P To SET UP the Horizontal Boring ToolTo SET UP the Router To SET UP the ShaperSee To SET UP the Lathe Installing and Using the Cutter GuardFigure S Figure T See Figure TTo Align the SAW Degrees to the SAW Blade To Align the SAW Table to the SAW BladeTo Align the Miter Gauge To Adjust the SAW TABLE’S 45 Degree StopTo Align the Extension Degrees to the SAW Blade To SET the Carriage Bumper Bolt To Align the SAW Degrees to the PowerheadTo Align the Lathe Tailstock with the Powerhead Parts List Cabinet & Casters Speed ChartAssembly Diagram Cabinet & Casters Parts List Main BED Assembly Diagram Main BED Parts List -Head Assy Parts List head assy. Assembly Diagram Head Assy Parts List Carriage Assy Assembly Diagram Carriage Assy Parts List SAW Table Assy Assembly Diagram SAW Table Assy Parts List SAW Guard Assy Assembly Diagram SAW Guard Assy Parts List RIP Fence Assembly Diagram Parts List & ASSY. Diagram Lathe Tailstock Assy Parts List & ASSY. Diagram EXT. Table Assy Parts List & ASSY. Diagram Sanding Disc Assy Parts List & ASSY. Diagram Tool Mounting Assemblies Parts List & ASSY. Diagram Tool Rest Parts List & ASSY. Diagram Miter Gauge Assy Parts List Electrical System Assembly Diagram Electrical System Please Read the Following Carefully Limited 1 year / 90 Day warranty