
TO INSTALL THE RIP FENCE AND TOP GUARD
1.Slide the Rip Fence onto the front and back Tubular Guides, and align the Rip Fence with the edge of a table slot. Then tighten the front Lock.
(See Figure M and Assy. Diagram, page 50.)
2.Align the mounting hole at the rear of the Top Guard with the threaded mounting hole at the rear of the Table. Then tighten the Handle to secure the Top Guard in place. (See Figure M and Assy. Diagram, page 50.)
FIGURE M
TO INSTALL THE MITER GAUGE
Remove the Knurled Knob from the mounting post on the Miter Gauge. Slip the Clamp into the slot on the Miter Gauge Handle. Then, reinstall the knurled Knob. Make sure to screw the knurled Knob down through the Clamp to hold it in place. (See Figure N and
Assy. Diagram, page 56.)
FIGURE N
SKU 96067 | For technical questions, please call | Page 27 |