Harbor Freight Tools 96067 operating instructions Specifications

Page 4

Specifications

Electrical

120 VAC / 7.5 A / Single Phase/15 Amps at full load

1.5 HP Motor Power Cord Type: 14 AWG x 3 C / 8’ Long

Requirements

Power Switch Type: 2-Position Key Switch

 

Machine Features

Table Saw / Disc Sander / Boring Machine

Lathe / Drill Press / Router & Shaper / Mill Machine

 

 

Sanding Disc Assy. (Qty. 1) / Drill Press Insert (Qty. 1) / Router (Qty. 1)

 

Air Breather Mask (Qty. 1) Earplug Set (Qty. 1) / R8 Collet (Qty. 1)

 

Drawbar Handle (Qty. 1) / Wood Turning Faceplate (Qty. 1) / Dead

 

Center (Qty. 1)

Accessories

Center Cup (Qty. 1) / Tension Wrench (Qty. 1) / Wrench Nut (Qty. 1)

 

Saw Arbor (Qty. 1) Lathe Tool Rest & Post (Qty. 1) / Shaper Arbor (Qty. 1)

 

Rip Fence (Qty. 1) / Miter Gauge Assy. (Qty. 1) / Upper Saw Guard Assy.

 

(Qty. 1) Extension Table Assy. (Qty. 1) / Spindle Guard (Qty. 1)

 

11-7/8” Disc Grinding Pads (Qty. 2)

Lathe Swing/Taper

17-5/16” (440mm) / #2 Morse Taper

Quill Travel

4-15/16” (125mm)

Distance Between

33-7/8” (860mm)

Centers

 

Vertical Mill

20-7/8” (530mm)

Maximum Depth of Cut

3-15/16” (100mm)

Taper of Spindle Bore A

M.T. #5

Drilling Capacity

5/8” (16mm)

Disc Sander

12” Diameter

Wooding Cutting

10” or 12”

Blade Size

 

Speed Range

Variable 32 to 7200 RPM

Table Size

23” L x 17” W x 2” H

Hole Through

29/32” (23mm)

Spindle Bore B

 

Overall Size

68.5” x 21.6” x 40.7”

Net Weight

456 Pounds

Note: This tool is pre-wired with a 120 V power cord and plug. This tool is dual voltage (120V/220V). Converting this tool to 220V should only be done by a certified electrician.

SKU 96067

For technical questions, please call 1-800-444-3353.

Page

Image 4
Contents Woodworking Machine Contents GroundingParts Lists and Diagrams Specifications General Safety Rules Personal SafetySave This Manual Work AreaService Tool Use And CareSpecific Safety Rules Mechanical PrecautionsNoise Precaution Table SAW Safety RulesNever attempt to cut more than one workpiece at a time SKU For technical questions, please call Drill Press Safety Rules Never attempt to drill more than one workpiece at a timeLathe Safety Rules ROUTER/SHAPER Safety Rules Always feed the workpiece against the rotation of the CutterHorizontal Boring Safety Rules Disc Sander Safety RulesMISC. Safety Rules Extension Cords See Figure B, nextUnpacking SymbologyFeet Product Features FiguredPower KEY To Move the PowerheadTo Adjust Speed Belts and Pulleys To Move the Quill FeedTo Mount Collets with the Drawbar To Move the CarriageAssembly Instructions To Attach the Shelf to the Stand To Install the CastersSee Figure E and Assy. Diagram, See Figure F, next page and Assy. Diagram,To Mount the Machine Onto the Stand See Figure I, next page and Assy. Diagram, To Attach a SAW Blade to the ArborTo Install the Lower Blade Guard See Figure J and Assy. Diagram,See Figure K and Assy. Diagram, To Assemble the Main TableTo Install the Extension Table See Figure L and Assy. Diagram,To Install the RIP Fence and TOP Guard To Install the Miter GaugeSee Figure M and Assy. Diagram, Assy. Diagram,To SET UP the Vertical Drill Press To Install the Disc SanderSee Figure P, next To SET UP the Horizontal Boring Tool Figure PTo SET UP the Router To SET UP the ShaperSee Installing and Using the Cutter Guard To SET UP the LatheFigure S See Figure T Figure TTo Align the SAW Table to the SAW Blade To Align the SAW Degrees to the SAW BladeTo Align the Miter Gauge To Adjust the SAW TABLE’S 45 Degree StopTo Align the Extension Degrees to the SAW Blade To Align the SAW Degrees to the Powerhead To SET the Carriage Bumper BoltTo Align the Lathe Tailstock with the Powerhead Speed Chart Parts List Cabinet & CastersAssembly Diagram Cabinet & Casters Parts List Main BED Assembly Diagram Main BED Parts List -Head Assy Parts List head assy. Assembly Diagram Head Assy Parts List Carriage Assy Assembly Diagram Carriage Assy Parts List SAW Table Assy Assembly Diagram SAW Table Assy Parts List SAW Guard Assy Assembly Diagram SAW Guard Assy Parts List RIP Fence Assembly Diagram Parts List & ASSY. Diagram Lathe Tailstock Assy Parts List & ASSY. Diagram EXT. Table Assy Parts List & ASSY. Diagram Sanding Disc Assy Parts List & ASSY. Diagram Tool Mounting Assemblies Parts List & ASSY. Diagram Tool Rest Parts List & ASSY. Diagram Miter Gauge Assy Parts List Electrical System Assembly Diagram Electrical System Limited 1 year / 90 Day warranty Please Read the Following Carefully