Black & Decker BDCD220IA-1 Operating Instructions, To install battery pack Insert battery pack

Page 8

To install battery pack: Insert battery pack

into tool until an audible click is heard as shown in C figure C. Make sure battery pack is fully seated and fully latched into position.

To remove battery pack: Depress the battery release button as shown in figure D and pull battery pack out of tool.

D

Operating Instructions

 

Variable Speed Trigger Switch (Fig. E)

 

To turn the tool on, squeeze the trigger switch (1).

 

To turn the tool off, release the trigger switch. Your

 

tool is equipped with a brake. The chuck will stop

 

as soon as the trigger switch is fully released. The

 

variable speed switch enables you to select the best

 

speed for a particular application. The more you

 

squeeze the trigger, the faster the tool will operate.

 

 

 

 

Use lower speeds for starting holes without a

 

center punch, drilling in metals or plastics, or driving

E

screws. For maximum tool life, use variable speed

 

only for starting holes or fasteners.

 

NOTE: Continuous use in variable speed range is

 

not recommended. It may damage the switch and

 

should be avoided.

1

 

 

Forward/Reverse Control Button (Fig. F)

 

A forward/reverse control button (2) determines

 

the direction of the tool and also serves as a lock

 

off button. To select forward rotation, release the

 

trigger switch and depress the forward/reverse

 

control button on the right side of the tool. To select

 

 

reverse, depress the forward/reverse control button on the left side of the tool. The

center position of the control button locks the tool in the OFF position. When changing

the position of the control button, be sure the trigger

 

is released.

F

NOTE: The first time the tool is run after changing

the direction of rotation, you may hear a click on

 

start up. This and the impacting noise that the tool

 

makes is normal and does not indicate a problem.

2

LED Worklight (Fig. G)

 

There is a worklight (5) located just above the

 

trigger switch (A). The worklight will be activated

 

when the trigger switch is squeezed.

 

NOTE: The worklight is for lighting the immediate

 

work surface and is not intended to be used as a

 

flashlight.

 

 

 

 

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents 20V max* Cordless Impact driver Save all warnings and instructions for future reference Safety Guidelines DefinitionsWork Area Safety Specific Safety Rules Symbols Total Length of Cord Recommended Minimum Wire Size for Extension CordsWire Size AWG Charging Procedure Charge the battery packs only in Black & Decker chargersRead all Instructions Storage RecommendationsInstalling and Removing the Battery Pack From the Tool To install battery pack Insert battery pack Variable Speed Trigger Switch Fig. EOperating Instructions Forward/Reverse Control Button Fig. FTroubleshooting MaintenanceProblem Possible Cause Quick Release Chuck FIG. HRbrc Seal AccessoriesBattery Service Information Two-YEAR Limited Warranty See ‘Tools Electric’ Yellow Pages For Service SalesVisseuse à Perceuse Sans FIL DE 20V MAX Lignes directrices en matière de sécurité définitions Engendrés par les poussières Consignes de sécurité particulières Porter UN Équipement DE Protection HomologuéSymboles SécuritéImpacts par minute Coups par minuteCalibre de fil minimum recommandé pour les rallonges Longueur totale de la rallongeLire toutes les directives Conserver CES DirectivesDirectives de sécurité importantes pour les blocs- piles Recommandations en matière de rangement Avertissement de sécurité et directives perceusesProcédure de charge Remarques importantes pour le chargementInsertion et retrait du bloc-piles de l’outil Bloc-pilesAvertissement Avant de changer FonctionnementAccessoires Dépannage Problème Cause possible Solution possibleEntretien Maximiser la durée de vie duLe sceau Rbrcmc Page Information sur les réparations Garantie Limitée DE Deux ANSDestornillador de impacto Inalámbrico DE 20V MÁX Pautas DE SEGURIDAD/DEFINICIONES Seguridad eléctricaNormas de seguridad específicas De encendido puede propiciar accidentesConserve LAS Instrucciones Símbolos Terminal a tierraSeguridad Tamaño AWG del conductorSuperior e inferior de la cubierta Lea todas las instrucciones Recomendaciones con respecto al almacenamiento Procedimiento de cargaDejar la batería en el cargador Notas importantes sobre la cargaPage Instrucciones de operación Interruptor disparador de velocidadVariable Figura E Botón de control de avance/reversaPortabrocas de liberación rápida Para instalar un accesorio, quite el anillo delPara quitar un accesorio, quite el anillo del Espacio en la herramienta para guardar puntasDetección de problemas Problema Causa posible Solución posibleMaximizar la vida útil del Solamente para Propósitos de MéxicoAccesorios MantenimientoPage Información de mantenimiento Garantía Limitada DE Dos Años Años DE Garantia Esta Garantia no Aplica CuandoSolamente Para Propositos DE Mexico Page 20V MAX* Cordless Drill Catalog NumberGeneral Power Tool Safety Warnings Page Ansi Z87.1 eye protection CAN/CSA Z94.3 Volts Hertz WattsDamage to electric plug and cord Minimum wire sizeElectric shock or electrocution Read ALL Instructions SummerRecycling Pattern indicated on the labelSafety Warnings and Instructions Drills Installing and Removing the Battery Pack from the ToolTrigger Switch & Reversing Button Figure D Before installing or removing accessoriesTorque Control Figure E Keyless Chuck Figure FDual Range Gearing Figure G Screw DrivingOn Board BIT Storage Figure H DrillingDrilling in Masonry MaintenanceDrilling in Metal Service Information Full TWO-YEAR Home USE Warranty Mode DʼEMPLOI DE LA Perceuse Sans FIL DE 16V MAX*, 20V MAX Page Deélectriquelʼoutil électrique ContrôlerIns médicaux Le liquide qui gicle Utilisation sécuritaire de lʼoutil électriqueExposition au bruit peut entraîner une perte auditive Peut entraîner des blessures corporellesToujours Porter UN Équipement DE Protection Homologué Tours à la minuteChargeurs DE Piles Guirlande. Cela permet de réduire le risqueDʼendommager la fiche ou le cordondʼalimentation Ou une électrocutionRisques de choc électrique, dʼélectrocution ou dʼincendie Manuels fournis avec lʼoutil avant dʼutiliser le chargeurConsignes de chargement décrites Sont dégagées lorsque les blocs-piles sont incinérésRecommandations EN Matière DE Rangement Fonctions DE Diagnostic DU ChargeurProcédure DE Charge Pile EN Mauvais ÉtatNe jamais ouvrir le bloc-piles pour Insertion ET Retrait DU BLOC-PILES DE LʼOUTILInsertion DU BLOC-PILES Insérer le bloc-piles Retrait DU BLOC-PILES Enfoncer le bouton deMandrin Sans CLÉ Figure F Détente ET Bouton Inverseur Figure DRéglage DU Couple Figure E Vissage Rangement Intégré DES Mèches Figure HPerçage Perçage DU BoisLE Sceau Rbrcmc Perçage DE LA MaçonnerieDépannage MaximiserladuréedevieduInformation SUR LES Réparations Manual DE Instrucciones DEL Taladro Inalámbrico DE 20V MÁX Pautas DE SEGURIDAD/DEFINICIONES Seguridad eléctricaMantenimiento adecuado.Las herramientas de Uso y mantenimiento de la herramienta con bateríasQuemadurasterminal al otroo incendio Garantizará la seguridad de la herramienta eléctricaPuede ocasionar la pérdida de la audición Control podría ocasionar lesiones personalesTerminales de conexión a tierre Símbolo de alertaRiesgo de descarga eléctrica, electrocución o incendio LEA Todas LAS InstruccionesElectrocución Procedimiento DE Carga Cargue los paquetes de baterías sólo con cargadoresdeRecomendaciones CON Respecto AL Almacenamiento Diagnóstico DEL Cargador Batería EN MAL EstadoRetraso POR Paquete CALIENTE/FRÍO Dejar LA Batería EN EL CargadorInterruptor Disparador Y Botón DE Inversión Figura D Para Instalar EL Paquete DE BateríasPara Extraer EL Paquete DE Baterías Ajuste DEL Control DE Torsión Figura E Portabrocas SIN Llave Figura FAdvertencia Asegúrese de que el botón AccesoriosDestornillado Espacio EN LA Herramienta Para Guardar Brocas Figura HTaladrado Taladrado EN MaderaProblema Detección DE ProblemasMaximizarlavidaútildel Ayuda Black & Decker al 01 800 847 2309/01 800 847Page Product Infomation · Identificación DEL Producto Htas. Portátiles de Chihuahua Ferre Pat de Puebla, S.A. de C.VPerfiles y Herramientas de Morelia Servicio de Fabrica Black & Decker

BDCD220IA-1, BDCD220IA specifications

The Black & Decker BDCD220IA and BDCD220IA-1 are versatile and powerful cordless drill/driver tools that cater to both DIY enthusiasts and professionals alike. Designed for maximum efficiency and ease of use, these models stand out with a variety of features and technologies that make them a reliable choice for various drilling and fastening tasks.

One of the key features of the BDCD220IA series is its lightweight design, making it easy to handle and operate for extended periods without causing undue strain on the user. This is particularly beneficial when working in tight spaces or overhead applications. Weighing in at just under 3.5 pounds, it allows for increased maneuverability and comfort during prolonged use.

The BDCD220IA is equipped with a robust 20V MAX lithium-ion battery that provides extended runtime and less downtime between charges. This innovative battery technology ensures that the drill delivers consistent performance, allowing users to tackle a range of projects with confidence. The package includes a smart charger that prepares the battery for use in a short amount of time, making it perfect for busy individuals.

Another notable characteristic of this drill/driver is its high-performance, variable-speed motor. With a maximum speed of up to 650 RPM, it allows for precision drilling in various materials, including wood, metal, and plastic. The two-speed transmission further enhances versatility, enabling users to select the appropriate speed for the task at hand, whether it’s a delicate job or heavy-duty drilling.

The ergonomic grip design ensures comfort and control, minimizing user fatigue. Additionally, the BDCD220IA features a built-in LED work light that illuminates dark work areas, providing users with improved visibility and precision in low-light conditions.

Furthermore, the tool is designed with a keyless chuck that makes changing drill bits and accessories quick and easy, fostering efficiency while working on different projects. Its compact size and design mean it can be conveniently stored and transported, making it an ideal tool for both home and professional use.

In summary, the Black & Decker BDCD220IA and BDCD220IA-1 are exceptional cordless drill/drivers featuring powerful performance, innovative battery technology, and user-friendly designs. These tools are perfect for a variety of tasks, ensuring that users have the capabilities they need to bring their projects to life. Whether tackling a home improvement goal or a professional task, these drill/drivers are reliable companions for any user.
Top Page Image Contents