Grizzly G1033X owner manual Box Inventory Figure Qty

Inventory

After all the parts have been removed from the crate, you should have the following items:

Box Inventory (Figure 3)		Qty
A.	Planer Unit	1
B.	Dust Hood	1
C.	Table Extension Wings	2
D.	Handwheel	1

E.Hardware and Tools (Not Shown)

•	T-Handle Wrench T-25	1
•	Torx Drivers T-25	10
•	Indexable Carbide Inserts	5
• Flat Hd Torx Screws #10-32 x 1⁄2"		20
• Hex Wrenches 3, 4, 5, 6mm		4
• Wrenches 8/10, 12/14, 17/19		3
• Set Screws M8-1.25 x 20 (Wings)		6
• Hex Bolts M8-1.25 x 25 (Wings)		6
•	Handwheel Bushing (Handwheel)	1
•	Handwheel Handle (Handwheel)	1
• Hex Nut M12-1.75 (Handwheel)		1
• Flat Washer 12mm (Handwheel)		1
• Key 4 x 4 x 10 (Handwheel)		1
• Flange Bolts M6-1 x 12 (Dust Hood)....		6

Model G1033X (Mfg. since 4/10)

A

B D

C

Figure 3. Planer box inventory.

In the event that any nonproprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them, or for the sake of expedi- ency, replacements can be obtained at your local hardware store.

NOTICE

Some hardware/fasteners on the inventory list may arrive pre-installed on the machine. Check these locations before assuming that any items from the inventory list are miss- ing.

-11-