Black & Decker 492777-00 instruction manual Installing and Removing a Router BIT FIG. a

Page 9

492777-00 FS1200RP Router 2/6/06 1:02 PM Page 9

Motor

Be sure your power supply agrees with nameplate marking. 120 Volts AC only means your tool will operate on standard 60 Hz household power. Do not operate AC tools on DC. A rating of 120 volts AC/DC means that your tool will operate on standard 60 Hz AC or DC power. This information is printed on the nameplate. Lower voltage will cause loss of power and can result in over-heating. All Black & Decker tools are factory-tested; if this tool does not operate, check the power supply.

ASSEMBLY

WARNING: To prevent personal injury, always disconnect plug from power source before assembly, making adjustments or changing bits. Failure to do so could result in accidental starting and possible injury.

INSTALLING AND REMOVING A ROUTER BIT (FIG. A)

WARNING: Turn the router off and disconnect it from the power supply.

Installing

•Remove the chip shield (9).

•Keep the spindle lock button (5) depressed and rotate the spindle until the spindle lock fully engages.

•Place the router upside down on a smooth, flat surface.

•Loosen the collet nut (16) using the spanner wrench provided.

•Insert the shank of the router bit (17) into the collet (6)(two collets are provided, 1/4” or 1/2”). Make sure that the shank protrudes at least 1/8” (3mm) from the collet as shown.

•Keep the spindle lock button (5) depressed and tighten the collet nut (16) using the spanner provided.

Removing

CAUTION: Burn Hazard. Router bits get hot during use. Allow sufficient time for bit to cool before replacing.

•Keep the spindle lock button (5) depressed.

•Loosen the collet nut (16) using the spanner wrench provided.

ATTACHING THE EDGE GUIDE (FIG. B)

WARNING: Turn the router off and disconnect it from the power supply. The edge guide helps to guide the tool parallel to an edge.

•Fit the bars (18) to the edge guide (11) using the two screws (19) provided.

•Insert the bars (18) into the router base as shown.

•Set the edge guide to the required distance.

•Tighten the fixing screws (20).

ATTACHING THE DUST EXTRACTION ADAPTOR (FIG. C)

The dust extraction adaptor allows you to connect a vacuum cleaner to the tool.

•Place the dust extraction adaptor (10) onto the dust extraction outlet as shown.

•Connect the hose (23) of the vacuum cleaner to the adaptor.

ATTACHING THE TEMPLATE GUIDE (FIG. C & D)

•Attach the template guide (12) to the base of the router, with the flange to the bottom side.

•Insert the two long screws (24) from the bottom side through the template guide and the holes in the base.

•Place the dust extraction adaptor on top of the base as shown in fig. C.

•Place a nut onto each of the screws and securely tighten the nuts.

ATTACHING THE CENTERING PIN (FIG. E)

•Attach the edge guide to the router as shown in fig. B, but upside down.

•Attach the centering pin (14) to the workpiece side of the edge guide with the screw (25) provided.

OPERATION

WARNING: To prevent personal injury, always disconnect plug from power source before assembly, making adjustments or changing bits. Failure to do so could result in accidental starting and possible injury.

WARNING: To reduce the risk of injury, do not overload the tool. Let it work at its own pace.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Instruction Work Area Safety Electrical SafetyPersonal Safety Power Tool USE and Care ServiceSpecific Safety Rules Earthing terminal Features 102 PM 102 PM Bits Available AS Accessories not Supplied Attaching the Edge Guide FIG. B Installing and Removing a Router BIT FIG. aAttaching the Dust Extraction Adaptor FIG. C Attaching the Template Guide FIG. C & DAdjusting the Depth of CUT Using the Scale FIG. G Adjusting the Depth of CUT FIG. F, G & HAdjusting the Depth of CUT Using a Piece of Wood FIG. H Adjusting the Turret Depth Stop FIGUsing the Template Guide FIG. D Using a Straight Edge AS a Guide FIG. JUsing the Centering PIN FIG. E Switching on and OFFProblem Possible Cause Solution Using the Router with Dust ExtractionMaintenance Hints for Optimum USEService Information Full TWO-YEAR Home USE Warranty AccessoriesCovered Under OUR Warranty HOW-TOMode ’EMPLOI Sécurité EN Matière D’ÉLECTRICITÉ Sécurité DU Lieu DE TravailUtilisation ET Entretien D’UN Outil Électrique Sécurité PersonnelleRègles DE Sécurité Spécifiques RéparationMoteur Caractéristiques 492777-00 FS1200RP Router 2/6/06 102 PM 102 PM Fraises Disponibles Comme Accessoires NON Comprises Insertion Insertion ET Retrait D’UNE Fraise FIG. aFixation DU Guide DE Chant FIG. B Fixation DU Guide Pour Gabarit FIG. C ET DRéglage DE LA Profondeur DE Coupe FIG. F, G ET H Réglage DE LA Profondeur DE Coupe SUR L’ÉCHELLE FIG. GRéglage DE LA Butée D’ARRÊT DE LA Tourelle FIG Mollette DE Contrôle Électronique DE LA Vitesse Fonction DE Démarrage SoupleContrôle DE Vitesse Électronique CVE Utilisation D’UNE Règle Droite Comme Guide FIG. JUtilisation DE LA Défonceuse Avec L’ASPIRATEUR Vitesse ET Taux DE RainurageConseils Pour UNE Utilisation Optimale Fraises DE Toupie FIG. M NON ComprisesAccessoires Problème possible Cause possible SolutionBlack & Decker au EntretienPeuvent PAS Être Couverts PAR Notre Garantie Garantie Spéciale Avis Pour LES EntrepreneursManual DE Seguridad Eléctrica Seguridad EN EL Área DE TrabajoUSO Y Mantenimiento DE LA Herramienta Eléctrica Seguridad PersonalNormas DE Seguridad Específicas MantenimientoReciprocaciones por minuto Características 492777-00 FS1200RP Router 2/6/06 102 PM 492777-00 FS1200RP Router 102 PM Brocas Disponibles Como Accesorios no SE Suministran Conexión DE LA Guía DE Corte FIG. B Instalación Y Extracción DE UNA Broca DE Rebajadora FIG. aConexión DEL Adaptador Para Extracción DE Polvo FIG. C Conexión DE LA Guía DE Corte FIG. C Y DAjuste DE LA Profundidad DE Corte FIG. F, G Y H Ajuste DE LA Profundidad DE Corte CON LA Escala FIG. GAjuste DEL Tope DE Profundidad CON Torreta FIG Disco Electrónico DE Control DE Velocidad Encendido SuaveControl Electrónico DE Velocidad CSE Utilice UNA Regla Como Guía FIG. JVelocidad DE Alimentación Y Avance DEL Corte USO DE LA RebajadoraUSO DE LA Rebajadora CON UN Extractor DE Polvo Consejos Para Optimizar EL USODetección DE Problemas Problema Causa posible Solución posibleImportante Nota Especial Sobre LA Garantíaa Contratistas AccesoriosGUADALAJARA, JAL CULIACAN, SIN MONTERREY, N.LPUEBLA, PUE MEXICO, D.F
Top Page Image Contents