Elektra Beckum Official Manual for TF Sander

ENG

Contents		11	Tool Dimensions/Cutting Speeds
1	Specifications	12	Jigs And Push Blocks
2	User Responsibility	13	Controls
3	Standard Delivery	13.1	Definitions
4	Optional Accessories	13.2	Mounting A Tool
5	Final Assembly	13.3	Spindle Speed Setting/Changing
6	Installation	13.4	Tool Height Setting
7	Commissioning	13.5	Fence And Fence Plate Setting
7.1	1-Phase Power Supply	13.6	Cutter Guard Setting
7.2	3-Phase Power Supply	14	Operation
7.3	Direction Of Rotation	14.1	Tools
7.4	Switch	14.2	Stock Prechecking
7.5	Overload Protection	14.3	Moulding Strips
7.6	No-Voltage Release	14.4	Moulding Boards
7.7	Dust Collection	14.5	Making Tenons
7.8	Dust Collector Automatic Start	14.6	Set-In Work
8	Safety Information	15	Care And Maintenance

9Workpiece Dimensions

10Scope Of Application

1 Specifications	TF 100 M 2.2 WN	TF 100 M 2.8 DN
Table top	523 x 423 mm	523 x 423 mm
Workpiece support area	150-210 x 600 mm	150-210 x 600 mm
Working height from floor	850 mm	850 mm
Table opening Ø	150 mm	150 mm
Table rings	2	2
Fence travel	30 mm	30 mm
Dust extraction outlet Ø	100 mm	100 mm
Max. tool diameter	150 mm	150 mm
Max. tool height	60 mm	60 mm
Spindle diameter	30 mm	30 mm
Spacing collar Ø	50 mm	50 mm
Spindle vertical adjustment	100 mm	100 mm
Spindle speeds	4000/6000/7500 min-1	4000/6000/7500 min-1
Motor input capacity P1	2.2 kW S6 - 40%	2.8 kW S6 - 40%
Motor output capacity P2	1.1 kW S6 - 100%	1.4 kW S6 - 100 %
Operating voltage	220-240 V 1~50 Hz	380-415 V 3~50 Hz

Noise Emission

The noise emission levels shown below have been established by measuring methods according to: DIN 45 635, part 1651.

The A-sound power levels (LWA) were rounded to full dB(A).

1. TF 100 operating under no load
A-sound pressure level LpA	77 dB(A)	77 dB(A)
A-sound power level LWA	86 dB(A)	86 dB(A)
2. TF 100 operating under load
A-sound pressure level LpA	82 dB(A)	82 dB(A)
A-sound power level LWA	91 dB(A)	77 dB(A)

2 User Responsibility

This machine will perform in conformity with the description contained in the instructions provided. This machine must be checked periodically. Defective equipment (including power cables) should not be used. Parts that are broken, missing, plainly worn, distorted or contaminated, should be replaced immediately. Should such repair or replacement become necessary, it is recommended that such repairs are carried out by qualified persons approved by metabo or its representatives.