13.3 Spindle Speed Setting/Changing
Remove the plastic cover to have access.
Loosen the ratchet lever and place belt on the desired step of the pulleys. Available speeds are:
top | = | 4000 |
centre | = | 6000 |
lower | = | 7500 |
Tighten the belt and replace the plas- tic guard.
13.4 Tool Height Setting
If the tool is only partially used and | Spindle vertical adjustment is | After a spindle height adjustment lock |
needs to be lowered below the table, | achieved by turning the handwheel | in position by engaging the spindle |
remove the table rings before moun- | inside the main frame. Turn | lock lever. |
ting it on the spindle. | - clockwise to raise |
|
| - |
|
Caution!
Switch machine off and let tool come to a complete stop before making any adjustments.
13.5 Fence And Fence Plate Setting
A | A | B | B |
Caution!
Switch machine off and let tool come to a complete stop before making any adjustments.
Loosen both starknobs (A) to move the fence forward or backwards.
Loosen the starknobs (B) to reposi- tion the fence plates.