Black & Decker BDCDMT120FL, BDCDMT120C, BDCDMT120-2, BDCDMT120IA Troubleshooting, Rbrc Seal

Page 12

Troubleshooting

Problem

Possible Cause

Possible Solution

• Unit will not start.

• Battery pack not installed properly.

• Check battery pack installation.

 

• Battery pack not charged.

• Check battery pack charging

 

• Attachment is not secured.

requirements.

 

• Make certain the attachment is fully

• Battery pack will not charge. • Battery pack not inserted into charger.

pushed into the Power Unit.

• Insert battery pack into charger until

 

• Charger not plugged in.

LED illuminates.

 

• Plug charger into a working outlet.

 

 

Refer to “Important Charging Notes”

 

• Surrounding air temperature

for more details.

 

• Move charger and battery pack to a

 

too hot or too cold.

surrounding air temperature of above

 

 

40 degrees F (4,5°C) or below 105

• Unit shuts off abruptly.

• Battery pack has reached its

degrees F (+40,5°C).

• Allow battery pack to cool down.

 

maximum thermal limit.

• Place on charger and

 

• Out of charge. ( To

 

maximize the life of the

allow to charge.

battery pack it is designed to shutoff abruptly when the charge is depleted.)

For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK & DECKER help line at 1-800-544-6986.

Maintenance

Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service personnel, always using identical replacement parts.

Accessories

WARNING: The use of any accessory not recommended for use with this tool could be hazardous. Recommended accessories for use with your tool are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call: 1-800-544-6986.

The RBRC™ Seal

The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on the lithium-ion battery (or battery pack) indicates that the costs to recycle the battery (or battery pack) at the end of its useful life have already been paid by Black & Decker. In some areas, it is illegal to place spent lithium-ion batteries in the trash or municipal solid waste stream and the RBRC program provides an environmentally conscious alternative.

RBRC in cooperation with Black & Decker and other battery users, has established programs in the United States and Canada to facilitate the collection of spent lithium-ion batteries. Help protect our environment and conserve natural resources by returning the tool to an authorized Black & Decker service center for recycling. You may also contact your local recycling center for information on where to drop off the spent battery, or call 1-800-8-BATTERY.

This Class B digital apparatus complies with Canadian ICES-003.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Catalog Number BDCDMT112 12V MAX BDCDMT120 20V MAX Save this manual for Future referenceVEA EL ESPA-OL EN LA Contraportada Safety Guidelines Definitions Work Area SafetySpecific Safety Rules Always Wear Certified Safety EQUIPMENT  SymbolsImportant Safety Instructions for Battery Chargers FUNCTIONAL DESCRIPTIONRead all Instructions Minimum Gauge for Cord Sets Volts12volt max* Charging Procedure 20volt Max** Charging Procedure Operating Power Unit Trigger Switch & forward/Reverse sliderInstalling and removing attachments Figure G Safety Warnings and Instructions DrillsOperating Drill/Screwdriver attachment Fitting and removing a drill bit or screwdriver bitMake sure switch turns drill on and off Drilling in Wood Keyless Chuck figure HTorque Control figure On-board bit storageTroubleshooting Rbrc SealService Information Full Two-Year Home Use Warranty For Service & SalesSee ‘Tools-Electric’ Yellow PagesMode D’EMPLOI De catalogue BDCDMT112 12V MAX BDCDMT120 20V MAXLignes directrices en matière de sécurité définitions Modifiées correspondant à la prisePage Règles de sécurité spécifiques Symboles Description FonctionnelleAvertissement Lire toutes les directives Tension Longueur totale du cordon en pieds12volt max* Procédure de charge Remarques importantes pour le chargement 12volt max* Insertion et retrait du bloc-piles de l’outil20volt Max** Procédure de charge Bloc-piles laissé dans le chargeurInstallation ET Retrait DES Modules Figure G 20volt Max** Insertion et retrait du bloc-piles de l’outilDétente ET Commutateur Coulissant AVANT/ARRIÈRE Avertissement de sécurité et directives perceuses VissageRéglage du couple figure Rangement intégré des mèchesPerçage Dépannage Perçage DU BoisPerçage DU Métal EntretienLe sceau Rbrc Information sur les réparationsPage Manual DE Instrucciones Catálogo N BDCDMT112 12V MAX BDCDMT120 20V MAXPautas DE SEGURIDAD/DEFINICIONES Page Normas de seguridad específicas Descripción de las funciones SímbolosAdvertencia Lea todas las instrucciones AmperajeRecomendaciones con respecto al almacenamiento 12volt max* Procedimiento de cargaNotas importantes sobre la carga Herramienta20volt Max** Procedimiento de carga Para instalar el paquete de baterías Inserte el Para extraer el paquete de baterías Presione el botónInstalación Y Extracción DE Aditamentos Figura G Precaución Riesgo de descarga eléctrica. BajoColocación Y Extracción DE UNA Broca O UNA Punta DestornilladoPortabrocas sin llave figura H Ajuste del control de torsión figuraEspacio en la herramienta para guardar brocas TaladradoMantenimiento El sello Rbrc Información de mantenimientoGarantía completa de dos años para uso en el hogar Reemplazo DE LAS Etiquetas DE AdvertenciaEsta Garantia no Aplica Cuando Solamente Para Propositos DE Mexico

BDCDMT120IA, BDCDMT120C, BDCDMT120FL, BDCDMT120-2 specifications

The Black & Decker BDCDMT120-2, BDCDMT120FL, BDCDMT120C, and BDCDMT120IA are versatile and reliable power tools designed to cater to a range of home improvement tasks. These tools embody Black & Decker's commitment to quality, functionality, and user-friendliness across various DIY and professional applications.

The BDCDMT120-2 is a 20V Max Lithium-Ion compact cordless drill/driver that provides exceptional power and versatility. With its lightweight design, it offers enhanced maneuverability, making it excellent for both overhead and tight-space tasks. The drill features a two-speed transmission, allowing users to choose between 0-650 RPM for high-speed drilling or 0-450 RPM for increased torque. Additionally, the 11-position clutch helps prevent stripping screws and provides added control for precise tasks.

The BDCDMT120FL is an innovative oscillating multi-tool that stands out for its versatility. It comes equipped with a tool-free accessory change system, enabling quick transitions between sanding, cutting, and scraping tasks. Powered by a 20V Max Lithium-Ion battery, it ensures robust performance, and its variable speed control allows users to adjust the speed according to the specific application needs. With its ergonomic design, users can work comfortably for extended periods without fatigue.

The BDCDMT120C is a 20V Max cordless circular saw that delivers the power and precision required for cutting through various materials. Its 5-1/2 inch blade enables a maximum cutting depth of 1-5/8 inches, making it ideal for wood, plywood, and other materials. The saw features an integrated laser guide that aids in achieving accurate cuts, along with a lightweight design for ease of handling. Its base plate can be adjusted for bevel cuts, adding to its versatility.

Lastly, the BDCDMT120IA is a compact and robust impact driver that significantly enhances drilling and fastening efficiency. With a torque of up to 1,400 in-lbs and a maximum speed of 2,900 RPM, it easily drives screws through the toughest materials. The built-in LED work light illuminates dark workspaces, ensuring precision in low-light conditions. Its ergonomic grip further enhances control, allowing users to work comfortably during extended periods.

Together, these Black & Decker tools form a comprehensive solution for tackling a variety of home improvement projects. Their thoughtful design, advanced features, and powerful performance make them essential additions to any DIYer’s toolkit. Whether for drilling, cutting, or detailed work, these power tools provide the reliability and efficiency that Black & Decker is known for, empowering users to complete their projects with confidence.
Top Page Image Contents