20volt Max** Charging Procedure

4.The battery pack should be recharged when it fails to produce sufficient power on jobs which were easily done previously. DO NOT CONTINUE to use under these conditions. Follow the charging procedure. You may also charge a partially used pack whenever you desire with no adverse affect on the battery pack.

5.Foreign materials of a conductive nature such as, but not limited to, steel wool, aluminum foil, or any buildup of metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery

pack in the cavity. Unplug charger before attempting to clean. B

6.Do not freeze or immerse charger in water or any other liquid.

WARNING: Shock hazard. Do not allow any liquid to get inside charger.Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks or cracks, return to a service center for recycling.

12volt max* Installing and Removing the Battery
Pack From the power unit
Always ensure the forward/reverse slider (7) is in the center position
when installing and removing batteries.	C
WARNING: Make certain the lock-off button is engaged to
prevent switch actuation before removing or installing battery.
To install battery pack: Insert battery pack into the Power
Unit, until an audible click is heard as shown in Figure B. Make sure
the battery pack is fully seated and latched into position.
To remove battery pack: Depress the battery release button
(3) as shown in Figure C and pull battery pack out of the Power Unit.

20volt Max** Battery Pack (BDCDMT120) Charging, Installing, and Removing

Black & Decker chargers are designed to charge Black & Decker battery packs in 3.5-4 hours depending on the pack being charged.

1. Plug the charger (4) into an appropriate outlet before inserting the battery pack (5).

2. Insert the battery pack into the charger as shown in Figure D.

3. The green LED will flash indicating that the battery is being charged.

4. The completion of charge is indicated by the green LED remaining on continuously. The pack is fully charged and may be used at this time or left on the charger.

Recharge discharged batteries as soon as possible after use or battery life may be greatly diminished. For longest battery life, do not discharge batteries fully. It is recommended that the batteries be recharged after each use.

Leaving the battery in the charger

The charger and battery pack can be left connected with the green LED glowing indefinitely. The charger will keep the battery pack fresh and fully charged.

Important Charging Notes

1. Longest life and best performance can be obtained if the battery pack is charged when the air temperature is between 65°F and 75°F (18°- 24°C). DO NOT charge the battery pack in an air temperature below +40°F (+4.5°C), or above +105°F (+40.5°C). This is important and will prevent serious damage to the battery pack.

2. The charger and battery pack may become warm to touch while charging. This is a normal condition, and does not indicate a problem. To facilitate the cooling of the battery pack after use, avoid placing the charger or battery pack in a warm environment such as in a metal shed, or an uninsulated trailer.

BDCDMT120IA, BDCDMT120C, BDCDMT120FL, BDCDMT120-2 specifications

The Black & Decker BDCDMT120-2, BDCDMT120FL, BDCDMT120C, and BDCDMT120IA are versatile and reliable power tools designed to cater to a range of home improvement tasks. These tools embody Black & Decker's commitment to quality, functionality, and user-friendliness across various DIY and professional applications.

The BDCDMT120-2 is a 20V Max Lithium-Ion compact cordless drill/driver that provides exceptional power and versatility. With its lightweight design, it offers enhanced maneuverability, making it excellent for both overhead and tight-space tasks. The drill features a two-speed transmission, allowing users to choose between 0-650 RPM for high-speed drilling or 0-450 RPM for increased torque. Additionally, the 11-position clutch helps prevent stripping screws and provides added control for precise tasks.

The BDCDMT120FL is an innovative oscillating multi-tool that stands out for its versatility. It comes equipped with a tool-free accessory change system, enabling quick transitions between sanding, cutting, and scraping tasks. Powered by a 20V Max Lithium-Ion battery, it ensures robust performance, and its variable speed control allows users to adjust the speed according to the specific application needs. With its ergonomic design, users can work comfortably for extended periods without fatigue.

The BDCDMT120C is a 20V Max cordless circular saw that delivers the power and precision required for cutting through various materials. Its 5-1/2 inch blade enables a maximum cutting depth of 1-5/8 inches, making it ideal for wood, plywood, and other materials. The saw features an integrated laser guide that aids in achieving accurate cuts, along with a lightweight design for ease of handling. Its base plate can be adjusted for bevel cuts, adding to its versatility.

Lastly, the BDCDMT120IA is a compact and robust impact driver that significantly enhances drilling and fastening efficiency. With a torque of up to 1,400 in-lbs and a maximum speed of 2,900 RPM, it easily drives screws through the toughest materials. The built-in LED work light illuminates dark workspaces, ensuring precision in low-light conditions. Its ergonomic grip further enhances control, allowing users to work comfortably during extended periods.

Together, these Black & Decker tools form a comprehensive solution for tackling a variety of home improvement projects. Their thoughtful design, advanced features, and powerful performance make them essential additions to any DIYer’s toolkit. Whether for drilling, cutting, or detailed work, these power tools provide the reliability and efficiency that Black & Decker is known for, empowering users to complete their projects with confidence.