Hitachi B13F instruction manual Accessories and Attachments, Carton Contents

Page 7

English

ACCESSORIES AND ATTACHMENTS

RECOMMENDED ACCESSORIES

WARNING

To avoid injury:

•Use only accessories recommended for this Drill Press.

•Follow instructions that accompany accessories. Use of improper accessories may cause hazards.

•Use only accessories designed for this Drill Press to avoid injury from thrown broken parts or workpieces.

•Do not use any accessory unless you have completely read the instruction or operator’s manual for that accessory.

CARTON CONTENTS

UNPACKING AND CHECKING CONTENTS

Carefully unpack the Drill Press and all its parts, and compare against the illustration following. Place the saw on a secure surface and examine it carefully.

WARNING

•To avoid injury from unexpected starting, do not plug the power cord into a power source receptacle during unpacking and assembly. This cord must remain unplugged whenever you are assembling or adjusting the drill press.

•If any part is missing or damaged, do not plug the drill press in until the missing or damaged part is replaced, and assembly is complete.

•To protect the drill press from moisture, a protective coating has been applied to the machined surfaces. Remove this coating with a soft cloth moistened with kerosene or WD-40.

WARNING

To avoid fire or toxic reaction, never use gasoline, naphtha, acetone, lacquer thinner or similar highly volatile solvents to clean the drill press.

TABLE OF LOOSE PARTS

ITEM

DESCRIPTION

QUANTITY

DRILL PRESS:

 

A.

Head Assembly

1

B.

Table

1

C.

Base

1

D.

Column Assembly

1

E.

Feed Handle

3

F.

Crank Handle

1

G.

Batteries

2

LOOSE PARTS BAG:

 

H.

Hex Bolts

4

I.

Hex Wrench

1

J.

Flat Washers

4

BOX:

 

 

K.

Chuck Key

1

L.

Chuck

1

– 7 –

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Hitachi Hitachi Authorized Service Centers 61 LB 27.5 kg Product SpecificationsNET Weight MotorGeneral Safety Instructions SafetyBefore Using the Drill Press Specific Safety Instructions for the Drill Press Guidelines for Extension Cords Electrical RequirementsCarton Contents Accessories and AttachmentsUnpacking Your Drill Press Know Your Drill Press Drill Press Terms Glossary of TermsDepth Scale Stop Nuts Lock the spindle to a Tools Needed Assembly and AdjustmentsAssembly Instructions Estimated Assembly Time 20-40 MinutesInstalling the Chuck Fig. F and G Installing Battery for Laser Guide Fig. C-1Installing the Head Fig. D Installing Feed Handles Fig. EQuill Return Spring Fig. J Drill Press AdjustmentsTilting the Table Fig. H Spindle / Quill FigBelt Tension Fig. K Avoid Direct EYE ContactLaser Guide Basic Drill Press Operations OperationRemoving Chuck and Arbor Fig. R Basic Operation IstructionsYour Protection Drilling to a Specific Depth Fig. PFeeding Positioning the Table and Workpiece Fig. S and TBatteries MaintenanceMaintaining Your Drill Press LubricationProblem Probable Cause Remedy Troubleshooting GuideGeneral 27,5 kg 61 lb Spécifications DU ProduitMoteur Poids NETConsignes DE Sécurité Générales SécuritéAvant D’UTILISER Cette Perceuse Consignes DE Sécurité Spécifiques À LA Perceuse D’ÉTABLI AWG Avec du 120 V seulement Exigences ÉlectriquesDirectives Pour LES Rallonges Électriques Calibre Minimal Pour Cordons ProlongateursDéballage ET Vérification DU Contenu Accessoires ET ÉquipementsAccessoires Recommandés Contenu DU CartonDéballage DE LA Perceuse MARCHE/ARRÊT Connaître SA PerceuseInterrupteur DE MARCHE/ARRÊT DE Glossaire DES TermesBoutons DE Verrouillage DE Tension DE Écrous DE Blocage D’ÉCHELLE DEOutils Requis Assemblage ET AjustementsInstructions D’ASSEMBLAGE Temps D’ASSEMBLAGE Prévu 35 MinutesNstallation DES Leviers DE Manoeuvre Fig. E Installation DE LA Tête Fig. DInstallation DU Mandrin Fig. F et G Insertion DES Piles Dans LE Guide AU Laser Fig. C-1Ressort DE Rappel DE L’ARBRE Creux Fig. J Réglages DE LA PerceuseInclinaison DE LA Table Fig. H Broche / Arbre Creux FigTension DE LA Courroie Fig. K Éviter UN Contact Direct Avec LES YeuxLE Guide Laser Opérations DE Base DE LA Perceuse FonctionnementDépose DU Mandrin ET DE L’ARBRE Fig. R Instructions SUR LE Fonctionnement DE BaseVotre Protection Perçage À UNE Profondeur Spécifique Fig. PDoux Tableau DES Vitesses DE PerçageDiam Matériau Du foret Bois Plastique Acier InoxLubrification EntretienEntretien DE LA Perceuse PositionnementProblème Causes Probable Action Corrective Guide DE DépannagePeso Neto Especificaciones DEL ProductoMotor AmperiosInstrucciones Generales DE Seguridad SeguridadAntes DE Usar Esta Prensa Taladradora Especificaciones DE LA Alimentacion Electrica Y EL Motor Requisitos ElectricosCalibre Minimo Para Cables DE Extension AWG Pautas Para EL USO DE Cables DE ExtensionInstrucciones Para LA Conexion a Tierra EN Caso DE UN MAL Funcionamiento O UNADesempaque Y Verificacion DEL Contenido Accesorios Y AditamentosContenido DE LA Caja Accesorios RecomendadosDesempaque DE Prensa Taladradora Conozca SU Prensa Taladradora Interruptor DE Encendido Y Apagado DEL Taladro Glosario DE TerminosManillas DE Fijacion DE LA Tension DE LA Correa Tuercas DE Tope DE LA Escala DE ProfundidadInstruccioned DE Montaje Montaje Y AjustesHerramientas Necesarias Instalacion DEL Portabrocas Fig. F y G Instalacion DE LA Bateria Para LA Guia Laser Fig. C-1Instalacion DEL Cabezal Fig. D Instalacion DE LOS Mangos DE Alimentacion Fig. EResorte DE Retorno DEL Manguito Fig. J Ajustes DE LA Prensa TaladradoraInclinacion DE LA Mesa Fig. H Husillo / Manguito FigLA Guia Laser Tension DE LA Correa Fig. KEvite EL Contacto Directo CON LOS Ojos Operaciones Basicas DE LA Prensa Taladradora OperacionDesmontaje DEL Portabrocas Y EL Arbol Fig. R Instrucciones Basicas DE OperacionSU Proteccion Taladrado a UNA Profundidad Especifica Fig. PColocacion DE LA Mesa Y DE LA Pieza DE Trabajo Fig. S y T Tabla DE Velocidad DE Taladradora RPMDiám Material De broca Madera Plástico Acero Inoxid Pulg DulceLubricacion MantenimientoDele Mantenimiento a SU Prensa Taladradora AlimentacionProblema Causa Probable Solucion Guia DE Identificacion DE ProblemasGeneralidades 10 ″ Bench Drill Press Schematic aModel NO. B13F 10″ Bench Drill Press Model NO. B13F Parts List for Schematic aAlways Order by Part NO. and I.D. Number Hitachi Koki Canada Co

B13F specifications

The Hitachi B13F is a versatile and robust benchtop drill press designed to meet the demands of both professionals and hobbyists in various applications. Known for its reliability and precision, the B13F combines advanced technology with practical features that make it a popular choice among woodworkers, metalworkers, and those involved in DIY projects.

One of the standout features of the Hitachi B13F is its powerful 350-watt motor, which provides sufficient torque for a wide range of drilling operations. This motor is designed to handle heavier materials, ensuring that users can work with wood, metal, and plastics without compromising on performance. Additionally, the drill press offers a variable speed control system, allowing users to select from a speed range of 580 to 3,050 RPM, making it suitable for drilling different materials with ease and precision.

The B13F's 13mm keyless chuck provides convenience and quick tool changes, reducing setup time and enhancing productivity. This feature allows users to effortlessly switch between drill bits without the need for additional tools, which is especially beneficial for those who require frequent bit changes on the job site or in their workshops.

Precision is a hallmark of the Hitachi B13F, thanks in part to its laser guide system that aids in aligning the drill bit with the target material. This ensures accurate and clean holes, minimizing the risk of error in drilling. The drill press is equipped with an adjustable depth stop, enabling users to set the maximum drilling depth for consistent results across multiple holes.

The construction of the B13F is another highlight, with a sturdy cast iron base that provides stability during operation. This solid foundation minimizes vibrations, contributing to a smoother drilling experience and enhancing the overall accuracy of the tool. The height-adjustable work table also adds flexibility, allowing users to accommodate various workpiece sizes effortlessly.

Moreover, safety features such as the emergency stop switch and a built-in work light further enhance the usability of the Hitachi B13F, ensuring that operators can work efficiently while prioritizing safety.

In summary, the Hitachi B13F benchtop drill press combines power, precision, and convenience in a compact design. With advanced technologies such as variable speed control, a keyless chuck, and laser guiding capabilities, it stands out as a reliable tool for a wide range of drilling tasks, making it an excellent investment for both professional workshops and home garages.
Top Page Image Contents