Hitachi DN 12DY instruction manual Before USE, Operation, Mounting and dismounting the bit

Page 18

English

5.Remove the battery from the battery charger.

Supporting the battery charger with hand, pull out the battery from the battery charger.

CAUTION:

⬤When the battery charger has been continuously used, the battery charger will be heated, thus constituting the cause of the failures. Once the charging has been completed, give 15 minutes rest until the next charging.

⬤If the battery is recharged when it is warm due to battery use or exposure to sunlight, the pilot lamp may light in green.

The battery will not be recharged. In such a case, let the battery cool before charging.

⬤When the pilot lamp flickers in red (at 0.2–second intervals), check for and take out any foreign objects in the charger’s battery installation hole. If there are no foreign objects, it is probable that the battery or charger is malfunctioning. Take it to your authorized Service Center.

Regarding electric discharge in case of new batteries, etc.

As the internal chemical substance of new batteries and batteries that have not been used for an extended period is not activated, the electric discharge might be low when using them the first and second time. This is a temporary phenomenon, and normal time required for recharging will be restored by recharging the batteries 2 – 3 times.

How to make the batteries perform longer.

(1)Recharge the batteries before they become completely exhausted.

When you feel that the power of the tool becomes weaker, stop using the tool and recharge its battery. If you continue to use the tool and exhaust the electric current, the battery may be damaged and its life will become shorter.

(2)Avoid recharging at high temperatures.

A rechargeable battery will be hot immediately after use. If such a battery is recharged immediately after use, its internal chemical substance will deteriorate, and the battery life will be shortened. Leave the battery and recharge it after it has cooled for a while.

BEFORE USE

Check the work area to make sure that it is clear of debris and clutter.

Clear the area of unnecessary personnel. Ensure that lighting and ventilation is adequate.

OPERATION

1.Mounting and dismounting the bit

(1)Mounting the bit.

Insert a screwdriver bit etc. into the keyless drill chuck.

Firmly grasp the ring and tighten the sleeve by turning it toward the right (in the clockwise direction as viewed from the front). (See Fig.6)

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Variable speed AvertissementAdvertencia Perceuse dangle à batterieContents Important Safety Information Meanings of Signal WordsSafety General Safety Rules for ALL Battery Operated ToolsEnglish Specific Safety Rules and Symbols Carefully handle power tools Never use a tool which is defective or operating abnormallyDo not wipe plastic parts with solvent Important Safety Instructions for Battery Charger Remember Disposal of the Exhausted Battery Make Them Available to Other Users Owners of this ToolName of Parts Functional DescriptionModel Cordless Angle Drill DN12DYSpecifications Battery ChargerUC14YFA UC24YFA Applications Assembly and OperationRemoval and Installation Method of Battery Charging MethodDisconnect battery charger from the receptacle Insert the battery into the battery chargerInsert the plug of battery charger into the receptacle Remove the battery from the battery chargerInsert the battery to the battery charger RED Before USE OperationMounting and dismounting the bit Confirm that the battery is mounted correctly Switch operationCheck the rotational direction To use for drilling metal Maintenance and Inspection Accessories Standard AccessoriesBattery EB1212S, EB1220BL Informations Importantes DE Sécurité Signification DES Mots D’AVERTISSEMENTSecurite Conserver CES InstructionsAvertissement Lire et coxmprendre toutes les instructions Avertissement Regles DE Securite Specifiques ET Symboles NE Jamais toucher les parties mobilesManipuler l’outil motorisé avec précaution Ne pas essuyer les parties en plastique avec du solvantUC24YFA Tableau Mise AU Rebut D’UNE Batterie Usée Français NOM DES Parties Description FonctionnelleModele Perceuse dangle à batterie DN12DYChargeur de batterie UC14YF2/UC14YFA/CU24YFAModèle Méthode DE Retrait ET D’INSTALLATION DE LA Batterie UtilisationsMéthode DE Recharge Recharge Insérer la batterie dans le chargeur de batterieBrancher la fiche du chargeur de batterie dans la prise Débrancher le chargeur de batterie de la priseFrançais Comment prolonger la durée de vie des batteries Verte Avant L’UTILISATION Pose et dépose du foret Vérifiez si la batterie a été correctement installéeUtilisation Vérifiez la direction de rotationFonctionnement de l’interrupteur Utilisation pour percer du métalEntretien ET Inspection Accessoires Accessoires StandardAccessoires EN OPTION.....vendus séparément Batterie EB1212S, EB1220BLInformación Importante Sobre Seguridad Significado DE LAS Palabras DE SeñalizaciónSeguridad Guarde Estas InstruccionesAdvertencia Lea y entienda todas las instrucciones Advertencia Utilice la herramienta correcta Normas Y Símbolos Específicos DE SeguridadNo toque Nunca las piezas móviles Maneje correctamente la herramientaManeje con cuidado las herramientas eléctricas No limpie las partes de plástico con disolventeEspañol Recuerde Eliminación DE LAS Baterías Agotadas Español Nomenclatura Descripción FuncionalModelo Taladro angular a batería DN12DYEspecificaciones Cargador de bateríasModelo Método DE Extracción E Instalación DE LA Batería Montaje Y OperaciónAplicaciones Método DE CargaDesconecte el cargador de baterías del tomacorriente Inserte la batería en el cargador de bateríasCarga Extraiga la batería del cargador de bateríasInserte el enchufe del cargador de baterías En un tomacorrienteVerde Antes DE LA Utilización Confirmar que la batería está puesta correctamente OperaciónMontaje y desmontaje de la broca Examinar la dirección de rotaciónOperación del interruptor Cómo proceder para taladrar metalMantenimiento E Inspección Accesorios Accesorios EstándarAccesorios OPCIONALES.....de venta por separado Battería EB1212S, EB1220BLUC24YFA Page Page Page Hitachi Koki Canada Co
Top Page Image Contents