888 Digital S161, S156, S136 Other Hints on Carin for Your Ran e, Oven Light Bulb, Access Door

Other Hints on Carin for Your Ran e

Oven Light Bulb

Before replacing bulb, disconnect power to oven at the main fuse or circuit breaker

panel. Be sure that the entire oven .cavityincluding the light bulb is cool before attemptingto remove.

To replace light bulb:

1.Carefully remove the glass light lens and lens retainer by removingthe two screwsin the light lens retainer using a phillips screwdriver.

Note: The light lensisseparatefromthe light lens-

retainer.The two pieceswill drop down intoyour hands at the same time. Do NOT remove the remainingtwo screws.

2.To obtain firm grasp on bulb, wear protective rubbergloves.Removeby turningbulb to the left,

Do not touch a hot even'light bulb with a damp cloth as bulb will break, Note: If the bulb does

breakand you wishto removeit, be certainpower supply is disconnected and wear protective

gloves. You may contact your authorized Jenn-

Air ServiceContractorfor service.

3.Replacebulb with a 40 watt oven-rated appliance bulb. Bulb with brass base is recommendedto preventfusingof bulb into socket.

4.Place light lens insideof _ightlens retainer.Hold- ing the light lensand lens retainerin place,insert

the two screws into the light lens retainer and

tighten.;;

Access Door

The access door is easily removed to clean under the range if necessary. To remove door, pull door down and lift off pivot points. To replace door, slide door over pivot points; lift up and insert prongs into holes in the range.

To avoid the possibility of accidentally disconnecting any part of the ventilation system, do not use the area behind the access door for storage.

40