Sony SCPH-50011 Playing a game, Changing from one game to another, Vibration function

14 Playing a game (continued)

When not intending to play a game for an extended period of time

Turn the power off at the main power switch on the console rear and disconnect the power plug from the electrical socket.

Changing from one game to another

There is no need to turn off the console when you want to change games.

1 Press the A (open) button.

The disc tray opens.

2 Remove the disc.

3 Place a new disc in the disc tray.

4 Press the A button.

The disc tray closes.

5 Press the 1 (standby)/reset button to reset.

(Note: holding the 1/reset button down for any length of time may cause the console to go into standby mode.)

Using the analog controller (DUALSHOCK®2)

•The analog controller (DUALSHOCK®2) can be used with PlayStation®2 and PlayStation® format software.

•You can switch between digital and analog modes. When the controller is in analog mode, the following buttons and sticks may operate in analog fashion depending on the features supported by the software title. Refer to the software manual for details.

PlayStation®2 format software

Directional buttons, ¢ , a , ✕ , s buttons, left analog stick, right analog stick, L1, R1, L2, R2 buttons

PlayStation® format software

Left analog stick / right analog stick

•You can use the vibration function.

Using the analog controller (DUALSHOCK®) (sold separately)

•The analog controller (DUALSHOCK®) can also be used with PlayStation®2 and PlayStation® format software.

•You can switch between digital and analog modes. When in analog mode, you can enjoy the analog operation of the left analog stick and right analog stick.

PlayStation®2 format software

Left analog stick / right analog stick

PlayStation® format software

Left analog stick / right analog stick

•You can use the vibration function.

Mode switching and the mode indicator

The analog controller (DUALSHOCK®2) can be switched between two modes by pressing the analog mode button.

Each time the analog mode button is pressed, the mode changes as follows:

Digital mode (indicator: off)

Xx

Analog mode (indicator: red)

Note

Switch to the appropriate mode for use.

Note, however, that some software makes this adjustment automatically. In such cases, the analog mode button is overridden by the software. For details, refer to the software manual.

Vibration function

The analog controller (DUALSHOCK®2) features a vibration function when the function is supported by the software title. The vibration function can be set to ON or OFF on the software option screen.

Notes

•When the analog controller (DUALSHOCK®2) is not being used, turn the console off or unplug the controller from the console.

•Before using the vibration function, please read “Notes on safety when using the analog controller (DUALSHOCK®2)” on page 3.

Before using the analog controller (DUALSHOCK®2)

After turning the console on, rotate the left and right analog sticks once with your thumbs before starting a game. Do not twist the analog sticks, but rotate as if drawing a circle as shown in the diagram above.

After the start-up screen, screen 2 or 3 is displayed and the game begins.

5

1,4

2,3

Note

With a multi-disc game, follow steps 1 through 4 to switch discs. Refer to the software manual for details.

Digital mode (indicator: off)		Analog mode (indicator: red)
		L2 button	R2 button
L2 button	R2 button	L1 button	R1 button
		SELECT	START
L1 button	R1 button	button	button
SELECT	START		¢ button
button	button
	¢ button
		Directional	a button
Directional	a button	buttons
buttons			✕ button
	✕ button	Left analog stick /	s button
	s button	L3 button*	Right analog stick /
			R3 button*
ANALOG mode button	Mode indicator: Off	ANALOG mode button
			Mode indicator: Red

* The R3 and L3 buttons function when the sticks are pressed.