Tefal FV4190G0 manual Moistening the linen Spray, Vertical steam ironing depending on the model

What temperature and which steam setting to use ?			= STEAM ZONE
FABRIC	POSITION OF	STEAM SETTING
	THERMOSTAT CURSOR	POSITION
LINEN	MAX	MAX
COTTON	●●●
WOOL	●●	MIN
SILK	●	DRY
SYNTHETIC	●	DRY
Polyester, Acetate, Acrylic, Nylon

Moistening the linen (Spray)

- When steam or dry ironing, press several times on the Spray Button to moisten the linen (H) and to remove stubborn creases.

- Make sure that there is water in the tank before using this button.

Recommendations:

H

Fabrics and ironing temperatures:

•Your iron heats up quickly: begin by ironing those fabrics that are ironed at low temperatures, then go on to those requiring a higher temperature;

•If you turn down the thermostat, wait until the thermostat light comes back on before beginning to iron again.

•When ironing fabrics with mixed fibres, set the ironing temperature for the most delicate of the fibres.

	Obtaining more steam for removing wrinkles (depending on the model)
-	Press the Shot of steam button from time to time (I).
-	Wait a few seconds between each shot before pressing the button again.
	Vertical steam ironing (depending on the model)			I
-	Hang up the garment on a hanger and hold the fabric slightly
	taut with one hand.
- Set the thermostat control on MAX (J).
-	Press the Shot of steam button (	)repeatedly (K), moving
	the iron from top to bottom (L).
-	Hold the iron a few centimetres from the fabric to avoid
	burning delicate fabrics.	J	K	L	3