Auto-Stop safety feature (depending on the model)
-The electronic system cuts off the electric power and the
-To restart the iron, just move it gently until the warning light stops flashing.
Note:When the
2- DRY IRONING
-Set the steam control on DRY (see diagram A).
-Set the temperature.
-You may start ironing when the thermostat light goes out and comes on again.
3- MAINTAINING YOUR IRON
BE CAREFUL !
Unplug your iron and let it cool off before cleaning it.
•CLEANING THE ANTI-CALC VALVE (Once per month) :
-Unplug your iron and empty the water tank.
-To remove the
NEVER TOUCH THE END OF THE VALVE.
-Soak the rod in a cup of white spirit vinegar or plain lemon juice for 4 hours (O).
-Rinse the valve in tap water.
- Place the steam control on dry. - Replace the
THE IRON WILL NOT FUNCTION WITHOUT THE
O
•USING THE
In order to extend the life of your iron, use the
-Unplug your iron and set the steam control on DRY .
-Fill the water tank up to the limit (see recommendations for the types of water to use).
-Leave water tank filler cover open until the end of the operation
-Place your iron on its heel and set the thermostat control on MAX.
-Plug in your iron and wait until the thermostat light goes out.
-Unplug the iron and hold it over a sink in the horizontal position.
4- Place the steam control on MAX.
M
N