HP xw460c Blade Osfp Area Index configuration, Md5key 1-255 characters, Redist fixedstaticrip

The following table describes the Open Shortest Path First Menu options.

Table 134 OSPF Configuration Menu options

Command	Description
aindex <0-2>	Displays the area index menu. This area index does not represent the
	actual OSPF area number.
range <1-16>	Displays summary routes menu for up to 16 IP addresses.
if <1-256>	Displays the OSPF interface configuration menu.
virt <1-3>	Displays the Virtual Links menu used to configure OSPF for a Virtual
	Link.
md5key <1-255 characters>	Assigns a string to MD5 authentication key.
host <1-128>	Displays the menu for configuring OSPF for the host routes. Up to 128
	host routes can be configured. Host routes are used for advertising
	network device IP addresses to external networks to perform server load
	balancing within OSPF. It also makes Area Border Route (ABR) load
	sharing and ABR failover possible.
redist <fixedstaticrip>	Displays Route Distribution Menu.
lsdb <0-2000>	Sets the link state database limit. Enter 0 (zero) for no limit.
default <1-16777215> 12>none	Sets one default route among multiple choices in an area.
	Enter none for no default route.
on	Enables OSPF.
off	Disables OSPF.
cur	Displays the current OSPF configuration settings.

OSFP Area Index configuration

Command: /cfg/l3/ospf/aindex <0-2>

[OSPF Area (index) 1 Menu]

areaid	- Set area ID
type	- Set area type
metric	- Set stub area metric
auth	- Set authentication type
spf	- Set time interval between two SPF calculations
enable	- Enable area
disable	- Disable area
delete	- Delete area
cur	- Display current OSPF area configuration

NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.

Configuration Menu 131