HP xw460c Blade manual Layer 2 information, Cfg/sys/access/user/uid command, 8021x Stp

The following table describes the User Name information.

Table 17 User Name Information menu

	Field			Usage
	user			Displays the status of the user access level.
	oper			Displays the status of the oper (operator) access level.
	admin			Displays the status of the admin (administrator) access level.
	Current User ID Table			Displays the status of configured user IDs. To configure new user IDs, use the
				/cfg/sys/access/user/uid command.
Layer 2 information
	Command: /info/l2
		[Layer 2 Menu]
		fdb	- Forwarding Database Information Menu
		lacp	- Link Aggregation Control Protocol Menu
		8021x	- Show 802.1x information
		stp	- Show STP information
		cist	- Show CIST information
		trunk	- Show Trunk Group information
		vlan	- Show VLAN information
		gen	- Show general information
		dump	- Dump all layer 2 information

The following table describes the Layer 2 Information Menu options.

Table 18 Layer 2 Information Menu options

Command	Usage
fdb	Displays the Forwarding Database Information Menu.
lacp	Displays the Link Aggregation Control Protocol Information Menu.

8021x

stp

Displays the 802.1x Information Menu.

In addition to seeing if STP is enabled or disabled, you can view the following STP bridge information:

•Priority

•Hello interval

•Maximum age value

•Forwarding delay

•Aging time

You can also refer to the following port-specific STP information:

•Port number and priority

•Cost

•State

cist	Displays Common internal Spanning Tree (CIST) bridge information,
	including the following:
	•	Priority
	•	Hello interval
	•	Maximum age value
	•	Forwarding delay

You can also view port-specific CIST information, including the following:

•Port number and priority

•Cost

•State

Information Menu 32