Show all FDB information
Command: /info/l2/fdb/dump
MAC address | VLAN | Port | Trnk | State |
00:02:01:00:00:00 | 300 |
| 1 | TRK |
00:02:01:00:00:01 | 300 | 23 |
| FWD |
00:02:01:00:00:02 | 300 | 23 |
| FWD |
00:02:01:00:00:03 | 300 | 23 |
| FWD |
00:02:01:00:00:04 | 300 | 23 |
| FWD |
00:02:01:00:00:05 | 300 | 23 |
| FWD |
00:02:01:00:00:06 | 300 | 23 |
| FWD |
00:02:01:00:00:07 | 300 | 23 |
| FWD |
00:02:01:00:00:08 | 300 | 23 |
| FWD |
00:02:01:00:00:09 | 300 | 23 |
| FWD |
00:02:01:00:00:0a | 300 | 23 |
| FWD |
00:02:01:00:00:0b | 300 | 23 |
| FWD |
00:02:01:00:00:0c | 300 | 23 |
| FWD |
|
|
|
|
|
An address that is in the forwarding (FWD) state indicates that the switch has learned it. When in the trunking (TRK) state, the Trnk field displays the trunk group number. If the state for the port is listed as unknown (UNK), the MAC address has not yet been learned by the switch, but has only been seen as a destination address. When an address is in the unknown state, no outbound port is indicated.
Clearing entries from the forwarding database
To delete a static MAC address from the forwarding database (FDB), see the “Static FDB configuration” section in the “Configuration Menu” chapter. To clear the entire forwarding database (FDB), see the “Forwarding Database options” section in the “Maintenance Menu” chapter.
Link Aggregation Control Protocol information
Command: /info/l2/lacp
[LACP Menu] |
|
aggr | - Show LACP aggregator information for the port |
port | - Show LACP port information |
dump | - Show all LACP ports information |
|
|
The following table describes the Link Aggregation Control Protocol Menu options.
Table 20 | LACP information |
|
|
Command | Usage |
|
|
aggr | Displays LACP aggregator information for the port. |
|
|
port | Displays LACP information for the port. |
|
|
dump | Displays all LACP information parameters. |
|
|
Information Menu 34