HP xw460c Blade manual SNMPv3 configuration, Name 1-64 characters, Characters

Page 97

•SNMP parameters that can be modified include:

•System name

•System location

•System contact

•Use of the SNMP system authentication trap function

•Read community string

•Write community string

The following table describes the System SNMP Configuration Menu options.

Table 84 System SNMP Configuration Menu options

Command		Description

snmpv3		Displays SNMPv3 menu.

name <1-64 characters>		Configures the name for the system. The name can have a maximum of 64 characters.

locn <1-64	characters>	Configures the name of the system location. The location can have a maximum of 64
		characters.

cont <1-64	characters>	Configures the name of the system contact. The contact can have a maximum of 64
		characters.

rcomm <1-32 characters> Configures the SNMP read community string. The read community string controls SNMP “get” access to the switch. It can have a maximum of 32 characters. The default read community string is public.

wcomm <1-32 characters> Configures the SNMP write community string. The write community string controls SNMP “set” and “get” access to the switch. It can have a maximum of 32 characters. The default write community string is private.

timeout <1-30>	Sets the timeout value for the SNMP state machine. The range is 1-30 minutes. The
	default value is 5 minutes.

auth disableenable	Enables or disables the use of the system authentication trap facility. The default setting
	is disabled.

linkt <port>	Enables or disables the sending of SNMP link up and link down traps. The default
[disableenable]	setting is enabled.

ufd	Enables or disables the sending of Uplink Failure Detection traps. The default setting is
	disabled.

cur	Displays the current SNMP configuration.

SNMPv3 configuration

Command: /cfg/sys/ssnmp/snmpv3

[SNMPv3 Menu]
usm	- usmUser Table Menu
view	- vacmViewTreeFamily Table Menu
access	- vacmAccess Table Menu
group	- vacmSecurityToGroup Table Menu
comm	- community Table Menu
taddr	- targetAddr Table Menu
tparam	- targetParams Table Menu
notify	- notify Table Menu
v1v2	- Enable/disable V1/V2 access
cur	- Display current SNMPv3 configuration

Configuration Menu 97

Image 97

Contents HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Page Contents Statistics Menu Configuration Menu 111 Index Command line interface Introduction Connecting to the switchAdditional references Establishing a console connectionTelnet GbE2c Ethernet Blade Switch IP address Setting an IP addressEstablishing a Telnet connection Establishing an SSH connection# ssh user@GbE2c Ethernet Blade Switch IP address Accessing the switchIdle timeout AaBbCc123 Typographical conventionsMenu summary Main MenuDelay Global commandsTraceroute host name IP address max-hops msec Telnet hostname IP address port Command line history and editingCommand stacking Command line interface shortcutsCommand abbreviation Tab completion# /cfg/sys/access/snmp disableread onlyread/write Configuring Simple Network Management Protocol supportMain# /cfg # /cfg/sys/ssnmp/rcommwcommChanging the default administrator password Setting passwordsSystem# apply System# save Changing the default user password Changing the default operator password Menu overview Information MenuSNMPv3 Information Menu System Information MenuSNMPv3 USM User Table information AdminshaComm V1v2onlySNMPv3 View Table information SNMPv3 Access Table informationSNMPv3 Community Table information SNMPv3 Group Table informationPrefix SNMPv3 Target Parameters Table information SNMPv3 Target Address Table informationSNMPv3 Notify Table information Command /info/sys/snmpv3/notify NameTag V1v2trapv1v2trapSec Level SNMPv3 dump System information System user information Show last 100 syslog messagesLayer 2 information Cfg/sys/access/user/uid command8021x Stp Find MAC address Vlan FDB information menuPort port number Show all FDB information Link Aggregation Control Protocol informationLacp dump 802.1x information Authenticator PAE State Port Auth ModeCommand /info/l2/stp Spanning Tree informationPath-Cost Current RootPriority bridge HelloDesignated port Rapid Spanning Tree and Multiple Spanning Tree informationDesg 8017 P2P2,Edge Desg 8018Disabled DSB Common Internal Spanning Tree information Trunk group information Disabled DSBDiscarding Disc , Learning LRN , Forwarding FWD , or Layer 2 general information Vlan informationLayer 3 information Find IP address Route informationGw IP address If IP addressShow all IP Route information ARP information Command /info/arp/dump IP address Flags MAC addressShow all ARP entry information VlanNbr nbr router-id A.B.C.D Ospf informationDbase Sumaddr Nsumadd Routes Dump Ospf interface information Ospf general informationOspf Database information menu Asbrsum adv-rtr A.B.C.D Linkstateid A.B.C.Dself Advrtr router-id A.B.C.DExt adv-rtr A.B.C.D linkstateid A.B.C.Dself Nw adv-rtr A.B.C.D linkstateid A.B.C.DselfRouting Information Protocol information Ospf route codes informationRIP Routes information IP information RIP user configurationIgmp multicast group information Igmp multicast router port information Command /info/l3/vrrp Vrrp informationVrrp information 802.1p information QoS informationQoS Menu 8021p Show QOS 802.1p information 8021pRmon Information Menu ACL informationInterval Rmon history informationCommand /info/rmon/event Rmon alarm informationRmon event information Link status information Port information Command /info/port Port Tag Rmon PvidVLANs Uplink Failure Detection Enabled LtM status Down Member Command /info/geaport Logical Port GEA Port0-based GEA UnitLogical Port to GEA Port mapping Uplink Failure Detection informationInformation dump Command /info/dumpNtp clear Menu informationUfd clear Port Statistics Menu 802.1x statistics AuthenticatingAuthSuccessesWhile BackendNonNakResponsesFrom Bridging statisticsSupplicant Ethernet statistics Dot3StatsInternalMacTransmitErrors Dot3StatsFCSErrorsDot3StatsSingleCollisionFrames Dot3StatsMultipleCollisionFramesInterface statistics Link statistics Internet Protocol IP statisticsPort Rmon statistics FDB statistics Layer 2 statisticsLayer 3 statistics Lacp statisticsArp clear Clrigmp 1- 4095 allGEA Layer 3 statistics GEA Layer 3 statistics menuIP statistics L3 bucket for An IP address DumpARP statistics Route statisticsIcmp statistics DNS statisticsTCP statistics UDP statistics Igmp Multicast Group statistics Command /stats/l3/ospfOspf statistics menu Ospf stats MenuOspf global statistics Nbr change Tx ls UpdatesVrrp statistics Timers KickoffManagement Processor statistics Command /stats/l3/ripRIP statistics Packet statistics10ad41e8/10ad5790 AllocsCPU statistics Access Control List ACL statistics menuACL statistics Snmp statistics Only NTP statistics Uplink Failure Detection statistics Command /stats/dumpStatistics dump Number of times LtM link in BlockingConfiguration Menu Viewing, applying, reverting, and saving changes Saving the configurationViewing pending changes Applying pending changesReminders System configurationLine to end System host log configurationBannr 1-80 characters Host IP addressConsole disableenable Secure Shell Server configurationLog featureall enabledisable Command /cfg/sys/radius Radius server configurationIntrval Sshport TCP port numberTACACS+ server configuration Port TCP port number Telnet enabledisableSystem Snmp configuration NTP server configurationDlight disableenable Command /cfg/sys/ssnmpName 1-64 characters SNMPv3 configurationCharacters V1v2 disableenable User Security Model configurationName 1-32 characters SNMPv3 View configurationTree 1-32 characters Mask 1-32 charactersSNMPv3 Group configuration View-based Access Control Model configurationUsmsnmpv1snmpv2 Level NoAuthNoPrivauthNoUsmsnmpv1snmpv2 Uname SNMPv3 Community Table configurationDel Deletes the vacmSecurityToGroup entry Cur SNMPv3 Target Parameters Table configuration SNMPv3 Target Address Table configurationAddr transport Address ip Port transportSnmpv1snmpv2csnmp Model SNMPv3 Notify Table configurationManagement Networks configuration System Access configurationUser ID configuration User Access Control configurationUseroperadmin Name Https Access configuration Port configurationAccess enabledisable Name 1-64 characters none Temporarily disabling a port Port link configuration802.1x configuration Layer 2 configurationPort ACL/QoS configuration Mode force 802.1x Global configurationUnauthautoforce-auth Reauth onoff 802.1x Port configurationRev Mode rstpmstpBridge parameter menu Common Internal Spanning Tree configurationPort parameter menu 4095Cist port configuration Cist bridge configurationEdge disableenable Spanning Tree configurationCost Link autop2psharedBridge Spanning Tree configuration Cur Display current port Spanning Tree parameters Spanning Tree port configurationStatic FDB configuration Forwarding Database configurationFastfwd disableenable MAC address Vlan port Trunk configurationClear mac MAC AddressVLAN 1-4095 Port port numberAll Add port numberLayer 2 IP Trunk Hash configuration IP Trunk Hash configurationLink Aggregation Control Protocol configuration Vlan configuration Lacp Port configurationTimeout shortlong Mode offactivepassivePort number Layer 3 configurationList of port numbers Addr IP address IP interface configurationMask IP subnet mask Default Gateway configuration IP Static Route configurationIP Forwarding configuration Address Resolution Protocol configurationNetwork Filter configuration Dirbr disableenableAp AS number AS number AS Route Map configurationLp 0-4294967294 none Autonomous System Path configuration IP Access List configurationMetric 1-4294967294none Action permitdenyRouting Information Protocol configuration RIP Interface configuration RIP Route Redistribution configuration Open Shortest Path First configurationAdd 1-32 1-32all Remove 1-32 1-32allDefault 1-16777215 12none Osfp Area Index configurationMd5key 1-255 characters Redist fixedstaticripAuth nonepasswordmd5 Ospf Summary Range configurationAreaid IP address Type transitstubnssaMask IP address mask Ospf Interface configurationKey key stringnone Mdkey 1-255noneKey password Ospf Virtual Link configurationNbr IP address Ospf Route Redistribution configuration Ospf Host Entry configurationRem 1-32 1-32 ... all Export 1-16777215 12noneOspf MD5 Key configuration Igmp configurationAggr disableenable Igmp snooping configurationFastlv 1-4095 disableenable Srcip IP addressIgmp filtering configuration Igmp static multicast router configurationAdd port number 1-4095 FilterIgmp filter definition Igmp filtering port configurationRange IP multicast address IP Multicast addressDomain Name System configuration Bootstrap Protocol Relay configurationVrrp Virtual Router configuration Virtual Router Redundancy Protocol configurationPreem disableenable Vrrp Virtual Router Group configuration Vrrp Virtual Router Priority Tracking configurationVrs disableenable Ifs disableenableVrrp Virtual Router Group Priority Tracking configuration Vrrp Tracking configuration Vrrp Interface configurationPassw password Access Control configuration Quality of Service configurationQoS 802.1p configuration Egrport port number Access Control List configurationAction permitdenysetprio Stats edACL IP Version 4 Filter configuration ACL Ethernet Filter configurationSport 1-65535 port mask ACL TCP/UDP Filter configurationFlags value 0x0-0x3f ACL Re-mark configuration ACL Meter configurationEnable ed CirACL Re-mark In-Profile Update User Priority configuration ACL Re-mark In-Profile configurationACL Re-mark Out-of-Profile configuration ACL Packet Format configuration Remote Monitoring configurationACL Group configuration Ifoid 1-127 characters Rmon history configurationOwner 1-127 characters Rmon alarm configuration Rmon event configurationDescn 1-127 characters Type nonelogtrapbothRlimit -2147483647 to Port mirroring2147483647 Flimit -2147483647 toPort-based port mirroring Uplink Failure Detection configurationAdd mirrored port inoutboth Rem mirrored portLink to Monitor configuration Failure Detection Pair configurationAddport port number Remport port numberLink to Disable configuration Saving the active switch configurationDump Addport port number Remport port numberCommand /cfg/gtcfg FTP/TFTP server filename Restoring the active switch configurationConfiguration# gtcfg FTP/TFTP server filename Operations-level port options Operations MenuOperations-level port 802.1x options Reset ReauthOperations-level Vrrp options Downloading new software to the switch Updating the switch software imageAddress Selecting a software image to runSelecting a configuration block Uploading a software image from the switchBoot Options# ptimg Boot Options# confAccessing the Iscli Resetting the switchBoot Options# reset Boot Options# curMaintenance Menu Forwarding Database options System maintenance optionsFlags new Nvram flags word as 0xXXXXXXXXARP cache options Debugging optionsIgmp Multicast Group options IP Route Manipulation optionsBroadcastmartian Igmp Mrouter options Igmp Snooping optionsFTP/TFTP system dump put Uuencode flash dumpClearing dump information Command /maint/panic Panic commandConfirm dump and reboot y/n y Unscheduled system dumpsIndex

Related manuals

Manual 33 pages 57.51 Kb