OSPF general information
NOTE: OSPF commands are available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
Command: /info/l3/ospf/general
OSPF Version 2
Router ID: 10.10.10.1
Started at 1663 and the process uptime is 4626 Area Border Router: yes, AS Boundary Router: no LS types supported are 6
External LSA count 0 External LSA checksum sum 0x0
Number of interfaces in this router is 2 Number of virtual links in this router is 1
16 new lsa received and 34 lsa originated from this router Total number of entries in the LSDB 10
Database checksum sum 0x0 Total neighbors are 1, of which
2 are >=INIT state,
2 are >=EXCH state,
2 are =FULL state
Number of areas is 2, of which
Authentication : none
Import ASExtern : yes
Number of times SPF ran : 8
Area Border Router count : 2
AS Boundary Router count : 0
LSA count : 5
LSA Checksum sum : 0x2237B
Summary : noSummary
OSPF interface information
NOTE: OSPF commands are available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
Command: /info/l3/ospf/if
Ip Address 10.10.12.1, Area 0.0.0.1, Admin Status UP
Router ID 10.10.10.1, State DR, Priority 1
Designated Router (ID) 10.10.10.1, Ip Address 10.10.12.1
Backup Designated Router (ID) 10.10.14.1, Ip Address 10.10.12.2
Timer intervals, Hello 10, Dead 40, Wait 1663, Retransmit 5,
Transit delay 1
Neighbor count is 1 If Events 4, Authentication type none
OSPF Database information menu
Command: /info/l3/ospf/dbase
[OSPF Database Menu]
advrtr | - LS Database info for an Advertising Router |
asbrsum | - ASBR Summary LS Database info |
dbsumm | - LS Database summary |
ext | - External LS Database info |
nw | - Network LS Database info |
nssa | - NSSA External LS Database info |
rtr | - Router LS Database info |
self | - Self Originated LS Database info |
summ | - |
all | - All |
NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
The following table describes the OSPF Database information menu options.
Table 33 OSPF Database information
Information Menu 48