•“Viewing paths” (page 44)
•“Viewing replications” (page 47)
Viewing related host information
To view information about a selected host, hosts where the selected VM's storage is presented, or hosts where the selected datastore's storage is presented:
1.Select a VM, host, or datastore in the inventory tree.
2.Click the HP Insight Software tab.
3.Click Related Hosts in the Storage Information section of the HP Management pane. The Related Hosts of Host System, Datastore, or Virtual Machine name page appears.
Viewing summary information
The Related Hosts of Host System, Datastore, or Virtual Machine page displays the following information about related hosts:
•Name: Host name
•HP Storage Provisioned Capacity: Amount of storage available to the host from HP storage arrays
•HP Storage Used Capacity: Amount of storage from HP storage arrays that is used by the host
Viewing detailed information
To view detailed information about a host:
1.Click the row of a host in the Related Hosts table.
2.Click the Storage Disks, HBAs, Paths, or Replications tab.
For information about the values displayed in these tabs, see:
•“Viewing storage disks” (page 42)
•“Viewing HBAs” (page 44)
•“Viewing paths” (page 44)
•“Viewing replications” (page 47)
Viewing detailed storage information
When you view information in the HP Insight Software tab, summary information is displayed in the top half of the page and detailed information is divided into tabs that are displayed in the lower half of the page. Click a tab to view detailed information about a selected host, VM, or datastore. For example, “Detailed information tabs” (page 41) shows the tabs you can click for a Host.
Figure 17 Detailed information tabs
Using the Storage Module for vCenter 41